4 layers101 × 22 mm
4 layers100 × 22 mm
TLE8888 Module
rusefi/hw_modular13*DEPRECATED* rusEFI prototyping hardware
- Size
- 100 × 22 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 97
- Pads
- 336
- Tracks, vias
- 1,176, 334
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Feb 2019
- Updated
- 11 Dec 2023
Overview
TLE8888 Module is an open-source printed circuit board by rusefi, from the rusefi/hw_modular repository on GitHub. It is a 4-layer board of 100 × 22 mm with 70 parts on 97 nets, routed with 1,176 tracks and 334 vias.
It is built around the TLE8888QK, IPD30N06S2L-23 and MBRS3200T3G, with the PESD1CAN-UX among its other parts. Its parts include 34 resistors, 16 capacitors, 15 diodes, 3 connectors and 1 IC.
Main components
4
TLE8888QK
LQFP-100(14x14)LQFP-100(14x14) Power Management - Specialized ROHSInfineon TechnologiesPower Management - Specialized
IPD30N06S2L-23
TO-252-55℃~+175℃ 1 N-channel 1.091nF 100W 107pF 23mΩ@10V 2V 30A 42nC@10V 55V N-Channel TO-252 MOSFETs ROHSInfineon TechnologiesMOSFETs
MBRS3200T3G
DO-214AA-65℃~+175℃ 1 Independent 100A 1mA@200V 200V 3A 840mV DO-214AA Schottky Diodes ROHSTokmasSchottky Diodes
PESD1CAN-UX
SOT-323-55℃~+150℃ 150W@8/20us 1nA 2 24V 27.8V 3A@8/20us 50V 9.3pF Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-323 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
README
cj125_Module/readme.mdSee also https://github.com/rusefi/rusefi/wiki/WBO
on this board UR does NOT have build-in resistor divider
on this board UA resistor divider with 1.68 ratio
| Module Pin | Sensor wire |
|---|---|
| HT1 | H+ constant +12v |
| GATE | H- low side heater control |
| VM1 | VS/IP=VM=common virtual ground for VS and IP |
| IP1 | IP |
| UN1 | VS pin 6, black |
| IA1 | CalR pin 5, green |
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 1K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R11, R14, R24, R25, R26, R27, R28, R30, R31, R32, R33, R34 |
| 13 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3, D4, D5, D7, D8, D9, D10, D11, D13, D14, D15, D16, D17 |
| 8 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C4, C5, C6, C10, C13, C14, C16 |
| 8 | DNP | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9, R12, R13, R15, R16, R17, R18, R19 |
| 5 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3, R4, R8, R10 |
| 3 | 0 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R6, R7 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7, C8, C9 |
| 2 | 2.7K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R20, R21 |
| 2 | 4.7nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C11 |
| 2 | DNP | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C12, C15 |
| 2 | TLE8888 LOGO DNP | Symbol:TLE8888 | R23, R23 |
| 1 | 100UF 50V | Capacitor_SMD:CP_Elec_10x10.5 | C2 |
| 1 | 120R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R22 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J3 |
| 1 | Conn_02x39_Odd_Even | Connector_PinHeader_2.54mm:Conn_TLE8888_Module | J2 |
| 1 | DNP CORNER HOLE | Connector:1pin | J1 |
| 1 | IPD30N06S2L-23 | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | MBRS3200T3G | Diode_SMD:D_SMB | D1 |
| 1 | PESD1CAN-UX | Package_TO_SOT_SMD:SOT-323_SC-70_Handsoldering | D2 |
| 1 | TLE8888QK | Package_QFP:LQFP-100_14x14mm_P0.5mm_THERMAL | U2 |
Questions
How big is the TLE8888 Module PCB?
It measures 100 × 22 mm and has 4 copper layers, 1.6 mm thick.
What parts does the TLE8888 Module use?
70 parts, built around the TLE8888QK, IPD30N06S2L-23, MBRS3200T3G and PESD1CAN-UX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TLE8888 Module KiCad files?
From the rusefi/hw_modular repository on GitHub, at the commit this page was made from: the board is TLE8888_Module/TLE8888_Module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TLE8888 Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask rusefi before reusing the design.
More from rusefi/hw_modular
8- 2 layers81 × 22 mm
- 2 layers45.4 × 22 mm
- 2 layers43.4 × 20.3 mm
- 2 layers100 × 100 mm
- 2 layers43 × 22 mm
- 2 layers100 × 100 mm
- 2 layers59.1 × 40.6 mm
Similar boards
- 2 layers267 × 300 mm
Output.Panel R0.5.1 300x300 2layer step1 Modified
rusefi/hw_microRusEfi
microRusEfi board for rusEfi ECU
2,371 parts98 - 4 layers181.4 × 77.2 mm
NixieNTPClock
bastian-bou/NixieNTPClock
Nixie clock around ESP32 connected to a NTP server
64 parts3GPL-3.0 - 2 layers22 × 18 mm
Lights Breakout
EmbeddedDesign/GotT-Translation-Circuit
A Bluetooth voice modulator for Dalek speech
5 parts2MIT - 4 layers135 × 82.5 mm
- 4 layers103 × 82.4 mm
- 6 layers50 × 23 mm
Esp32p4amoled3.19
v-cu/dpf-load-monitor-wide
ESP32-P4 diagnostic display for VAG diesels — live DPF and engine data over CAN (UDS) on a 3.19" ultra-wide AMOLED. Firmware, KiCad files, BOM and 3D enclosure.
115 parts12 - 2 layers156 × 66 mm
Dash 6.8
romioRN/Dash6.8-hardware
wifi name "service", password 12345678, connect to 192.167.4.1
152 parts11Apache-2.0 - 2 layers49.5 × 40.5 mm
Hcv
chrkir/hcv
Local Viessmann E3 CAN-bus to MQTT bridge for Vitocal heat pumps. Features Home Assistant Auto-Discovery, ESP32 firmware, and Open Hardware.
32 parts9