

BIOCHEST ECG EMG
Figure 1: Full 4-Layer High-Density Medical PCBA with Galvanic Isolation Barrier & Routed Copper Tracks.
- Size
- 88 × 58 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 28
- Pads
- 195
- Tracks, vias
- 406, 60
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 Aug 2026
- Updated
- 4 Sep 2026
Overview
BIOCHEST ECG EMG is an open-source printed circuit board by 8aChristian, from the 8aChristian/BIOCHEST-ECG-EMG repository on GitHub. It is a 4-layer board of 88 × 58 mm with 29 parts on 28 nets, routed with 406 tracks and 60 vias.
It is built around the B0503S-1WR3, ESP32-S3-MINI-1-N8 and AP2112K-3.3, with the BQ24075RGT, TPS7A2033DQN and TPD2E001DZD among its other parts. Its parts include 8 ICs, 7 capacitors, 6 connectors, 5 diodes and 2 switches. It belongs with the ESP32 boards of this library.
Main components
6B0503S-1WR3
SIP,11.7x6mm-40℃~+105℃ 1 1.5kV 10.2mm 11.68mm 1W 200kHz~340kHz 2400uF 3.3V 303mA 30mVp-p 4.5V~5.5V 6mA 6mm 74% Short Circuit Protection 塑封型 非稳压型 SIP,11.7x6mm Isolated Power Modules ROHSEVISUNIsolated Power ModulesESP32-S3-MINI-1-N8
SMD-104.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3FN8 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi ModulesAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedBQ24075RGT
QFN-16-EP(3x3)-40℃~+125℃ 1.5A 4.2V 4.35V~6.4V 6.5uA Charging IC Lithium Battery Not supported Support QFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery ManagementTPS7A2033DQN
X2SON-4(1x1)-40℃~+125℃ 1 140mV 3.3V 300mA 6.5uA 6V 7uVrms 95dB@(1kHz) Over Current Protection、Over Temperature Protection、Soft Start、Enable Positive X2SON-4(1x1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsUncategorisedTPD2E001DZD
SOT-23-4-40℃~+85℃ 1.5pF 11V 1nA 2 5.5V ESD IEC 61000-4-2 Unidirectional SOT-23-4 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
README
README.mdBIOCHEST-ECG/EMG: Medical-Grade 4-Layer Wearable Biosignal Monitor
BIOCHEST-ECG/EMG is an ultra-compact, medical-grade, 4-layer wearable biosignal acquisition platform engineered for continuous, high-fidelity Electrocardiography (ECG) and Surface Electromyography (sEMG) telemetry. Designed strictly around IEC 60601-1 (2x MOPP) and IPC-2221 Class 2 medical standards, the device combines a 24-bit bio-potential analog front-end (AFE) with galvanic barrier isolation and an ESP32-S3 dual-core microcontroller featuring native Wi-Fi, BLE 5.0, and USB-C power-path management.
Figure 1: Full 4-Layer High-Density Medical PCBA with Galvanic Isolation Barrier & Routed Copper Tracks.
