4 layers55 × 42 mm
4 layers160 × 62 mm
Gp4-hil
azonenberg/openfpga259Open FPGA tools
- Size
- 160 × 62 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 450
- Nets
- 365
- Pads
- 1,825
- Tracks, vias
- 6,949, 1,110
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 11 Feb 2016
- Updated
- 30 Mar 2020
Overview
Gp4-hil is an open-source printed circuit board by azonenberg, from the azonenberg/openfpga repository on GitHub. It is a 4-layer board of 160 × 62 mm with 450 parts on 365 nets, routed with 6,949 tracks and 1,110 vias.
It is built around the SIP32408EVB, KSZ9031RNXCA and INA199A2RSW, with the TS3A4751PWR, TXB0104RUTR and ADG726BCP among its other parts. Its parts include 181 capacitors, 138 resistors, 35 ICs, 21 diodes and 13 transistors. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
9SIP32408EVB
-ModulesVishay Intertechnology
KSZ9031RNXCA
QFN-48-EP(7x7)0℃~+70℃ 1.2V、1.8V、2.5V、3.3V 10BASE-T、100BASE-TX、1000BASE-T 10Mbit/s、100Mbit/s、1Gbit/s 4 PHY Transceiver RGMII QFN-48-EP(7x7) Ethernet Transceivers ROHSMicrochip TechnologyEthernet Transceivers
INA199A2RSW
UQFN-10(1.4x1.8)-300mV~26V -40℃~+125℃ 0.4V/us 0.5uV/℃ 1 120dB 2.7V~26V 200V/V 25nV/√Hz 28uA 5uV 65uA 80kHz ±26V UQFN-10(1.4x1.8) Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense Amplifiers
TS3A4751PWR
TSSOP-14-40℃~+85℃ 1.6V~3.6V 125MHz 1:1 43pF 4ns 5ns 900mΩ TSSOP-14 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
TXB0104RUTR
UQFN-12(1.7x2)-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 4 Auto Direction Detection Bidirectional Tri-State UQFN-12(1.7x2) Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
ADG726BCP
LFCSP-48(7x7)-2.5V~2.5V、1.8V~5.5V -40℃~+85℃ 16:1 175pF 17ns 18ns 34MHz 34ns 4Ω 5pC Bidirectional analog channel、Glitch-free switching、Fail-safe disconnect LFCSP-48(7x7) Analog Switches, Multiplexers ROHSAnalog DevicesAnalog Switches, Multiplexers
SSM6N58NU,LF
UDFN-6(2x2)-50℃~+150℃ 1.8nC@4.5V 129pF 13pF 180mΩ@1.8V 1V 1W 2 N-Channel 30V 34pF 4A N-Channel ±12V UDFN-6(2x2) MOSFETs ROHSToshibaMOSFETsCDBQR0130L
SOD-923F-40℃~+125℃ 1 Independent 100mA 10uA@10V 1A 30V 350mV@10mA SOD-923F Schottky Diodes ROHSComchipSchottky Diodes
DMP2069UFY4
X1-DFN1212-3-55℃~+150℃ 1 P-Channel 2.5A 20V 214pF 25pF 530mW 54mΩ@4.5V 9.1nC X1-DFN1212-3 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdopenfpga
Open-source FPGA/CPLD toolchain project for multiple device families.
The most mature target is Silego GreenPAK4. Active work is underway for Xilinx CoolRunner-II and Cypress PSoC5LP.
Questions? Comments? Having trouble getting it to work? Join our IRC, ##openfpga on Freenode.
