Skip to the content
2 layers59.1 × 40.6 mmTLE8110ED, the printed circuit board in 3D

*DEPRECATED* rusEFI prototyping hardware

Size
59.1 × 40.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
34
Pads
95
Tracks, vias
291, 18
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
25 Feb 2019
Updated
11 Dec 2023

Overview

TLE8110ED is an open-source printed circuit board by rusefi, from the rusefi/hw_modular repository on GitHub. It is a 2-layer board of 59.1 × 40.6 mm with 7 parts on 34 nets, routed with 291 tracks and 18 vias.

It is built around the TLE8110ED. Its parts include 2 connectors and 1 IC.

Main components

1

README

cj125_Module/readme.md

See also https://github.com/rusefi/rusefi/wiki/WBO

iBom

on this board UR does NOT have build-in resistor divider

on this board UA resistor divider with 1.68 ratio

Module PinSensor wire
HT1H+ constant +12v
GATEH- low side heater control
VM1VS/IP=VM=common virtual ground for VS and IP
IP1IP
UN1VS pin 6, black
IA1CalR pin 5, green

Parts

7
QtyValueFootprintReferences
4Mounting_HoleMounting_Holes:MountingHole_3.2mm_M3_DIN965MK1, MK2, MK3, MK4
1Conn_01x18Pin_Headers:Pin_Header_Straight_1x18_Pitch2.54mmJ1
1Screw_Terminal_01x16Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_16polJ2
1TLE8110EDTLE8110ED:PG-DSO-36-72U1

More from rusefi/hw_modular

8
  • 4 layers101 × 22 mmLowside, the printed circuit board in 3D

    Lowside

    rusefi/hw_modular

    *DEPRECATED* rusEFI prototyping hardware

    348 parts13
  • 2 layers81 × 22 mmAnalog Input Module, the printed circuit board in 3D

    Analog Input Module

    rusefi/hw_modular

    *DEPRECATED* rusEFI prototyping hardware

    111 parts13
  • 4 layers100 × 22 mmTLE8888 Module, the printed circuit board in 3D

    TLE8888 Module

    rusefi/hw_modular

    *DEPRECATED* rusEFI prototyping hardware

    70 parts13
  • 2 layers45.4 × 22 mmCj125 Module, the printed circuit board in 3D

    Cj125 Module

    rusefi/hw_modular

    *DEPRECATED* rusEFI prototyping hardware

    38 parts13
  • 2 layers43.4 × 20.3 mmHi lo, the printed circuit board in 3D

    Hi lo

    rusefi/hw_modular

    *DEPRECATED* rusEFI prototyping hardware

    31 parts13
  • 2 layers100 × 100 mmTest board 48, the printed circuit board in 3D

    Test board 48

    rusefi/hw_modular

    *DEPRECATED* rusEFI prototyping hardware

    18 parts13
  • 2 layers43 × 22 mmTLE7209 Module, the printed circuit board in 3D

    TLE7209 Module

    rusefi/hw_modular

    *DEPRECATED* rusEFI prototyping hardware

    13 parts13
  • 2 layers100 × 100 mmNUCLEO144 wing, the printed circuit board in 3D

    NUCLEO144 wing

    rusefi/hw_modular

    *DEPRECATED* rusEFI prototyping hardware

    12 parts13

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the TLE8110ED PCB?

It measures 59.1 × 40.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TLE8110ED use?

7 parts, built around the TLE8110ED. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TLE8110ED KiCad files?

From the rusefi/hw_modular repository on GitHub, at the commit this page was made from: the board is TLE8110ED_breakout_board/TLE8110ED.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the TLE8110ED design in my own project?

Its repository states no licence, so its author keeps all rights: ask rusefi before reusing the design.