📑 Table of Contents
- Target Audience & Application Fields
- Operating Principle & Signal Chain Flow
- Electrode Placement & Clinical Lead Topology
- System Architecture & Technical Specifications
- Medical Safety & International Standards Compliance
- 4-Layer Stackup & Controlled Impedance
- Competitive Benchmark vs Commercial Solutions
- Interactive Web Viewer (KiCanvas & HTML BOM)
- Costed Bill of Materials (BOM)
- DFM / DFA Production Package
- Embedded Firmware & Smoke Test Benchmark
- Hardware Bring-Up & Validation
🎯 Target Audience & Application Fields
BIOCHEST-ECG/EMG is engineered to bridge the gap between expensive clinical medical equipment and low-cost consumer wearables, serving four primary sectors:
+--------------------------------------------------------------------------------------------------+
| TARGET DOMAINS & APPLICATIONS |
+--------------------------------+--------------------------------+--------------------------------+
| 🏥 TELEMEDICINE & CLINICAL RPM | 🏃 HIGH-PERFORMANCE SPORTS | 🔬 RESEARCH & TINYML AI |
+--------------------------------+--------------------------------+--------------------------------+
| - Ambulatory Holter monitoring | - Real-time HRV & stress score | - Edge AI arrhythmia detection |
| - Arrhythmia detection (AFib) | - Muscle fatigue & lactate EMG | - Gesture recognition (sEMG) |
| - Post-stroke neuromuscular rehab | - Kinematic muscle load balance| - Open-source research testbed |
+--------------------------------+--------------------------------+--------------------------------+1. Remote Patient Monitoring (RPM) & Telehealth
- Continuous 24-48h Holter Monitoring: Real-time detection of cardiac anomalies including Atrial Fibrillation (AFib), Premature Ventricular Contractions (PVCs), and Tachycardia.
- Physical Rehabilitation & Neurology: Surface electromyography (sEMG) assessment for stroke survivors, physical therapy progression tracking, and muscle atrophy rehabilitation.
2. Sports Science & Biomechanics
- Cardiovascular Strain Analysis: Continuous R-R interval extraction for Heart Rate Variability (HRV) analysis, autonomic nervous system balance, and recovery indexing.
- Neuromuscular Load & Muscle Fatigue: Quantifying root-mean-square (RMS) and median frequency (MDF) shifts in active muscle groups during athletic performance.
3. Biomedical Researchers & IoT Edge AI Developers
- Open Edge-Computing Hardware: Direct access to raw 24-bit uncompressed biosignal data via high-speed SPI/USB-C for training on-device TinyML machine learning models (TensorFlow Lite for Microcontrollers).
⚙️ Operating Principle & Signal Chain Flow
The system captures biopotentials in the microvolt ($\mu\text{V}$) range from the patient's skin, suppresses common-mode interference, isolates the signal across a 5kV barrier, and transmits digitized telemetry:
+---------------------------------------------------------------------------------------------------------+
| COMPLETE BIOSIGNAL SIGNAL PIPELINE |
+---------------------------------------------------------------------------------------------------------+
[ Patient Electrodes: ECG+, ECG-, EMG+, EMG-, RLD ]
│
▼
[ Stage 1: ESD & Defibrillation Clamping (TPD2E001 TVS Arrays, 0.9pF) ]
│
▼
[ Stage 2: Analog Front-End Conditioning (TI ADS1293) ]
├─ Differential Low-Noise Programmable Gain Amplifier (PGA)
├─ Active Common-Mode Cancellation via Right-Leg Drive (RLD) Amplifier (CMRR > 105 dB)
└─ 3x Simultaneous 24-Bit Delta-Sigma (ΔΣ) Analog-to-Digital Converters (100 SPS - 25.6 kSPS)
│
▼
[ Stage 3: Galvanic Barrier Isolation (TI ISO7741U + Mornsun B0503S-1WR3) ]
├─ 5000 Vrms Reinforced High-Speed Digital Capacitive Isolation
├─ 1.0mm Milled Physical Substrate Anti-Tracking Creepage Slot (> 8.0mm creepage)
└─ Independent 3.3V Ultra-Low-Noise Regulated Power Planes (AGND vs DGND)
│
▼
[ Stage 4: Digital Processing & Telemetry (Espressif ESP32-S3 Dual-Core 240MHz) ]
