
Can lin bridge
ryanhaus/sandbox
Sandbox area for small tests and projects that don't constitute a full repo

Sandbox area for small tests and projects that don't constitute a full repo
Can adapter is an open-source printed circuit board by ryanhaus, from the ryanhaus/sandbox repository on GitHub. It is a 2-layer board of 27.2 × 23.4 mm with 22 parts on 34 nets, routed with 122 tracks and 27 vias.
It is built around the ATA6560-GBQW-N, 0ZCG0020AF2C and BAT54T1G. Its parts include 4 capacitors, 4 connectors, 3 resistors, 2 ICs and 2 diodes. It belongs with the interfaces and adapters boards and the PIC boards of this library.
Sandbox area for small tests and projects that don't constitute a full repo
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2 |
| 1 | 0ZCG0020AF2C | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 47u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | ATA6560-GBQW-N | ATA6560-GBQW-N:SON65P300X300X90-9N-D | IC2 |
| 1 | BAT54T1G | Diode_SMD:D_SOD-123 | D1 |
| 1 | CAN_PWR | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | CONN0 | Connector_PinHeader_1.27mm:PinHeader_1x08_P1.27mm_Vertical | J2 |
| 1 | CONN1 | Connector_PinHeader_1.27mm:PinHeader_1x08_P1.27mm_Vertical | J3 |
| 1 | GREEN | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | PIC18F26Q83T-I_5N | PIC18F26Q83T-I/5N:QFN65P600X600X100-29N-D | IC1 |

ryanhaus/sandbox
Sandbox area for small tests and projects that don't constitute a full repo

ryanhaus/sandbox
Sandbox area for small tests and projects that don't constitute a full repo

filmolino/SlideScanner
The Filmolino SlideScanner is a device that makes it easy to scan slides in magazines fully automated using a modified slide projector and a digital camera.

ryanhaus/rowan-baja-daq
Data Acquisition system for Rowan University's Baja SAE 2025-2027 team.






It measures 27.2 × 23.4 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the ATA6560-GBQW-N, 0ZCG0020AF2C and BAT54T1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ryanhaus/sandbox repository on GitHub, at the commit this page was made from: the board is can-adapter-pcb/can-adapter.kicad_pcb and its schematic bluetooth-adapter-power-control/bluetooth-adapter-power-control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ryanhaus before reusing the design.