Skip to the content
123

FQP27P06

onsemiExtended

-55℃~+175℃ 1 P-Channel 1.4nF 120W 27A 43nC@10V 4V 60V 70mΩ@10V TO-220 MOSFETs ROHS

Part id
onsemi/FQP27P06
Category
MOSFETs
Package
TO-220
Pins
3
In stock
31 at JLCPCB (C462764)
Used on
52 open-source boards

Overview

The FQP27P06 is a MOSFET made by onsemi in a TO-220 package with 3 pins. -55℃~+175℃ 1 P-Channel 1.4nF 120W 27A 43nC@10V 4V 60V 70mΩ@10V TO-220 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Transistor_FET:FQP27P06, from KiCad's library) and its footprint (Package_TO_SOT_THT:TO-220-3_Vertical, from KiCad's library), ready for a KiCad board. 31 are in stock at JLCPCB (part C462764). 52 open-source boards in 42 repositories on GitHub use it.

Symbol

123
Transistor_FET:FQP27P06From KiCad's library

Footprint

123
Package_TO_SOT_THT:TO-220-3_VerticalFrom KiCad's library

Pinout

3
The pins of the FQP27P06
PinNameType
1GInput
2DPassive
3SPassive

Open-source boards using it

52See all 52
  • 2 layers30 × 64 mmRadio Bottom, the printed circuit board in 3D

    Radio Bottom

    mattronix/battery-board

    KiCad hardware project for the battery-to-radio interface of an AN/PRC‑152(A) reproduction radio. It contains two small PCBs that mate through spring‑loaded pogo‑pin contacts, plus a shared custom KiCad footprint…

    12 parts8CERN-OHL-W-2.0
  • 2 layers70 × 50 mmLed light project, the printed circuit board in 3D

    Led light project

    mattwach/portable_led_lamp

    Contains firmware, schematics and 3D models for a LED lamp that can accept a wide range of voltages.

    20 parts7GPL-3.0
  • 2 layers65 × 56 mmXDoor, the printed circuit board in 3D

    XDoor

    xHain-hackspace/xDoorPiHat

    Schematics and Boardfiles for PiHat that opens and closes the xDoor

    36 parts3
  • 4 layers200 × 110 mmLTDM RevC, the printed circuit board in 3D

    LTDM RevC

    aschmidt99/LTDM_Kit_RevC

    New LTDM Code that has render.cpp

    412 parts2
  • 2 layers78 × 103 mmEmbedded.old, the printed circuit board in 3D

    Embedded.old

    borisg912/3DNA

    This project creates a flat cylindrical DNA model with: - Magnetic DNA bases with color-coded NeoPixel LEDs and unique resistor values for identification - Interactive base pairing game that validates correct DNA base…

    121 parts2GPL-3.0
  • 2 layers47.8 × 57.9 mmESP8266-LolinV3-Lamp, the printed circuit board in 3D

    ESP8266-LolinV3-Lamp

    d-diot/ESP8266-LolinV3-Lamp

    A pcb for the NodeMCU Lolin V3 board with power management for a WS2812 LED strip

    30 parts2
  • 2 layers128 × 41.5 mmWeather station ext, the printed circuit board in 3D

    Weather station ext

    rbat05/SolarWeatherStation

    Self-sustaining weather monitoring system with dual-node architecture.

    16 parts2GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the FQP27P06?

Yes. The symbol is Transistor_FET:FQP27P06 and the footprint Package_TO_SOT_THT:TO-220-3_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the FQP27P06?

TO-220, with 3 pins. Its footprint is drawn on this page.

Where is the FQP27P06 datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the FQP27P06?

JLCPCB lists it as part C462764, with 31 in stock; the sellers' links on this page open their listings.

What can replace the FQP27P06?

Parts like it in the library: the IRF540NPBF by Infineon Technologies, the IRLZ44NPBF-HXY by HXY MOSFET, the IPP075N15N3G by Infineon Technologies and the IPP023N10N5 by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the FQP27P06?

52 boards in 42 repositories on GitHub; the most starred are listed on this page, with their KiCad files.