
DMP4015SPS
Diodes IncorporatedExtended
-55℃~+150℃ 1 P-Channel 1.036nF 15mΩ@4.5V 17A 2.1W 2.5V 4.234nF 40V 47.5nC@5V 526pF P-Channel TDSON-8-EP(5x6) MOSFETs ROHS
- Part id
- diodes/DMP4015SPS
- Category
- MOSFETs
- Package
- TDSON-8-EP(5x6)
- Pins
- 13
- In stock
- 161 at JLCPCB (C155290)
- Used on
- 1 open-source board
Overview
The DMP4015SPS is a MOSFET made by Diodes Incorporated in a TDSON-8-EP(5x6) package with 13 pins. -55℃~+150℃ 1 P-Channel 1.036nF 15mΩ@4.5V 17A 2.1W 2.5V 4.234nF 40V 47.5nC@5V 526pF P-Channel TDSON-8-EP(5x6) MOSFETs ROHS.
PCBKit's library has its footprint (EasyEDA_Cloud:DFN-8_L6.0-W5.1-P1.27-LS6.2-BL, from EasyEDA), ready for a KiCad board. 161 are in stock at JLCPCB (part C155290). 1 open-source board in 1 repository on GitHub use it.
Symbol
The library has no symbol for this part yet.
Footprint
From the datasheet
14- Drain-source, most
- 40 V · VDSS, absolute maximum · p. 2
- Gate-source, most
- 25 V · VGSS, absolute maximum magnitude, ±25 V · p. 2
- Drain current, most
- 8.5 A · ID, continuous maximum at TA = +25°C, VGS = -10V, minimum pad layout · p. 2
- Drain current, most
- 11 A · ID, continuous maximum at TA = +25°C, VGS = -10V, Note 6 board · p. 2
- Junction, hottest
- 150 °C · TJ, maximum operating junction temperature · p. 2
- Junction to air (PowerDI5060-8)
- 96.4 K/W · RθJA, steady state, Note 5 minimum pad layout · p. 2
- Junction to air (PowerDI5060-8)
- 40.6 K/W · RθJA, t<10s, Note 5 minimum pad layout · p. 2
- Junction to air (PowerDI5060-8)
- 49 K/W · RθJA, steady state, Note 6 board · p. 2
- Junction to air (PowerDI5060-8)
- 24 K/W · RθJA, t<10s, Note 6 board · p. 2
- On resistance
- 11 mΩ · RDS(ON), max, VGS = -10V, ID = -9.8A · p. 3
- On resistance
- 15 mΩ · RDS(ON), max, VGS = -4.5V, ID = -9.8A · p. 3
- Gate threshold
- 2 V · VGS(th), typical, VDS = VGS, ID = -250uA · p. 3
- Forward voltage
- 700 mV · VSD, typical body diode, VGS = 0V, IS = -1A · p. 3
- Edge
- 10 ns · tr, typical, VGS = -10V, VDD = -20V, RG = 6Ω, ID = -1A, RL = 20Ω · p. 3
What it is and has
6- MOSFET type
- 40V P-channel enhancement mode · p. 1
- Production testing
- 100% unclamped inductive switch (UIS) test · p. 1
- Package
- PowerDI®5060-8 · p. 1
- Moisture sensitivity
- Level 1 per J-STD-020 · p. 1
- Environmental compliance
- Lead-free finish; RoHS compliant · p. 1
- Material
- Halogen and antimony free · p. 1
Specifications
43| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Drain-Source Voltage VDSS | TA = +25°C | max -40 V | 2 |
| Gate-Source Voltage VGSS | TA = +25°C | min -25 · max 25 V | 2 |
| Continuous Drain Current (Note 5) VGS = -10V ID | Steady State, TA = +25°C; FR-4 PC board, minimum recommended pad layout, single sided | max -8.5 A | 2 |
| Continuous Drain Current (Note 5) VGS = -10V ID | Steady State, TA = +70°C; FR-4 PC board, minimum recommended pad layout, single sided | max -6.8 A | 2 |
| Continuous Drain Current (Note 5) VGS = -10V ID | t<10s, TA = +25°C; FR-4 PC board, minimum recommended pad layout, single sided | max -13 A | 2 |
