

BluetoothClassD
- Size
- 81 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 134
- Nets
- 103
- Pads
- 397
- Tracks, vias
- 638, 385
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 4 Aug 2026
- Updated
- 6 Nov 2026
Overview
BluetoothClassD is an open-source printed circuit board by smileym4n-collab, from the smileym4n-collab/Kicadprojects repository on GitHub. It is a 2-layer board of 81 × 85 mm with 134 parts on 103 nets, routed with 638 tracks and 385 vias.
It is built around the ESP32-WROOM-32UE-N8R2, TLV9362ID and MCP6H01-E/OT, with the PCM5121PW, LD1117 and TPS7A2033DQN among its other parts. Its parts include 60 capacitors, 45 resistors, 10 ICs, 6 connectors and 1 transistor. It belongs with the ESP32 boards of this library.
Main components
7ESP32-WROOM-32UE-N8R2
SMD-38PSMD-38P WiFi Modules ROHSEspressif SystemsWiFi ModulesTLV9362ID
SOIC-8-20V~-2.25V、2.25V~20V -40℃~+125℃ 1.25uV/℃ 10.6MHz 10pA 10pA 110dB 2 2.6mA 25V/us 4.5V~40V 400uV 60mA 6nV/√Hz@1kHz ESD protection、EMI filtering/RF suppression Rail-to-rail output SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierMCP6H01-E/OT
SOT-23-5-40℃~+125℃ 1 1.2MHz 10pA 125uA 1pA 2.5uV/℃ 3.5mV 30nV/√Hz@10kHz 50mA 800V/ms 93dB Built-in compensation Rail-to-rail output SOT-23-5 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierPCM5121PW
TSSOP-28-25℃~+85℃ 2 24 3.3V~3.6V Digital filtering、Power-down mode SPI、I2S TSSOP-28 Digital to Analog Converters (DAC) ROHSTexas InstrumentsADCs/DACs - Special PurposeLD1117
UncategorisedSTMicroelectronicsTPS7A2033DQN
X2SON-4(1x1)-40℃~+125℃ 1 140mV 3.3V 300mA 6.5uA 6V 7uVrms 95dB@(1kHz) Over Current Protection、Over Temperature Protection、Soft Start、Enable Positive X2SON-4(1x1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsUncategorisedDMP4015SPS
TDSON-8-EP(5x6)-55℃~+150℃ 1 P-Channel 1.036nF 15mΩ@4.5V 17A 2.1W 2.5V 4.234nF 40V 47.5nC@5V 526pF P-Channel TDSON-8-EP(5x6) MOSFETs ROHSDiodes IncorporatedMOSFETs
Parts
134| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3, C33, C34, C40, C43, C48, C53, C55, C56, C58 |
| 6 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C17, C18, C39, C46, C47 |
| 5 | 100nF* | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C22, C41, C42, C45, C50 |
| 5 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14, R31, R32, R33 |
| 5 | 220nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23, C24, C25, C26, C59 |
| 4 | 10nF* | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13, C14, C15 |
| 4 | 1nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C27, C28, C29, C30 |
| 4 | 1uF | Capacitor_THT:C_Rect_L7.2mm_W5.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C5, C8, C10, C11 |
| 4 | 220R 100 MHz | Inductor_SMD:L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | FB1, FB2, FB3, FB4 |
| 4 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34, R35, R36, R40 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 4 | RX* | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5 |
| 3 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26, R38, R41 |
| 3 | 100R* | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19, R24 |
| 3 | 22R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R11 |
| 2 | 0R* | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R37, R43 |
| 2 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29, R30 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C35, C36 |
| 2 | 10K* | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R12 |
| 2 | 10uF* | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C9, C61 |
| 2 | 15K* | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R20 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28, R42 |
| 2 | 1nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C31, C32 |
| 2 | 2.2nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19, C20 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21, C57 |
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C49, C51 |
| 2 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16 |
| 2 | 470pF* | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 2 | 47K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R44, R45 |
| 1 | 100-470uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C52 |
| 1 | 100K* | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23 |
| 1 | 10R* | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C54 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 13K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R39 |
| 1 | 1M* | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1uF* | Capacitor_THT:C_Rect_L7.2mm_W5.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C38 |
| 1 | 2200uF | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C16 |
| 1 | 22R* | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C44 |
| 1 | 47uF* | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C37 |
| 1 | 5K6 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 6.8uH | Custom:SRP6030WA-6R8M | L1 |
| 1 | BOOT | Custom:TS026650BK100SCRD | IC3 |
| 1 | DAC | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R63 |
| 1 | DMP4015 | Custom:DMP4015SK313 | Q1 |
| 1 | ESP32-WROOM-32UE-N8R2 | Custom:ESP32WROOM32UEN8R2 | IC1 |
| 1 | HI/L OUT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | L-IN | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R64 |
| 1 | LD1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LINE IN | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | LMR51430 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U6 |
| 1 | LOGO | Custom:ClassDSmall | G*** |
| 1 | LOGO | Custom:LOGONEW | G*** |
| 1 | LOW/R OUT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | MCP6H01* | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | PCM5121 | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U3 |
| 1 | PROG | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | RESET | Custom:TS026650BK100SCRD | IC2 |
| 1 | SYSTEM CONNECTOR 1 | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J1 |
| 1 | SYSTEM CONNECTOR 2 | Connector_JST:JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J6 |
| 1 | T3A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | TLV9362* | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | TPA3130 | Custom:TPA3130D2DAPR | U7 |
| 1 | TPS7A2033 | Custom:SOT95P280X145-5N | IC4 |
More from smileym4n-collab/Kicadprojects
12- 2 layers100 × 150 mm

