2 layers88.9 × 88.9 mm
Main board v2
NeverNotJohn/CSUF-NASA-USLI-2026
California State University Fresno (CSUF) Github for the 2025-2026 NASA USLI Competition
29 parts2
2 layers140 × 285.9 mm
FishShocker9000
rmranjitkarNULL/FishShocker9000TODO -[ ] Redo Readme -[ ] Make assembly guide -[ ] add
- Size
- 140 × 285.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 206
- Nets
- 117
- Pads
- 434
- Tracks, vias
- 1,358, 110
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 13 Jun 2025
- Updated
- 6 May 2026
Overview
FishShocker9000 is an open-source printed circuit board by rmranjitkarNULL, from the rmranjitkarNULL/FishShocker9000 repository on GitHub. It is a 2-layer board of 140 × 285.9 mm with 206 parts on 117 nets, routed with 1,358 tracks and 110 vias.
It is built around the SN754410NE, MP2331HGTL-Z and DEV-16771, with the P70-1000045R, FQP27P06 and IRLZ44N among its other parts. Its parts include 146 connectors, 21 resistors, 13 diodes, 10 ICs and 8 capacitors.
Main components
6
SN754410NE
PDIP-16-40℃~+85℃ 1A 4.5V~36V 4.5V~5.5V Bipolar Driver Over temperature protection、Dead-time / shoot-through protection PDIP-16 Stepper Motor Driver ROHSTexas InstrumentsStepper Motor Driver
MP2331HGTL-Z
SOT-583-40℃~+125℃@(TJ) 1 1.2MHz 200uA 2A 4.2V~24V Adjustable Buck Buck Built-in Yes SOT-583 DC-DC Converters ROHSMonolithic Power SystemsDC-DC ConvertersDEV-16771
-- New Arrivals ROHSSparkFun ElectronicsUncategorisedP70-1000045R
SMDSMD Pogo Pin Spring Probe Connector ROHSHarwinPogo Pin Spring Probe Connector
FQP27P06
TO-220-55℃~+175℃ 1 P-Channel 1.4nF 120W 27A 43nC@10V 4V 60V 70mΩ@10V TO-220 MOSFETs ROHSonsemiMOSFETsIRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised
README
README.mdFishShocker9000
A hardware/software system for high-voltage pulse generation and control, integrating custom PCB design, embedded firmware, and testing tools.
Overview
FishShocker9000 was developed as a project to explore embedded systems design, PCB layout, and high-voltage electronics.
The system combines custom hardware with C/C++ firmware to generate controlled electrical pulses, managed through a modular and extensible software stack.
Hardware
- Custom PCB Design (schematics + board layouts)
- Power delivery circuits for safe and reliable pulse generation
- Signal conditioning and protection hardware
- Mixed-signal layout considerations for high-voltage operation
Features
- Precise pulse generation and control
- Configurable timing and waveform parameters
- Modular design for hardware/firmware scalability
- PCB + firmware tightly integrated for performance and safety
Repository Structure
FishShocker9000/ ├── include/ # Header files ├── lib/ # Custom libraries ├── src/ # Firmware source code ├── test/ # Testing and validation scripts ├── pcb/ # PCB design files (schematics, layouts) └── README.md # Project documentation
Future Improvements
- Improve PCB design for efficiency and miniaturization
- Expand safety features and protection circuitry
TODO -[ ] Redo Readme -[ ] Make assembly guide -[ ] add
Parts
206| Qty | Value | Footprint | References |
|---|---|---|---|
| 144 | P70-1000045R | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10, J11, J100, J101, J102, J103, J104, J105, J106, J107, J108, J109, J110, J111, J112, J113 +128 |
| 12 | 220 | Resistor_SMD:R_0805_2012Metric | R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19 |
| 12 | LED | LED_SMD:LED_0805_2012Metric | D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13 |
| 6 | SN754410NE | Package_DIP:DIP-16_W7.62mm | U23, U24, U25, U26, U29, U30 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 22u | Capacitor_SMD:C_1206_3216Metric | C6, C7, C9 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R5 |
| 1 | 0u1 | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 10p | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 15k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R49 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 1u | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 20 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 3u3 | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R48 |
| 1 | 40k2 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 600 @ 600 MHz | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 604k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 6n8 | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 7k68 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CLIFF_FC681465S_SMT_Horizontal | J1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J146 |
| 1 | DAC5311xDCK | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U19 |
| 1 | DEV-16771 | Library:Teensy 4.1 | U3 |
| 1 | FQP27P06 | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | MP2331HGTL-Z | Library:SOT583_MP2331H | U16 |
| 1 | OPA197xD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U20 |
Similar boards
- 4 layers200 × 110 mm
- 2 layers62.9 × 32.4 mm
Volume AlpsRK16814MG
mithat/Volume-AlpsRK16814MG
Alps RK16814MG motorized potentiometer with H-bridge motor drive.
12 parts6 - 2 layers94.8 × 47.8 mm
- 2 layers69.9 × 52.6 mm
ArduiBodet
PatriceG/ArduiBodet
Horloge mère pour Horloge de type Bodet pilotée par Arduino
22 parts5GPL-3.0 - 2 layers162.6 × 123.2 mm
To print
anorimaki/selfbalancing-robot
A buck converter to generate the 5V power rail would have been a better choice because it would be more efficient (extending battery life) and eliminate the need of a second battery (the circuit could be plugged with…
124 parts2 - 2 layers111.8 × 95.3 mm
- 2 layers80.1 × 85.2 mm
Omni wheel
kashishkebab9/omni-mapper
Omni-Wheeled Robot with custom PCB All Mechanical Assemblies, PCBs, Firmware, and Software designed, architected and programmed by Kashish Garg
52 parts1MIT
Questions
How big is the FishShocker9000 PCB?
It measures 140 × 285.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FishShocker9000 use?
206 parts, built around the SN754410NE, MP2331HGTL-Z, DEV-16771 and P70-1000045R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FishShocker9000 KiCad files?
From the rmranjitkarNULL/FishShocker9000 repository on GitHub, at the commit this page was made from: the board is PCB/FishShocker9000_PCB/FishShocker9000.kicad_pcb and its schematic PCB/FishShocker9000_PCB/FishShocker9000.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FishShocker9000 design in my own project?
Its repository states no licence, so its author keeps all rights: ask rmranjitkarNULL before reusing the design.