| Continuous Drain Current (Note 5) VGS = -10V ID | t<10s, TA = +70°C; FR-4 PC board, minimum recommended pad layout, single sided | max -10.5 A | 2 |
| Continuous Drain Current (Note 6) VGS = -10V ID | Steady State, TA = +25°C; FR-4 substrate PC board, 2oz copper, thermal bias to bottom layer 1inch square copper plate | max -11 A | 2 |
| Continuous Drain Current (Note 6) VGS = -10V ID | Steady State, TA = +70°C; FR-4 substrate PC board, 2oz copper, thermal bias to bottom layer 1inch square copper plate | max -8.7 A | 2 |
| Continuous Drain Current (Note 6) VGS = -10V ID | t<10s, TA = +25°C; FR-4 substrate PC board, 2oz copper, thermal bias to bottom layer 1inch square copper plate | max -17 A | 2 |
| Continuous Drain Current (Note 6) VGS = -10V ID | t<10s, TA = +70°C; FR-4 substrate PC board, 2oz copper, thermal bias to bottom layer 1inch square copper plate | max -13.5 A | 2 |
| Pulsed Drain Current (10us Pulse, Duty Cycle = 1%) IDM | TA = +25°C; 10us Pulse, Duty Cycle = 1% | max -100 A | 2 |
| Maximum Body Diode Continuous Current (Note 6) IS | TA = +25°C; FR-4 substrate PC board, 2oz copper, thermal bias to bottom layer 1inch square copper plate | max -11 A | 2 |
| Avalanche Current L = 1mH IAS | TA = +25°C; L = 1mH | max -22 A | 2 |
| Avalanche Energy L = 1mH EAS | TA = +25°C; L = 1mH | max 242 mJ | 2 |
| Total Power Dissipation (Note 5) PD | TA = +25°C; FR-4 PC board, minimum recommended pad layout, single sided | max 1.3 W | 2 |
| Total Power Dissipation (Note 5) PD | TA = +70°C; FR-4 PC board, minimum recommended pad layout, single sided | max 0.8 W | 2 |
| Thermal Resistance, Junction to Ambient (Note 5) RθJA | Steady state; FR-4 PC board, minimum recommended pad layout, single sided | max 96.4 °C/W | 2 |
| Thermal Resistance, Junction to Ambient (Note 5) RθJA | t<10s; FR-4 PC board, minimum recommended pad layout, single sided | max 40.6 °C/W | 2 |
| Total Power Dissipation (Note 6) PD | TA = +25°C; FR-4 substrate PC board, 2oz copper, thermal bias to bottom layer 1inch square copper plate | max 2.1 W | 2 |
| Total Power Dissipation (Note 6) PD | TA = +70°C; FR-4 substrate PC board, 2oz copper, thermal bias to bottom layer 1inch square copper plate | max 1.4 W | 2 |
| Thermal Resistance, Junction to Ambient (Note 6) RθJA | Steady state; FR-4 substrate PC board, 2oz copper, thermal bias to bottom layer 1inch square copper plate | max 49 °C/W | 2 |
| Thermal Resistance, Junction to Ambient (Note 6) RθJA | t<10s; FR-4 substrate PC board, 2oz copper, thermal bias to bottom layer 1inch square copper plate | max 24 °C/W | 2 |
| Thermal Resistance, Junction to Case (Note 7) RθJC | Junction to soldering point on the exposed drain pad | max 1.6 °C/W | 2 |
| Operating and Storage Temperature Range TJ, TSTG | min -55 · max 150 °C | 2 | |
| Drain-Source Breakdown Voltage BVDSS | TA = +25°C; VGS = 0V, ID = -250uA; Note 8 | min -40 V | 3 |
| Zero Gate Voltage Drain Current IDSS | TA = +25°C; VDS = -40V, VGS = 0V; Note 8 | max -1 uA | 3 |
| Gate-Source Leakage IGSS | TA = +25°C; VGS = ±25V, VDS = 0V; Note 8 | max 100 nA | 3 |
