filmolino/SlideScanner28The Filmolino SlideScanner is a device that makes it easy to scan slides in magazines fully automated using a modified slide projector and a digital camera.
Filmolino is an open-source printed circuit board by filmolino, from the filmolino/SlideScanner repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50 × 50 mm with 37 parts on 53 nets, routed with 232 tracks and 24 vias.
It is built around the AQY212GSZ, SN74LVC1G14DBV and BSS138, with the BAS21, 0ZCF0075AF2C and 0ZCG0020AF2C among its other parts. Its parts include 14 resistors, 5 ICs, 5 connectors, 4 diodes and 4 transistors.
The Filmolino SlideScanner is a device that makes it easy to scan slides in magazines fully automated using a modified slide projector and a digital camera. It controls the slide projector and a digital camera using a cable release or an infrared remote control (Nikon, Canon, Pentax, Sony, Olympus, Minolta). New cable releases and IR controls can easyily be added to the software.
Thanks to the M5StampC3 from M5Stack using a ESP-32 core together with 16M Flash, 8M PSRAM and a built in 3.7V/500mAh Lithium battery it is also possible to use the device without a power supply and remote control the SlideScanner through a web interface over WiFi. The scanner has it's own access point to which you can connect.
The Filmolino SlideScanner is completely open source, so you can easy build your own!
For more info about the project please visit Filmolino SlideScanner
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 180R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R6, R7 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R8, R11 |
| 3 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R9, R13 |
| 3 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | Grove 90° | Lubasol:Grove_Con_1x04_2mm_horizontal | J1, J2, J5 |
| 2 | 10u/10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | AQY212GSZ | Lubasol:SOP-4_4.4x4.3mm_P2.54mm | U1, U2 |
| 2 | AQY212SX (550mA) | Lubasol:SOP-4_4.4x4.3mm_P2.54mm | U3, U4 |
| 2 | BAS21 | Package_TO_SOT_SMD:SOT-23 | D1, D2 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 0ZCF0075AF2C | Lubasol:BelFuse_0ZCF_Metric_Pad2.30x5.60mm | F2 |
| 1 | 0ZCG0020AF2C | Lubasol:BelFuse_0ZCG_Metric_Pad1.78x3.50mm | F1 |
| 1 | 100n/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14 |
| 1 | 39R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | AudioJack3 | Lubasol:Jack_2.5mm_Lumberg_1501_04 | J4 |
| 1 | BP103B | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | Q4 |
| 1 | BZX84C3V6 | Package_TO_SOT_SMD:SOT-23 | D4 |
| 1 | Conn_02x15_Odd_Even | Lubasol:PinHeader_2x15_P2.54mm_Holes0.75mm_Vertical | J3 |
| 1 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | SFH4544 | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | D3 |
| 1 | SN74LVC1G14DBV | Package_TO_SOT_SMD:SOT-23-5 | U5 |
trappitsch/cryostorage
This repository holds documentation, code, and hardware designs to control the cryostorage chamber. The purpose of this chamber is to allow storing of frozen samples in between characterization and analysis runs.
ryanhaus/sandbox
Sandbox area for small tests and projects that don't constitute a full repo
ductomn/Swarm-robot
Bachelor Thesis - Design and implementation of a cooperative robotic platform with simple communication
Zamoe/EEE3088F-2024-VLLMUH015-MHMZAM005
GIt Repo for EEE3088F 2024 at UCT
qrotx/qrotx-singleband-hw
Schematics and PCB design
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the AQY212GSZ, SN74LVC1G14DBV, BSS138 and BAS21. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the filmolino/SlideScanner repository on GitHub, at the commit this page was made from: the board is Hardware/KiCAD/filmolino.kicad_pcb and its schematic Hardware/KiCAD/filmolino.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).