

Sonar Controller
An ESP32 project that uses a sonar depth sensor to measure the water level of a cistern tank.
- Size
- 67 × 42 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 63
- Pads
- 214
- Tracks, vias
- 282, 56
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Dec 2025
- Updated
- 20 Dec 2025
Overview
Sonar Controller is an open-source printed circuit board by haydenmc, from the haydenmc/McAfee-Farm-Sonar-Controller repository on GitHub. It is a 4-layer board of 67 × 42 mm with 59 parts on 63 nets, routed with 282 tracks and 56 vias.
It is built around the ESP32-S3-WROOM-1-N8, SN74LV1T34DBV and AP63203WU, with the BQ25185DLHR, USBLC6-2SC6 and 0ZCH0110AF2E among its other parts. Its parts include 14 resistors, 13 capacitors, 5 ICs, 5 diodes and 5 connectors. It belongs with the ESP32 boards of this library.
Main components
8ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesSN74LV1T34DBV
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 10uA 5.5ns@5V,15pF 74LV 8mA 8mA Level shifting Push-pull Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversAP63203WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.3V 3.8V~32V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersBQ25185DLHR
WSON-10-EP(2.2x2)-40℃~+125℃ 1 1A 2.2V 3V~18V 4.4V 4uA Charging IC Lithium Battery、LiFePO4 Battery Support WSON-10-EP(2.2x2) Battery Management ROHSTexas InstrumentsBattery ManagementUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)0ZCH0110AF2E
1210-40℃~+85℃ 1.1A 100A 16V 2.2A 210mΩ 300ms 60mΩ 1210 Resettable Fuses ROHSBel FuseResettable FusesSSM3J328R,LF(T
SOT-23FSOT-23F New Arrivals ROHSToshibaUncategorisedUSB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C5, C6, C11, C12 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R7, R8, R10, R13, R14 |
| 3 | 0ZCH0110AF2E | Fuse:Fuse_1210_3225Metric_Pad1.42x2.65mm_HandSolder | F1, F2, F3 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C10, C13 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C8, C9 |
| 3 | B0520WS-7-F | Diode_SMD:D_SOD-323_HandSoldering | D1, D2, D5 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R5 |
| 2 | 1825910-6 | 1825910-6:SW_1825910-6-4 | SW1, SW2 |
| 2 | 282837-2 | 282837-2:TE_282837-2 | J3, J4 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R9 |
| 2 | SMF7V0A | Diode_SMD:D_SMF | D3, D4 |
| 1 | 180k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 18k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 282837-3 | 282837-3:TE_282837-3 | J5 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | 4.7uH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | 600 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 82k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U4 |
| 1 | BATTERY | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | BQ25185DLHR | BQ25185:WSON10_DLH_TEX | U3 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1U | U1 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | RX | TestPoint:TestPoint_Pad_D1.5mm | TP6 |
| 1 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | SSM3J328R_LF | SSM3J328R_LF:SOT95P240X88-3N | Q1 |
| 1 | STAT1 | TestPoint:TestPoint_Pad_D1.5mm | TP7 |
| 1 | STAT2 | TestPoint:TestPoint_Pad_D1.5mm | TP8 |
| 1 | TX | TestPoint:TestPoint_Pad_D1.5mm | TP5 |
| 1 | USB4105-GF-A | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | VIN | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | VSYS | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
The 57 most common of 59 parts.
Similar boards
- 4 layers100 × 80 mm

- 4 layers125 × 100 mm

Macropad
Michael-Lloyd/macropad
A simple macropad powered by an 18650, with bluetooth capabilities.
66 parts - 4 layers42 × 40 mm

Click counter Q2
dudgeon/count-fidget
A lightweight, rechargeable two-key fidget that counts clicks, resets with a second key, and remembers its count while asleep or unpowered. Designed for a home-printed enclosure and professionally assembled electronics.
62 parts - 4 layers108.5 × 60 mm

ESP32 BME690
andrewcnjuguna/ESP32_BME690
Multi-room ESP32-S3 environmental sensor node that streams air-quality data to a Node.js server over Wi-Fi. Built around the Bosch BME690 with auxiliary light, sound and battery monitoring.
98 parts - 2 layers80 × 40 mm

Cryptick token pcb
alphaseneca/cryptick-token-pcb
Hardware schematics, 2-layer PCB layout, and manufacturing files for Cryptick Token — the 100% open-source biometric hardware security key and cryptographic hardware enclave.
56 partsMIT - 2 layers150 × 101 mm

Smart scale
wngxp/smart-scale
Work-in-progress ESP32-S3 smart food scale with custom PCB, enclosure CAD, firmware, mobile app, and backend.
97 parts - 4 layers70 × 67 mm

Pairing voice pcb v11 70x67
windmoondreamer/pairing-voice-cube
아이가 목소리를 녹음하고, 부모가 버튼을 눌러 재생하는 장치의 회로기판 프로젝트. 80mm 큐브 케이스 · 최대 45초 녹음 · 내장 플래시 · 배터리 구동.
48 parts - 2 layers203.1 × 108.1 mm

ESP32 Breakouts Playground
PockyBum522/cad-pcb-projects
Various PCB projects, mostly in KiCad
117 parts2MIT
Questions
How big is the Sonar Controller PCB?
It measures 67 × 42 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Sonar Controller use?
59 parts, built around the ESP32-S3-WROOM-1-N8, SN74LV1T34DBV, AP63203WU and BQ25185DLHR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sonar Controller KiCad files?
From the haydenmc/McAfee-Farm-Sonar-Controller repository on GitHub, at the commit this page was made from: the board is kicad/Sonar-Controller.kicad_pcb and its schematic kicad/Sonar-Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sonar Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask haydenmc before reusing the design.