├─ Real-Time Digital Filtering (0.5 - 40Hz Bandpass for ECG, 20 - 450Hz for EMG, 50/60Hz Notch)
├─ QRS Complex & Pan-Tompkins Peak Detection (Instantaneous Heart Rate / HRV)📍 Electrode Placement & Clinical Lead Topology
The board integrates five 10mm medical male snap studs directly onto the PCBA, allowing standard disposable Ag/AgCl hydrogel electrodes or wearable chest straps to snap on directly:
+-----------------------------+
| PATIENT TORSO |
| |
| [ECG+] (J1) [ECG-] (J2)| <-- Lead I Configuration
| (Right) (Left) | (Across Upper Chest)
| |
| [RLD] (J3) | <-- Right Leg Drive Reference
| (Lower Sternum) | (Active Common-Mode Cancel)
| |
| [EMG+] (J4) [EMG-] (J5)| <-- Target Muscle Group
| (Proximal) (Distal) | (Biceps / Quadriceps / Pectoral)
| |
+-----------------------------+🔬 System Architecture & Technical Specifications
+-----------------------------------------------------------------------------------------------+
| BIOCHEST HARDWARE TOPOLOGY |
+------------------------------------+---------------------+------------------------------------+
| PATIENT ISOLATED DOMAIN | GALVANIC ISOLATION | DIGITAL & TELEMETRY DOMAIN |
+------------------------------------+---------------------+------------------------------------+
| [ECG+, ECG-] Snap Stud Electrodes | | |
| [EMG+, EMG-] Snap Stud Electrodes | 5kVrms Isolation | ESP32-S3-MINI-1 (Dual 240MHz) |
| [RLD] Right-Leg Drive Electrode | Barrier (8.0mm) | - Wi-Fi 802.11 b/g/n + BLE 5.0 |
| │ | | - 8MB Flash, USB-CDC Native |
| TPD2E001 Low-Cap ESD (0.9pF) | +-------------+ | │ |
| │ |───┤ ISO7741U ├───┤ SPI Bus (SCLK, MOSI, MISO, CS) |
| ADS1293 24-Bit 3-Ch Bio-AFE | | (Digital) | | │ |
| - Noise: 7uVpp (100Hz BW) | +-------------+ | MAX17048 Fuel Gauge (I2C) |
| - CMRR: 105 dB | Dynamic: 120 dB | | - ModelGauge Algorithm (SOC %) |
| │ | +-------------+ | │ |
| TPS7A2033 Ultra-Low-Noise LDO |───┤ B0503S-1WR3 ├───┤ BQ24075 Power-Path Charger |
| - 95dB PSRR @ 1kHz, 3.3V Pure | | (Power DC/DC│ | - Dynamic Power Management |
| - AGND Solid Inner Ground Plane | +-------------+ | - 800mAh LiPo via JST-PH / USB-C |
+------------------------------------+---------------------+------------------------------------+Comprehensive Technical Specifications:
| Parameter | Specification | Design Implementation |
|---|---|---|
| Form Factor | $64.0\text{ mm} imes 38.0\text{ mm} imes 1.6\text{ mm}$ | 4-Layer FR4 ENIG with 5mm rounded ergonomic corners |
| Channels | 3 Analog Biopotential Channels | 1x ECG Differential, 1x EMG Differential, 1x Active RLD |
| ADC Resolution | 24-Bit Sigma-Delta ($\Delta\Sigma$) | $1.2\text{ nV/LSB}$ dynamic resolution |
| Input Noise | $<7\mu\text{V}_\text{PP}$ ($0.05 - 100\text{ Hz}$) | Guarded differential traces over solid $AGND$ |
| CMRR | $>105\text{ dB}$ ($50/60\text{ Hz}$) | Active Right-Leg Drive feedback loop |
| Sampling Rate | $100\text{ SPS} - 25.6\text{ kSPS}$ | Programmable decimation filter |
| Galvanic Isolation | $5000\text{ V}_\text{RMS}$ (1 min) | Silicon capacitive isolation (ISO7741U) + Milled slot |
| Creepage / Clearance | $>8.0\text{ mm}$ Creepage / $>4.0\text{ mm}$ Clearance | Meets IEC 60601-1 (2x MOPP) requirements |
| Microcontroller | ESP32-S3 Dual-Core Xtensa LX7 @ 240MHz | 512KB SRAM + 8MB QSPI Flash |
| Wireless Telemetry | BLE 5.0 + Wi-Fi 802.11 b/g/n | Integrated PCB Antenna (impedance-matched) |
| Battery Autonomy | $>24\text{ hours}$ continuous acquisition | $800\text{ mAh}$ LiPo ($3.7\text{ V}$) via JST-PH header |
| Power Management | Dynamic Power-Path with fast charge | BQ24075 ($500\text{ mA}$ charge rate) + USB Type-C |
🛡️ Medical Safety & International Standards Compliance
1. IEC 60601-1 (Edition 3.2) & IEC 60601-2-47
- 2x MOPP (Means of Patient Protection): Reinforced dielectric barrier designed for a working voltage of $250\text{ V}\text{RMS}$ mains with $5000\text{ V}\text{RMS}$ withstand capability for 1 minute.
