
Open8-vga motherboard
adham404/Open8-VGA
An 8-bit computer from 74HC logic: microcoded CPU, VGA, PS/2, on-board editor and assembler. Play it in your browser.

Omni-Wheeled Robot with custom PCB All Mechanical Assemblies, PCBs, Firmware, and Software designed, architected and programmed by Kashish Garg
Omni wheel is an open-source printed circuit board by kashishkebab9, from the kashishkebab9/omni-mapper repository on GitHub, published under the MIT licence. It is a 2-layer board of 80.1 × 85.2 mm with 52 parts on 98 nets, routed with 388 tracks and 42 vias.
It is built around the SN754410NE and CD74HC04E. Its parts include 17 capacitors, 15 connectors, 7 ICs, 4 resistors and 2 inductors. It belongs with the STM32 boards of this library.
Omni-Wheeled Robot with custom PCB All Mechanical Assemblies, PCBs, Firmware, and Software designed, architected and programmed by Kashish Garg
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | .1 uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C10, C13, C14, C15, C16, C17 |
| 4 | 22uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8 |
| 4 | Conn_01x01_Pin | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | J8, J9, J10, J11 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C12 |
| 2 | 30.1k | Resistor_SMD:R_0603_1608Metric | R2, R4 |
| 2 | AP63301WU-7 | footprints:SOT95P280X100-6N | IC1, IC2 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SN754410NE | Package_DIP:DIP-16_W7.62mm | U1, U2 |
| 2 | STLINK | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5, J15 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 12V Input | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J7 |
| 1 | 12v TP | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | J1 |
| 1 | 158k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 3.3v TP | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | J13 |
| 1 | 4.7u | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 47pF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 56pF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 5V TP | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | J12 |
| 1 | 6.8u | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 93.1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | CD74HC04E | CD74HC04E:N14 | U4 |
| 1 | GND TP | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | J14 |
| 1 | Motor1_output | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J6 |
| 1 | Motor2_output | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J2 |
| 1 | Motor3_output | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J4 |
| 1 | Motor4_output | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J3 |
| 1 | SN74AC86DR | SN74AC86DR:D14 | U6 |
| 1 | STM32F030R8Tx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | SW_SPST | GF-123-0054:SW_GF-123-0054 | SW1 |
The 48 most common of 52 parts.

adham404/Open8-VGA
An 8-bit computer from 74HC logic: microcoded CPU, VGA, PS/2, on-board editor and assembler. Play it in your browser.


mithat/Volume-AlpsRK16814MG
Alps RK16814MG motorized potentiometer with H-bridge motor drive.


PatriceG/ArduiBodet
Horloge mère pour Horloge de type Bodet pilotée par Arduino

anorimaki/selfbalancing-robot
A buck converter to generate the 5V power rail would have been a better choice because it would be more efficient (extending battery life) and eliminate the need of a second battery (the circuit could be plugged with…


It measures 80.1 × 85.2 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the SN754410NE and CD74HC04E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kashishkebab9/omni-mapper repository on GitHub, at the commit this page was made from: the board is pcb/omni-wheel/omni-wheel.kicad_pcb and its schematic pcb/omni-wheel/omni-wheel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).