

EV12Controller V2
Contains all prototype info and files
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 102
- Pads
- 335
- Tracks, vias
- 161, 17
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 10 Jul 2023
- Updated
- 11 Jul 2023
Overview
EV12Controller V2 is an open-source printed circuit board by S-A-M-J, from the S-A-M-J/12EV repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 78 parts on 102 nets, routed with 161 tracks and 17 vias.
It is built around the ESP32-WROOM-32, TPS5430DDA and SS8050, with the SP0503BAHTG among its other parts. Its parts include 15 capacitors, 15 resistors, 4 ICs, 3 diodes and 3 transistors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesTPS5430DDA
ESOP-8-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersSS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)SP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.md12EV
Contains all prototype info and files
CAD -> contains all needed 3d printing files in .step format.
PCB -> contains all needed info and engineering files for the custom control pcb
firmware -> contains arduino code for the esp32 on the custom control board
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R7, R8, R9, R14 |
| 4 | 01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left | LIDAR1, Motor1, Motor2, Motor3 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 2.54_3x2 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | SM1, SM2, SM3 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5 |
| 3 | 47uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C8, C9, C10 |
| 3 | G*** | kibuzzard-6488F643 | kibuzzard-6488F643, kibuzzard-6488F643, kibuzzard-6488F643 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R10, R12 |
| 2 | 02x03 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | Servo1/2, Servo3/4 |
| 2 | 02x08 | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical_SMD | M1/M2, M2/M3 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C15 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R6, R13 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 1x8_2.54 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical_SMD_Pin1Left | SM1A1, SM3B1 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C1, C6 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | I2C1, UART1 |
| 2 | DNP(0.1uF) | Capacitor_SMD:C_0603_1608Metric | C4, C12 |
| 2 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | BOOT1, RST1 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | +12V_IN1, +VEM_IN1 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 150R | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 22uH | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | L1 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 3.24k | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 330uF(Tantalum) | Capacitor_SMD:C_1206_3216Metric | C11 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 40V 2A | Diode_SMD:D_SMA | D3 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | G*** | kibuzzard-6488F506 | kibuzzard-6488F506 |
| 1 | G*** | kibuzzard-6488F773 | kibuzzard-6488F773 |
| 1 | G*** | kibuzzard-6488F604 | kibuzzard-6488F604 |
| 1 | G*** | kibuzzard-6488F56C | kibuzzard-6488F56C |
| 1 | G*** | kibuzzard-6488F768 | kibuzzard-6488F768 |
| 1 | G*** | kibuzzard-6488F5F3 | kibuzzard-6488F5F3 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | Jumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | TPS5430DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | XH_1x2 | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | EM1 |
| 1 | esp32_prog_conn_2x3_2.54 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
More from S-A-M-J/12EV
1- 2 layers84 × 64 mm

Similar boards
- 2 layers96 × 74.4 mm

Monolith
luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
138 parts45 - 2 layers68 × 54 mm

Controller
byrantech/stepcraft-3-d600-controller
Open-source FluidNC Controller for the Stepcraft-3/D.600 system.
97 parts2MIT - 2 layers190.5 × 121.8 mm

Gantry PCBv2
4rynv/Eklavya_Gantry
an attempt to automate screwing out and in of screw holes arranged in a matrix formation
173 parts12MIT - 2 layers101.2 × 199.1 mm

- 4 layers60 × 60 mm

3117 AUSIGN
r4hulrr/ausign
Real-time Auslan (Australian Sign Language) to English speech translation glove. Built with ESP32-S3, flex sensors, IMU on a custom PCB, and a Bluetooth-connected Python GUI.
151 parts3MIT - 2 layers60 × 77.7 mm

- 2 layers61 × 77.8 mm

- 2 layers54 × 100.5 mm

Desk control
mubarizahmed/desk_control
Firmware for an ESP32 based physical productivity widget
38 parts
Questions
How big is the EV12Controller V2 PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EV12Controller V2 use?
78 parts, built around the ESP32-WROOM-32, TPS5430DDA, SS8050 and SP0503BAHTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EV12Controller V2 KiCad files?
From the S-A-M-J/12EV repository on GitHub, at the commit this page was made from: the board is pcb/EV12Controller/EV12Controller_V2/EV12Controller_V2.kicad_pcb and its schematic pcb/EV12Controller/EV12Controller/EV12Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EV12Controller V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask S-A-M-J before reusing the design.