- Clearance: $\ge 4.0\text{ mm}$ line-of-sight distance across the isolation boundary.
- Creepage Distance: $\ge 8.0\text{ mm}$ achieved across the barrier through an integrated $1.0\text{ mm} imes 26.0\text{ mm}$ milled isolation slot in the PCB substrate (
Edge.Cuts), eliminating surface tracking (CTI Group IIIa material rating). - Patient Auxiliary Leakage Current: $<2\mu\text{A}$ under normal operating conditions ($<10\mu\text{A}$ Single Fault Condition).
- Defibrillation Protection Consideration: Input channels routed with low-capacitance TVS diode arrays (
TPD2E001, $C_\text{IO} = 0.9\text{ pF}$) protecting up to $\pm 15\text{ kV}$ Air / $\pm 8\text{ kV}$ Contact ESD (IEC 61000-4-2).
2. IPC-2221B (Generic Standard on Printed Board Design)
- Conductor Sizing: Power traces ($V_\text{BUS}, V_\text{SYS}, V_\text{BAT}$) calculated for maximum $1.5\text{ A}$ charging current with $\Delta T < 10^\circ\text{C}$ rise on $1\text{ oz}$ external copper ($35\mu\text{m}$ thickness): $$I = k \cdot \Delta T^{0.44} \cdot A^{0.725}$$ For external layers ($k=0.048$), minimum trace width is $0.45\text{ mm}$; routed with $0.60\text{ mm}$ ($33%$ design margin).
- Edge Pullback: $>1.0\text{ mm}$ copper-to-edge clearance across all 4 layers to prevent delamination during depaneling and routing.
3. IPC-7351B (Generic Requirements for Surface Mount Design)
- All footprint land patterns (WQFN-28, SOIC-16W, DFN-8, QFN-20, 0603 passives) comply with Density Level B (Nominal Producibility) ensuring optimal solder filleting, zero solder bridging, and reliable AOI/AXI inspection.
📐 4-Layer Stackup & Controlled Impedance
The board utilizes a standard industrial 4-layer symmetrical stackup (JLC04161H-7628 / PCBWay 4-Layer Standard):
================================================================================ Top Layer: F.Cu (35um) High-Speed & Differential Pairs
Dielectric Prepreg 7628 (Er = 4.4, H = 0.210mm)
-------------------------------------------------------------------------------- Inner Layer 1: In1.Cu (17.5um) Solid AGND / DGND Plane
FR-4 Core (Er = 4.5, H = 1.065mm)
-------------------------------------------------------------------------------- Inner Layer 2: In2.Cu (17.5um) Solid 3V3_AFE / 3V3_DIG Plane
Dielectric Prepreg 7628 (Er = 4.4, H = 0.210mm)
================================================================================ Bottom Layer: B.Cu (35um) Secondary Signals & GND FillControlled Impedance Calculations:
-
USB 2.0 High-Speed Differential Pair ($Z_\text{diff} = 90\Omega \pm 10%$):
- Trace Width ($W$): $0.25\text{ mm}$ ($9.84\text{ mils}$)
- Differential Spacing ($S$): $0.20\text{ mm}$ ($7.87\text{ mils}$)
- Dielectric Height ($H$): $0.21\text{ mm}$ ($8.27\text{ mils}$)
- Calculated Differential Impedance: $89.7\Omega$ (Verified with 2D Field Solver).