Parts
450| Qty | Value | Footprint | References |
|---|---|---|---|
| 91 | 0.47 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113 +75 |
| 46 | 4.7 uF | azonenberg_pcb:EIA_0603_CAP_NOSILK | C12, C13, C15, C18, C131, C132, C133, C137, C138, C139, C143, C169, C170, C171, C173, C179 +30 |
| 43 | 33 | azonenberg_pcb:EIA_0402_RES_NOSILK | R10, R11, R12, R13, R14, R121, R122, R123, R124, R125, R126, R127, R128, R129, R133, R134 +27 |
| 33 | TESTPOINT | azonenberg_pcb:TESTPOINT_SMT_KEYSTONE_5016 | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP24, TP25 +17 |
| 20 | 220 | azonenberg_pcb:EIA_0402_RES_NOSILK | R151, R152, R153, R154, R155, R156, R157, R158, R159, R160, R161, R162, R163, R164, R165, R166 +4 |
| 19 | GREEN | azonenberg_pcb:EIA_0603_LED | D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36 +3 |
| 17 | 1K | azonenberg_pcb:EIA_0402_RES_NOSILK | R2, R15, R16, R100, R114, R119, R120, R169, R176, R181, R182, R183, R184, R185, R186, R188 +1 |
| 15 | 0.1 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C1, C7, C17, C20, C145, C146, C149, C150, C151, C152, C153, C154, C176, C177, C178 |
| 12 | 22 uF | azonenberg_pcb:EIA_1206_CAP_NOSILK | C116, C117, C118, C119, C120, C121, C123, C124, C125, C126, C127, C128 |
| 11 | 10K 0.1% | azonenberg_pcb:EIA_0402_RES_NOSILK | R22, R23, R24, R38, R41, R144, R145, R146, R147, R148, R149 |
| 11 | SSM6N58NU | azonenberg_pcb:DFN_6_0.65MM_2x2MM_GDS | Q1, Q11, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21 |
| 10 | 47 uF | azonenberg_pcb:EIA_1206_CAP_NOSILK | C31, C33, C54, C56, C65, C87, C88, C89, C90, C91 |
| 8 | 0 | azonenberg_pcb:EIA_0402_RES_NOSILK | R103, R115, R116, R117, R118, R135, R136, R137 |
| 8 | 10K | azonenberg_pcb:EIA_0402_RES_NOSILK | R1, R170, R171, R172, R173, R174, R175, R187 |
| 8 | TS3A4751 | azonenberg_pcb:QFN_14_0.4MM_2x2MM_TI_RUC | U15, U16, U17, U18, U19, U25, U26, U27 |
| 7 | SIP32408 | azonenberg_pcb:DFN_4_0.5MM_1.6x1.2MM | U4, U20, U21, U22, U23, U24, U32 |
| 6 | 600R | azonenberg_pcb:EIA_0603_INDUCTOR_NOSILK | L1, L2, L4, L5, L8, L13 |
| 6 | JUMPER | azonenberg_pcb:JUMPER_2.54MM_2POS | JP1, JP2, JP3, JP4, JP5, JP6 |
| 4 | 2.2 uH 3.7A | azonenberg_pcb:INDUCTOR_YUDEN_NR6028 | L7, L9, L10, L11 |
| 4 | 30K 0.1% | azonenberg_pcb:EIA_0402_RES_NOSILK | R17, R19, R20, R21 |
| 4 | DAC084S085 | azonenberg_pcb:DFN_10_0.5MM_3x3MM | U11, U12, U13, U14 |
| 3 | 4.7K | azonenberg_pcb:EIA_0402_RES_NOSILK | R130, R131, R132 |
| 3 | INA199A2RSW | azonenberg_pcb:QFN_10_0.4MM_1.8x1.5MM | U34, U35, U36 |
| 3 | TESTPOINT | azonenberg_pcb:TESTPOINT_SMT_0.5MM | TP22, TP23, TP33 |
| 2 | 1 | azonenberg_pcb:EIA_0402_RES_NOSILK | R178, R180 |
| 2 | 1 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C147, C148 |
| 2 | 1.02M | azonenberg_pcb:EIA_0402_RES_NOSILK | R108, R110 |
| 2 | 100 | azonenberg_pcb:EIA_0402_RES_NOSILK | R140, R141 |
| 2 | 100 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C64, C122 |
| 2 | 10K 1% | azonenberg_pcb:EIA_0402_RES_NOSILK | R138, R139 |
| 2 | 40.2K 0.1% | azonenberg_pcb:EIA_0402_RES_NOSILK | R142, R143 |
| 2 | AD9609 | azonenberg_pcb:QFN_32_0.5MM_5x5MM | U9, U10 |
| 2 | CDBQR0130L | azonenberg_pcb:EIA_0402_LED | D1, D20 |
| 2 | DMP2069UFY4 | azonenberg_pcb:DFN_3_DIODES_X2DFN2015-3 | Q12, Q22 |
| 2 | TXB0104RUT | azonenberg_pcb:QFN_12_0.4MM_2x2MM | U29, U30 |
| 2 | XILINX_JTAG_ICESIDE | azonenberg_pcb:XILINX_JTAG_PTH_MOLEX_0878311420 | J3, J4 |