- 4 layers100 × 100 mm

- 4 layers163.5 × 99.1 mm

- 4 layers100 × 100 mm

- 2 layers150 × 110 mm

- 2 layers162 × 107.4 mm

- 4 layers100 × 70 mm

- 4 layers90 × 90 mm

- 2 layers100 × 80 mm

- 2 layers120 × 120 mm

- 4 layers94.2 × 69.7 mm

- 4 layers100 × 86.5 mm

Similar boards
- 4 layers65 × 30 mm

VoltaStreamZERO
JulianVolodia/voltastream0-kicad
KiCad PCB files for high quality audio board with NXP i.MX6ULL processor - ARM Cortex-A7 @ 996MHz; 0.5G/1G RAM; TI PCM5121 or PCM5142 DACs; with RTC
128 parts - 4 layers170 × 100 mm

- 4 layers91.9 × 56.3 mm

Readout 64x64 regulated
tactilearena/tactilearena.github.io
Scalable high-density tactile arenas for measuring ground-contact forces in freely moving animals: hardware design files, firmware, acquisition and analysis software, and the project website.
66 parts1MIT - 6 layers60 × 30 mm

Udsp card
crsknr/hw_udsp-card
A compact DSP development board for real-time embedded audio and sensing
221 parts2GPL-3.0 - 4 layers91.9 × 53.2 mm

Phoenix main board
Phalkon-Industries/phoenix-instrument
Git repo for the content of the new Phoenix ph handheld instrument.
117 parts2CERN-OHL-S-2.0 - 4 layers88 × 58 mm

BIOCHEST ECG EMG
8aChristian/BIOCHEST-ECG-EMG
Figure 1: Full 4-Layer High-Density Medical PCBA with Galvanic Isolation Barrier & Routed Copper Tracks.
29 parts - 6 layers178 × 118 mm

MoriShield Carrier 6L
aswinserigreen/morishield_hardware
all components bom , pcb layouts and schematics of morishield is maintained here
157 parts - 4 layers71 × 42.8 mm

CadProd compact
botsqerebot/AudioDeck
Everything to change, check and test for rev 2. The main goal is power saving while the player is off:
83 parts
Questions
How big is the BluetoothClassD PCB?
It measures 81 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BluetoothClassD use?
134 parts, built around the ESP32-WROOM-32UE-N8R2, TLV9362ID, MCP6H01-E/OT and PCM5121PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BluetoothClassD KiCad files?
From the smileym4n-collab/Kicadprojects repository on GitHub, at the commit this page was made from: the board is BluetoothClassD/BluetoothClassD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BluetoothClassD design in my own project?
Its repository states no licence, so its author keeps all rights: ask smileym4n-collab before reusing the design.