-
Analog Biosignal Traces ($ECG_P/N, EMG_P/N$):
- Trace Width: $0.25\text{ mm}$ ($9.84\text{ mils}$) guarded by coplanar $AGND$ return path on top and continuous solid reference plane on Layer 2.
🔬 Multi-Layer Routing Architecture & Copper Breakdown
|
Layer 1 (Top / F.Cu): Analog Biosignals, Differential Pairs & SMD Lands |
Layer 4 (Bottom / B.Cu): Digital Buses, Control Traces & GND Pour |
|
Layers 2 & 3 (In1.Cu / In2.Cu): Isolated AGND/DGND Solid Plane & Power Trunks |
Composite 4-Layer Routing: High-Density Interconnect (HDI) Full Stack |
📊 Competitive Benchmark vs Commercial Solutions
| Feature | Consumer Smartwatch (e.g. Apple/Galaxy) | Commercial Research Holter (e.g. Shimmer3) | BIOCHEST-ECG/EMG (This Project) |
|---|---|---|---|
| ADC Resolution | 12 - 16 Bit | 24 Bit | 24 Bit ($\Delta\Sigma$) |
| Simultaneous Channels | 1 Channel (Lead I only) | 1 - 2 Channels | 3 Channels (ECG + EMG + RLD) |
| Galvanic Isolation | None (Battery only) | Optional | 5 kVrms Reinforced (IEC 60601-1) |
| Open Raw Data Access | Closed Ecosystem | Proprietary API | 100% Open Access (SPI, BLE, USB) |
| Unit Manufacturing Cost | High ($>$200$) | Very High ($>$600$) | $15.39 USD (@ 1,000 units) |
| Edge AI / TinyML Ready | Closed OS | Limited | Native ESP32-S3 Dual 240MHz |
🌐 Interactive Web Viewer (KiCanvas & HTML BOM)
Inspect the full schematic and multilayer PCB directly in your browser without installing KiCad:
- 🔍 Interactive Web PCB Viewer (KiCanvas): Open BIOCHEST in KiCanvas
- 📋 Interactive Assembly BOM (iBOM): View Interactive HTML BOM
- 📄 Schematic PDF Document: BIOCHEST_Schematic.pdf
- 📄 PCB Layer Documentation: BIOCHEST_PCB_Layers.pdf
💰 Costed Bill of Materials (BOM)
| Item | Reference | Qty | Part Number / MPN | Manufacturer | Package | Supplier P/N | Prototype Link (AliExpress) | Unit Cost (USD) | Ext. Cost (1,000 pcs) |
|---|---|---|---|---|---|---|---|---|---|
| 1 | U1 | 1 | ADS1293CZXER | Texas Instruments | WQFN-28 (5x5mm) | DigiKey: 296-36528-1-ND | AliExpress Link | $8.45 | $5,950.00 |
| 2 | U2 | 1 | ISO7741UDWR | Texas Instruments | SOIC-16W (10.3x7.5mm) | Mouser: 595-ISO7741UDWR | AliExpress Link | $2.15 | $1,480.00 |
| 3 | U3 | 1 | ESP32-S3-MINI-1-N8 | Espressif Systems | SMD-43 (13.2x16.6mm) | Mouser: 356-ESP32S3MN1N8 | AliExpress Link | $2.80 | $2,100.00 |
| 4 | U7 | 1 | TPS7A2033PDBVR | Texas Instruments | SOT-23-5 | DigiKey: 296-TPS7A2033PDBVRCT-ND | AliExpress Link | $0.42 | $240.00 |
| 5 | U8 | 1 | AP2112K-3.3TRG1 | Diodes Incorporated | SOT-23-5 | LCSC: C52994 | AliExpress Link | $0.25 | $120.00 |
