2 layers27.2 × 23.4 mm
Can adapter
ryanhaus/sandbox
Sandbox area for small tests and projects that don't constitute a full repo
22 parts
2 layers20 × 24 mm
Can lin bridge
ryanhaus/sandboxSandbox area for small tests and projects that don't constitute a full repo
- Size
- 20 × 24 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 35
- Pads
- 94
- Tracks, vias
- 85, 38
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Jun 2025
- Updated
- 8 Jul 2026
Overview
Can lin bridge is an open-source printed circuit board by ryanhaus, from the ryanhaus/sandbox repository on GitHub. It is a 2-layer board of 20 × 24 mm with 24 parts on 35 nets, routed with 85 tracks and 38 vias.
It is built around the TJA1029TK/20/1J, TJA1042TK/3/2Z and BAT54WS-7-F-CN. Its parts include 5 capacitors, 4 resistors, 4 connectors, 3 ICs and 3 diodes. It belongs with the interfaces and adapters boards and the PIC boards of this library.
Main components
3README
README.mdsandbox
Sandbox area for small tests and projects that don't constitute a full repo
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | LED | LED_SMD:LED_0402_1005Metric | D1, D2 |
| 1 | 120 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | BAT54WS-7-F | Diode_SMD:D_SOD-323 | D3 |
| 1 | CAN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | ICSP | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J1 |
| 1 | LIN | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | PIC18F26Q83T-I_5N | PIC18F26Q83T-I5N:QFN65P600X600X100-29N-D | IC1 |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | TJA1029TK/20/1J | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U1 |
| 1 | TJA1042TK/3/2Z | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U2 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
More from ryanhaus/sandbox
2- 2 layers16.4 × 20.6 mm
Bluetooth adapter power control
ryanhaus/sandbox
Sandbox area for small tests and projects that don't constitute a full repo
14 parts
Similar boards
- 8 layers136.9 × 155.9 mm
- 2 layers89 × 55.5 mm
Mintypcb
jackw01/pi-tin
Open source raspberry pi handheld retro gaming console
129 parts75CERN-OHL-W-2.0 - 2 layers168.8 × 95.8 mm
- 2 layers60 × 98 mm
ENNOID Dual Gate Driver
jagdeepsingh02/ENNOID-Dual-Gate-Driver
Dual Gate Driver for IGBT or Mosfet modules
146 parts5 - 2 layers87.4 × 70 mm
- 4 layers75 × 75 mm
USAN r0
alu-source/open_USAN
This project documents the software and hardware of an ultrasonic anemometer, created in cooperation between FH Aachen and DLR Göttingen
262 parts1 - 2 layers89 × 55.5 mm
Mintypcb
SophBG/pi-tin-mod
Personal build of jackw01's Pi Tin (3D-printed clamshell version, KiCad 10). It adds 10 RGB LEDs under the buttons, a centred speaker, a USB-drive mode for the ROMs, and ESD protection on USB, and runs on an Orange Pi…
158 parts1 - 2 layers105.5 × 81.1 mm
Buck
almondsun/DynamicSystemsAndControl
Dynamic Systems and Control coursework: Buck converter modeling, reports, KiCad PCB and STM32 firmware
77 parts
Questions
How big is the Can lin bridge PCB?
It measures 20 × 24 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Can lin bridge use?
24 parts, built around the TJA1029TK/20/1J, TJA1042TK/3/2Z and BAT54WS-7-F-CN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Can lin bridge KiCad files?
From the ryanhaus/sandbox repository on GitHub, at the commit this page was made from: the board is can-lin-bridge/can-lin-bridge.kicad_pcb and its schematic bluetooth-adapter-power-control/bluetooth-adapter-power-control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Can lin bridge design in my own project?
Its repository states no licence, so its author keeps all rights: ask ryanhaus before reusing the design.