4 layers101 × 22 mm
2 layers43 × 22 mm
TLE7209 Module
rusefi/hw_modular13*DEPRECATED* rusEFI prototyping hardware
- Size
- 43 × 22 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 13
- Pads
- 84
- Tracks, vias
- 186, 285
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Feb 2019
- Updated
- 11 Dec 2023
Overview
TLE7209 Module is an open-source printed circuit board by rusefi, from the rusefi/hw_modular repository on GitHub. It is a 2-layer board of 43 × 22 mm with 13 parts on 13 nets, routed with 186 tracks and 285 vias.
It is built around the TLE7209-2R and TPSMB24A. Its parts include 5 resistors, 4 capacitors, 2 connectors, 1 IC and 1 diode.
Main components
2
TLE7209-2R
DSO-20150mΩ 5A 5V~28V Bipolar Driver Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Built-in charge pump、Power-on reset SPI Yes DSO-20 Stepper Motor Driver ROHSInfineon TechnologiesGate Drivers
TPSMB24A
SMB(DO-214AA)-65℃~+175℃ 18.4A@10/1000us 20.5V 25.2V 33.2V 600W@10/1000us 91nA IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional SMB(DO-214AA) ESD and Surge Protection (TVS/ESD) ROHSLittelfuseTVS
README
cj125_Module/readme.mdSee also https://github.com/rusefi/rusefi/wiki/WBO
on this board UR does NOT have build-in resistor divider
on this board UA resistor divider with 1.68 ratio
| Module Pin | Sensor wire |
|---|---|
| HT1 | H+ constant +12v |
| GATE | H- low side heater control |
| VM1 | VS/IP=VM=common virtual ground for VS and IP |
| IP1 | IP |
| UN1 | VS pin 6, black |
| IA1 | CalR pin 5, green |
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_8x10 | C4 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 33nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 47K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | Conn_01x01 | Connector:1pin | J3 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J1 |
| 1 | TLE7209-2R | Package_SO:HSOP-20-1EP_11.0x15.9mm_P1.27mm_SlugDown_ThermalVias | U1 |
| 1 | TPSMB24A | Diode_SMD:D_SMA | D1 |
Questions
How big is the TLE7209 Module PCB?
It measures 43 × 22 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TLE7209 Module use?
13 parts, built around the TLE7209-2R and TPSMB24A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TLE7209 Module KiCad files?
From the rusefi/hw_modular repository on GitHub, at the commit this page was made from: the board is TLE7209_or_MC33186_H-Bridge_Breakout/TLE7209_Module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TLE7209 Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask rusefi before reusing the design.
More from rusefi/hw_modular
8- 2 layers81 × 22 mm
- 4 layers100 × 22 mm
- 2 layers45.4 × 22 mm
- 2 layers43.4 × 20.3 mm
- 2 layers100 × 100 mm
- 2 layers100 × 100 mm
- 2 layers59.1 × 40.6 mm
Similar boards
- 2 layers40 × 20 mm
- 2 layers74.9 × 49.5 mm
- 2 layers35 × 29 mm
MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm
AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm
- 2 layers95 × 95 mm
Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm
Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0