| 6 | U9 | 1 | BQ24075RGTR | Texas Instruments | QFN-20 (3.5x3.5mm) | DigiKey: 296-24150-1-ND | AliExpress Link | $1.65 | $1,150.00 |
| 7 | U10 | 1 | B0503S-1WR3 | Mornsun | SIP-4 (11.6x6.0mm) | LCSC: C72084 | AliExpress Link | $2.10 | $1,550.00 |
| 8 | U11 | 1 | MAX17048G+T10 | Analog Devices / Maxim | DFN-8 (2x2mm) | DigiKey: MAX17048G+T10CT-ND | AliExpress Link | $1.15 | $780.00 |
| 9 | D1-D3 | 3 | TPD2E001DRLR | Texas Instruments | SOT-553 | DigiKey: 296-21873-1-ND | AliExpress Link | $0.28 | $510.00 |
| 10 | C1-C4 | 4 | CL10B104KB8NNNC (100nF) | Samsung Electro-Mechanics | 0603 (1608 Metric) | LCSC: C14663 | AliExpress Link | $0.01 | $25.00 |
| 11 | C5, C7 | 2 | CL10A106KO8NNNC (10uF) | Samsung Electro-Mechanics | 0603 (1608 Metric) | LCSC: C19702 | AliExpress Link | $0.03 | $48.00 |
| 12 | C6 | 1 | CL10A475KO8NNNC (4.7uF) | Samsung Electro-Mechanics | 0603 (1608 Metric) | LCSC: C19666 | AliExpress Link | $0.02 | $18.00 |
| 13 | D4 | 1 | 19-217/GHC-YR1S2/3T (Green) | Everlight Electronics | 0603 (1608 Metric) | LCSC: C72043 | AliExpress Link | $0.04 | $22.00 |
| 14 | D5 | 1 | 19-217/R6C-AL1M2VY/3T (Red) | Everlight Electronics | 0603 (1608 Metric) | LCSC: C84267 | AliExpress Link | $0.03 | $16.00 |
| 15 | SW1, SW2 | 2 | KMR221GLFS | C&K Components | SMD-4 (2.8x4.2mm) | Mouser: 611-KMR221GLFS | AliExpress Link | $0.22 | $260.00 |
| 16 | J1-J5 | 5 | 10mm Snap Stud Stud | Keystone / Generic | 10mm Snap Pad | Keystone 5000 | AliExpress Link | $0.18 | $450.00 |
| 17 | J6 | 1 | TYPE-C-31-M-12 | Korean Hroparts / GCT | USB-C 16-Pin SMD | LCSC: C165948 | AliExpress Link | $0.32 | $190.00 |
| 18 | BT1 | 1 | S2B-PH-K-S(LF)(SN) | JST Sales America | JST-PH 2.0mm 2-Pin | DigiKey: 455-1719-ND | AliExpress Link | $0.12 | $75.00 |
| 19 | PCB | 1 | 4-Layer 1.6mm ENIG FR4 | PCBWay / JLCPCB | 64x38mm Board | PCBWay Order | PCBWay Prototype | $4.50 | $1,200.00 |
| TOTAL | 30 | $24.02 | $15,394.00 |
Cost per PCBA @ 1,000 Units: $15.39 USD (Turnkey Components + Fabrication)
📦 DFM / DFA Production Package
All fabrication and surface mount assembly files are generated and verified according to IPC standards:
- Gerber Files (
/gerber): RS-274X format with standard Gerber X2 layer identification extensions (.gtl,.gbl,.g1,.g2,.gts,.gbs,.gto,.gbo,.gm1). - NC Drill File: Excellon format (
BIOCHEST-ECG-EMG.drl) with metric unit coordinates. - Pick and Place / Centroid File (
/production/BIOCHEST_cpl.csv): SMT machine placement coordinates $(X, Y)$ and component rotation angles validated for SMT pick-and-place feeders.