| Gate Threshold Voltage VGS(th) | TA = +25°C; VDS = VGS, ID = -250uA; Note 8 | min -1.5 · typ -2 · max -2.5 V | 3 |
| Static Drain-Source On-Resistance RDS(ON) | TA = +25°C; VGS = -10V, ID = -9.8A; Note 8 | typ 7 · max 11 mΩ | 3 |
| Static Drain-Source On-Resistance RDS(ON) | TA = +25°C; VGS = -4.5V, ID = -9.8A; Note 8 | typ 9 · max 15 mΩ | 3 |
| Forward Transfer Admittance |Yfs| | TA = +25°C; VDS = -20V, ID = -9.8A; Note 8 | typ 26 S | 3 |
| Diode Forward Voltage VSD | TA = +25°C; VGS = 0V, IS = -1A; Note 8 | typ -0.7 · max -1 V | 3 |
| Input Capacitance Ciss | TA = +25°C; VDS = -20V, VGS = 0V, f = 1MHz; Note 9 | typ 4234 pF | 3 |
| Output Capacitance Coss | TA = +25°C; VDS = -20V, VGS = 0V, f = 1MHz; Note 9 | typ 1036 pF | 3 |
| Reverse Transfer Capacitance Crss | TA = +25°C; VDS = -20V, VGS = 0V, f = 1MHz; Note 9 | typ 526 pF | 3 |
| Gate Resistance RG | TA = +25°C; VDS = 0V, VGS = 0V, f = 1MHz; Note 9 | typ 7.77 Ω | 3 |
| Total Gate Charge Qg | TA = +25°C; VDS = -20V, VGS = -5V, ID = -9.8A; Note 9 | typ 47.5 nC | 3 |
| Gate-Source Charge Qgs | TA = +25°C; VDS = -20V, VGS = -5V, ID = -9.8A; Note 9 | typ 14.2 nC | 3 |
| Gate-Drain Charge Qgd | TA = +25°C; VDS = -20V, VGS = -5V, ID = -9.8A; Note 9 | typ 13.5 nC | 3 |
| Turn-On Delay Time tD(on) | TA = +25°C; VGS = -10V, VDD = -20V, RG = 6Ω, ID = -1A, RL = 20Ω; Note 9 | typ 13.2 ns | 3 |
| Turn-On Rise Time tr | TA = +25°C; VGS = -10V, VDD = -20V, RG = 6Ω, ID = -1A, RL = 20Ω; Note 9 | typ 10 ns | 3 |
| Turn-Off Delay Time tD(off) | TA = +25°C; VGS = -10V, VDD = -20V, RG = 6Ω, ID = -1A, RL = 20Ω; Note 9 | typ 302.7 ns | 3 |
| Turn-Off Fall Time tf | TA = +25°C; VGS = -10V, VDD = -20V, RG = 6Ω, ID = -1A, RL = 20Ω; Note 9 | typ 137.9 ns | 3 |
Ordering codes, by the datasheet
1- DMP4015SPS-13
- PowerDI5060-8 · 2,500 per reel · p. 2
Open-source boards using it
1- 2 layers81 × 85 mm

Parts like it
3DMT6005LPS
DFN-8(5.1x6)-55℃~+150℃ 1 N-channel 125A 125W 2.962nF 23.1nC@4.5V、47.1nC@10V 3.5mΩ@10V、5mΩ@4.5V 3V 59.8pF 60V 965.2pF DFN-8(5.1x6) MOSFETs ROHSDiodes IncorporatedMOSFETsNCEP01T10G
DFN-8(5.1x6)DFN-8(5.1x6) MOSFETs ROHSWuxi NCE Power SemiconductorMOSFETsDMT10H015LPS
PowerDI5060-8-55℃~+150℃ 1 N-channel 1.871nF 100V 16mΩ@10V 33.3nC@10V 3V 44A 46W 6.9pF PowerDI5060-8 MOSFETs ROHSDiodes IncorporatedMOSFETs
Questions
Is there a KiCad symbol and footprint for the DMP4015SPS?
Yes. the footprint EasyEDA_Cloud:DFN-8_L6.0-W5.1-P1.27-LS6.2-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the DMP4015SPS?
TDSON-8-EP(5x6), with 13 pins. Its footprint is drawn on this page.
Where is the DMP4015SPS datasheet?
Diodes Incorporated publishes it: the Datasheet link on this page opens it.
Where can I order the DMP4015SPS?
JLCPCB lists it as part C155290, with 161 in stock; the sellers' links on this page open their listings.
What can replace the DMP4015SPS?
Parts like it in the library: the DMT6005LPS by Diodes Incorporated, the NCEP01T10G by Wuxi NCE Power Semiconductor and the DMT10H015LPS by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the DMP4015SPS?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.