| 1 | 0.1 | azonenberg_pcb:EIA_0402_RES_NOSILK | R179 |
| 1 | 10 uF 16V | azonenberg_pcb:EIA_1206_CAP_NOSILK | C130 |
| 1 | 10 uH | azonenberg_pcb:EIA_1210_CAP_NOSILK | L12 |
| 1 | 10.2K | azonenberg_pcb:EIA_0402_RES_NOSILK | R102 |
| 1 | 12.1k 1% | azonenberg_pcb:EIA_0402_RES_NOSILK | R6 |
| 1 | 125 MHz | azonenberg_pcb:OSCILLATOR_2.0x1.6 | U33 |
| 1 | 2.2 uF | azonenberg_pcb:EIA_1206_CAP_NOSILK | C129 |
| 1 | 2.2 uH 8.2A | azonenberg_pcb:INDUCTOR_TDK_SPM6530 | L6 |
| 1 | 2.55K | azonenberg_pcb:EIA_0402_RES_NOSILK | R101 |
| 1 | 232K | azonenberg_pcb:EIA_0402_RES_NOSILK | R104 |
| 1 | 24K 1% | azonenberg_pcb:EIA_0402_RES_NOSILK | R112 |
| 1 | 25 MHz | azonenberg_pcb:OSCILLATOR_2.0x1.6 | U7 |
| 1 | 2A fast | azonenberg_pcb:EIA_0402_RES_NOSILK | F1 |
| 1 | 2x10 HEADER | azonenberg_pcb:CONN_HEADER_2.54MM_2x10_RA_TRORIG | P2 |
| 1 | 324K | azonenberg_pcb:EIA_0402_RES_NOSILK | R111 |
| 1 | 330 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C63 |
| 1 | 4.7K 1% | azonenberg_pcb:EIA_0402_RES_NOSILK | R113 |
| 1 | 464K | azonenberg_pcb:EIA_0402_RES_NOSILK | R105 |
| 1 | 470 | azonenberg_pcb:EIA_0402_RES_NOSILK | R177 |
| 1 | 475K | azonenberg_pcb:EIA_0402_RES_NOSILK | R109 |
| 1 | 649K | azonenberg_pcb:EIA_0402_RES_NOSILK | R107 |
| 1 | 71.5K 0.1% | azonenberg_pcb:EIA_0402_RES_NOSILK | R18 |
| 1 | 806K | azonenberg_pcb:EIA_0402_RES_NOSILK | R106 |
| 1 | ADA4937-2 | azonenberg_pcb:QFN_24_0.5MM_4x4MM | U31 |
| 1 | ADG726 | azonenberg_pcb:QFN_48_0.5MM_7x7MM | U8 |
| 1 | BEL_FUSE_0826-1G1T-23-F | azonenberg_pcb:CONN_BELFUSE_0826_1G1T_23_F | J1 |
| 1 | CONN_3_PWROUT | azonenberg_pcb:CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | K1 |
| 1 | GPAK_ZIF | azonenberg_pcb:CONN_HEADER_2.54MM_2x10_RA_TRORIG | P1 |
| 1 | KSZ9031RN | azonenberg_pcb:QFN_48_0.5MM_7x7MM | U5 |
| 1 | LTC3374-QFN | azonenberg_pcb:QFN_38_0.5MM_5x7MM | U3 |
| 1 | MIC2288-DFN | azonenberg_pcb:DFN_8_0.5MM_2x2MM | U1 |
| 1 | W25Q32FW | azonenberg_pcb:DFN_8_1.27MM_6x5MM | U6 |
| 1 | XC7A100T-1FTG256C | azonenberg_pcb:BGA_256_17x17_FULLARRAY_1MM | U2 |
| 1 | XILINX_JTAG | azonenberg_pcb:XILINX_JTAG_PTH_MOLEX_0878311420 | J2 |
Questions
How big is the Gp4-hil PCB?
It measures 160 × 62 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Gp4-hil use?
450 parts, built around the SIP32408EVB, KSZ9031RNXCA, INA199A2RSW and TS3A4751PWR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gp4-hil KiCad files?
From the azonenberg/openfpga repository on GitHub, at the commit this page was made from: the board is boards/gp4-hil/gp4-hil.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gp4-hil design in my own project?
Its repository states no licence, so its author keeps all rights: ask azonenberg before reusing the design.
More from azonenberg/openfpga
3- 4 layers37 × 28 mm
- 4 layers28.5 × 28 mm
Similar boards
- 4 layers56 × 64 mm
- 10 layers130 × 90 mm
- 8 layers154 × 125 mm
- 4 layers87 × 59.8 mm
- 4 layers140 × 100 mm
- 10 layers151 × 111 mm
Switch engine
azonenberg/latentred
Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch
369 parts36BSD-3-Clause - 4 layers100.5 × 62.5 mm
Baset1-media converter
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
180 parts17BSD-3-Clause - 4 layers120 × 120 mm
Yellow
NabuCasa/yellow
Home Assistant Yellow - hardware for Home Assistant which grows with your needs.
322 parts116