Designator,Val,Package,Mid X,Mid Y,Rotation,Layer
"U1","ADS1293","WQFN-28_5x5mm",86.50,100.00,0,top
"U2","ISO7741U","SOIC-16W_DWW",98.50,100.00,0,top
"U3","ESP32-S3-MINI-1","ESP32-S3-MINI-1",118.00,100.00,0,top
"U7","TPS7A2033","SOT-23-5",90.50,86.00,0,top
"U8","AP2112K-3.3","SOT-23-5",112.00,114.50,0,top
"U9","BQ24075","QFN-20_3.5x3.5mm",120.50,114.50,0,top
"U10","B0503S-1WR3","SIP-4",98.50,115.50,0,top
"U11","MAX17048","DFN-8_2x2mm",107.50,113.00,0,top
"J6","USB_C","USB_C_Receptacle_16P",129.50,100.00,90,top💻 Embedded Firmware & Smoke Test Benchmark
The project includes an automated C++ hardware bring-up and smoke test suite in /firmware for PlatformIO / ESP-IDF.
Quick Build & Flash:
cd firmware
pio run --target upload
pio device monitor -b 115200Smoke Test Console Output:
===============================================================
BIOCHEST-ECG-EMG HARDWARE SMOKE TEST & BRING-UP BENCHMARK
===============================================================
MCU: ESP32-S3 Dual-Core @ 240 MHz | Flash: 8MB QSPI
Running automated peripheral integrity audit...
[TEST 1/4] Status & Alert LEDs ................. PASSED [OK]
[TEST 2/4] Isolated SPI Bus (ADS1293 AFE) ....... PASSED [OK] (Chip ID: 0x01)
[TEST 3/4] I2C Bus (MAX17048 Fuel Gauge) ....... PASSED [OK] (V_BAT: 3.98V | SOC: 86.4%)
+-------------------------------------------------------------+
| DIAGNOSTIC SUMMARY REPORT |
+--------------------------+-----------------+----------------+
| Subsystem | Status | Detail |
+--------------------------+-----------------+----------------+
| 3.3V Digital Domain | ONLINE | VDD: 3.30V |
| 3.3V Isolated AFE Domain | ONLINE | VDD1: 3.30V |
| ADS1293 Bio-AFE (SPI) | OPERATIONAL | ID: 0x01 |
| MAX17048 Fuel Gauge(I2C) | OPERATIONAL | 3.98V (86%) |
| Power-Path BQ24075 | ACTIVE | Auto-Select |
+--------------------------+-----------------+----------------+
>>> ALL SYSTEMS NOMINAL: Ready for High-Resolution Biosignal Acquisition.🔬 Hardware Bring-Up & Validation
- Design Rule Checks (DRC): 100% passed via KiCad 10.0 CLI with 0 unconnected nets and 0 short circuits.
- Corner Routing Geometry: Audited and verified with 0 right-angle (90°) turns across all copper layers.
- Creepage & Clearance Verification: Verified $>8.0\text{ mm}$ creepage across milled slot.
- Signal Integrity: Differential pair skew on USB lines $<5\text{ ps}$, return current loops continuous with zero plane splits beneath high-speed signals.
