2 layers68 × 110 mm
2 layers68 × 110 mm
Multimeter
schuyler4/Multimeter3My multimeter design.
- Size
- 68 × 110 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 133
- Nets
- 135
- Pads
- 441
- Tracks, vias
- 1,152, 154
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Feb 2024
- Updated
- 8 May 2026
Overview
Multimeter is an open-source printed circuit board by schuyler4, from the schuyler4/Multimeter repository on GitHub, published under the MIT licence. It is a 2-layer board of 68 × 110 mm with 133 parts on 135 nets, routed with 1,152 tracks and 154 vias.
It is built around the SC0915, MCP3561-E/NC and CC56-12SURKWA, with the LMV761MF, OPA4388IDR-TP and TS3A4751PWR among its other parts. Its parts include 68 resistors, 25 transistors, 10 capacitors, 8 ICs and 7 diodes. It belongs with the sensors and measurement boards of this library.
Main components
11
SC0915
Raspberry Pi Pico SMD module (including test points).Raspberry PiUncategorised
MCP3561-E/NC
QFN-20-EP(3x3)-40℃~+125℃ 1 107.2dB 153.6kHz 153.6kHz 1MHz~20MHz、3.3MHz~6.6MHz 2.7V~3.6V 24 500ppb/℃ Built-in External External、Built-in SPI Sigma-Delta Support Yes QFN-20-EP(3x3) Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)
CC56-12SURKWA
DIP-12-40℃~+85℃ 0.56 1.85V 4 7 Segment 72mcd 75mW Common Cathode Red DIP-12 LED Segment Displays ROHSKingbrightLED Segment Displays
LMV761MF
SOT-23-6-40℃~+125℃ 0.001pA 0.2pA 1 100dB 120ns 2.7V~5.25V 200uV 300uA 5.5V Enable/shutdown function Push-pull TTL、CMOS SOT-23-6 Comparators ROHSTexas InstrumentsComparators
OPA4388IDR-TP
SOP-14SOP-14 Precision Op Amps ROHSTECH PUBLICPrecision Op Amps
TS3A4751PWR
TSSOP-14-40℃~+85℃ 1.6V~3.6V 125MHz 1:1 43pF 4ns 5ns 900mΩ TSSOP-14 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
BSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
LTST-C170KRKT
0805-55℃~+85℃ 130° 20mA 2V 54mcd 631nm 639nm 75mW Discrete Diode Red Water Clear 0805 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
B340
SMC(DO-214AB)-55℃~+150℃ 1 Independent 100A 3A 40V 500mV@3A 500uA@40V SMC(DO-214AB) Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesGF-161-0005
插件12.57mm 125V 14.4mm 16.36mm 3.61mm 3PDT PC Pin Rectangular Columnar Through Hole Plugin Slide Switches ROHSCW INDUSTRIESSlide Switches
SMF6.0A
SOD-123FLESD And Surge Protection (TVS/ESD)hongjiacheng
README
readme.mdMultimeter
This is my homebrew multimeter. It differs from standard multimeters in several respects.
- Only the most used modes are actually included: VDC, Ohms, Capacitance
- Powered by a USB cable, no changing batteries.
- Generally a different user interface because of 1 and 2.
Calibration
Calibration is relative to my Fluke 101 Multimeter. I know that there is probably some technical problems with this, as the Fluke 101 does not have more digits than this meter, nor is it substantially more accurate in voltage mode. However, I don't have a really nice bench top meter, so it will have to do.