👤 Author & Engineering Contact
Christian Ochoa
Biomedical & Hardware Design Engineer
- 💼 GitHub: @8aChristian
- 📁 Repository: BIOCHEST-ECG-EMG
Developed with KiCad 10.0 EDA. Hardware design files released under the MIT Open Source Hardware License.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | TPD2E001 | TPD2E001_SOT-23 | D1, D2, D3 |
| 1 | 100nF_AVDD | C_0603_1608Metric | C1 |
| 1 | 100nF_DVDD | C_0603_1608Metric | C2 |
| 1 | 100nF_ISO2 | C_0603_1608Metric | C4 |
| 1 | 100nF_VDD | C_0603_1608Metric | C3 |
| 1 | 10uF_3V3 | C_0603_1608Metric | C5 |
| 1 | 10uF_VBAT | C_0603_1608Metric | C7 |
| 1 | 4.7uF_3V3 | C_0603_1608Metric | C6 |
| 1 | ADS1293 | ADS1293_WQFN-28_5x5mm | U1 |
| 1 | ALERT_RED | LED_0603_1608Metric | D5 |
| 1 | AP2112K-3.3 | SOT-23-5 | U8 |
| 1 | B0503S-1WR3 | B0503S_1WR3_SIP-4 | U10 |
| 1 | BOOT | SW_Push_SPST_NO_3x4mm | SW2 |
| 1 | BQ24075 | BQ24075_QFN-20_3.5x3.5mm | U9 |
| 1 | ECG+ | Snap_Button_Male_10mm | J1 |
| 1 | ECG- | Snap_Button_Male_10mm | J2 |
| 1 | EMG+ | Snap_Button_Male_10mm | J4 |
| 1 | EMG- | Snap_Button_Male_10mm | J5 |
| 1 | ESP32-S3-MINI-1 | ESP32-S3-MINI-1 | U3 |
| 1 | ISO7741U | ISO7741U_SOIC-16W_DWW | U2 |
| 1 | MAX17048 | MAX17048_DFN-8_2x2mm | U11 |
| 1 | RESET | SW_Push_SPST_NO_3x4mm | SW1 |
| 1 | RLD | Snap_Button_Male_10mm | J3 |
| 1 | STATUS_GRN | LED_0603_1608Metric | D4 |
| 1 | TPS7A2033 | SOT-23-5 | U7 |
| 1 | USB_C | USB_C_Receptacle_16P_SurfaceMount | J6 |
| 1 | VBAT_JST | JST_PH_S2B-PH-K-S_1x02_P2.00mm_Horizontal | BT1 |
Similar boards
- 2 layers100 × 90 mm

- 4 layers57 × 27 mm

Altlog
alexdortiz/flight-data-recorder
4-layer flight data recorder. Open altlog.kicadpro in KiCad 10.
47 partsMIT - 2 layers90 × 130 mm

Multimeter
PreferLinux/open-source-multimeter
Source repository for https://hackaday.io/project/10820-open-source-multimeter
194 parts14GPL-3.0 - 4 layers62 × 105 mm

PT100 Datalogger
rasusmilch/PT100_Mesh_Datalogger
This application turns an ESP32-S3 N8R2 into a UTC-centric PT100 data logger with FRAM-first buffering, SD-card CSV batching/verification, DS3231 RTC support, mesh streaming, and serial-console calibration.
139 parts - 2 layers103.4 × 73 mm

Power supply
vt-amplab/basic-soldering-cert-board
Kicad files for the new basic soldering certification board
104 partsApache-2.0 - 2 layers89 × 49.9 mm

- 2 layers100 × 80 mm

Phase3-manager
udaravima/Lab_Bench
A modular, rack-style DC power supply: up to 8 hot-pluggable 600 W buck modules on a shared DC input bus, coordinated by a central manager over CAN.
87 parts1GPL-3.0 - 2 layers54 × 15 mm

Questions
How big is the BIOCHEST ECG EMG PCB?
It measures 88 × 58 mm and has 4 copper layers, 1.6 mm thick.
What parts does the BIOCHEST ECG EMG use?
29 parts, built around the B0503S-1WR3, ESP32-S3-MINI-1-N8, AP2112K-3.3 and BQ24075RGT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BIOCHEST ECG EMG KiCad files?
From the 8aChristian/BIOCHEST-ECG-EMG repository on GitHub, at the commit this page was made from: the board is BIOCHEST-ECG-EMG.kicad_pcb and its schematic AFE_ADS1293.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BIOCHEST ECG EMG design in my own project?
Its repository states no licence, so its author keeps all rights: ask 8aChristian before reusing the design.