Specs
- Input Resistance: 521kΩ
- Range
- Voltage: +/-60V
- Resistance Range 1: 30Ω - 1.2kΩ
- Resistance Range 2: 1.2kΩ - 500kΩ
- Capacitance: 50nF - 47uF
-
Relative Accuracy
- Voltage: 0.5%
- Resistance: 10%
- Capacitance: 5%
Parts
133| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 1k | Resistor_SMD:R_0805_2012Metric | R10, R11, R12, R32, R34, R35, R45, R46, R47, R48, R49, R50, R51, R52, R54, R55 +3 |
| 16 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6, R23, R24, R25, R26, R27, R42, R43, R44, R59, R62, R63, R69 |
| 16 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q12, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23, Q24, Q25 |
| 11 | 649 | Resistor_SMD:R_0805_2012Metric | R13, R14, R15, R16, R17, R18, R19, R20, R28, R30, R31 |
| 9 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q13, Q14 |
| 8 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C13, C17 |
| 7 | 10k+/-0.1% | Resistor_SMD:R_0805_2012Metric | R7, R21, R36, R38, R40, R41, R53 |
| 5 | Pad | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 100k+/-0.1% | Resistor_SMD:R_0805_2012Metric | R2, R39, R60, R68 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 1k+/-0.1% | Resistor_SMD:R_0805_2012Metric | R1, R64, R65 |
| 3 | LTST-C170KRKT | LED_SMD:LED_0805_2012Metric | D1, D3, D4 |
| 2 | 50k+/-0.1% | Resistor_SMD:R_0805_2012Metric | R61, R66 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric | R29 |
| 1 | 1.62k | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric | C15 |
| 1 | 499+/-0.1% | Resistor_SMD:R_0805_2012Metric | R56 |
| 1 | 5.11M+/-1% | Resistor_SMD:R_0805_2012Metric | R37 |
| 1 | 500k+/-0.1% | Resistor_SMD:R_0805_2012Metric | R22 |
| 1 | 500mA | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | 5k+/-0.1% | Resistor_SMD:R_0805_2012Metric | R33 |
| 1 | B1HSW6 | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J1 |
| 1 | B340 | Diode_SMD:D_SMB | D2 |
| 1 | BAT46W-7-F | Diode_SMD:D_SOD-123 | D7 |
| 1 | Black Banana Plug | Multimeter:KEYSTONE_575-4 | J4 |
| 1 | CC56-12SURKWA | Display_7Segment:CA56-12SURKWA | U4 |
| 1 | DDZ9684-7 | Diode_SMD:D_SOD-123 | D5 |
| 1 | GF-161-0005 | Multimeter:GF-161-0005 | SW3 |
| 1 | INA326 | Package_SO:MSOP-8_3x3mm_P0.65mm | U9 |
| 1 | LM4030-2.5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | LMV761MF | Package_TO_SOT_SMD:SOT-23-6 | U8 |
| 1 | MCP3561 | Package_SO:SSOP-20_4.4x6.5mm_P0.65mm | U10 |
| 1 | OPA4388IDR | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | Red Banana Plug | Multimeter:KEYSTONE_575-4 | J3 |
| 1 | SC0915 | Multimeter:MODULE_SC0915 | U1 |
| 1 | SMF6.0A | Diode_SMD:D_SOD-123F | D6 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | TS3A4751PWR | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U5 |
Questions
How big is the Multimeter PCB?
It measures 68 × 110 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Multimeter use?
133 parts, built around the SC0915, MCP3561-E/NC, CC56-12SURKWA and LMV761MF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Multimeter KiCad files?
From the schuyler4/Multimeter repository on GitHub, at the commit this page was made from: the board is electronics/rev4/ecad/Multimeter.kicad_pcb and its schematic electronics/rev1/ecad/Multimeter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Multimeter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from schuyler4/Multimeter
2- 2 layers68 × 110 mm
Similar boards
- 4 layers100 × 100 mm
- 4 layers98.7 × 44.7 mm
NanoLogger
TobiasNetzer/nanoLogger
Here is a simplified block diagram of the data logger. To measure the current of a device, the data logger is simply connected in series between the voltage source and the DUT/load.
221 parts - 2 layers81.3 × 66 mm
- 4 layers161 × 100 mm
AD DA module
KLFAMO/relock_Artiq
This project is an electronic device based on the STM32 microcontroller, equipped with an Ethernet port for remote control and data communication.
416 parts - 2 layers20 × 20 mm
Chlorophyll sensor v2
UoM-Robotics-Society/ROV-project
Software, mechanical design and hardware for ROV
22 parts14 - 4 layers160 × 62 mm
- 4 layers25.4 × 25.6 mm
- 4 layers73.9 × 43 mm
