Skip to the content
2 layers30 × 64 mmRadio Bottom, the printed circuit board in 3D

KiCad hardware project for the battery-to-radio interface of an AN/PRC‑152(A) reproduction radio. It contains two small PCBs that mate through spring‑loaded pogo‑pin contacts, plus a shared custom KiCad footprint…

Size
30 × 64 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
10
Pads
36
Tracks, vias
84, 0
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
5 Jun 2026
Updated
25 Jun 2026

Overview

Radio Bottom is an open-source printed circuit board by mattronix, from the mattronix/battery-board repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 30 × 64 mm with 12 parts on 10 nets, routed with 84 tracks and 0 vias.

It is built around the FQP27P06. Its parts include 6 connectors, 2 resistors, 1 capacitor, 1 IC and 1 diode. It belongs with the radio and wireless boards of this library.

Main components

1

README

README.md

PRC‑152A Repro — Battery / Radio Interface Boards

KiCad hardware project for the battery-to-radio interface of an AN/PRC‑152(A) reproduction radio. It contains two small PCBs that mate through spring‑loaded pogo‑pin contacts, plus a shared custom KiCad footprint library for those mechanical contacts.

All boards are designed in KiCad 10 and built for fabrication/assembly at JLCPCB (Fabrication Toolkit export, JLCPCB BOM).


Repository layout

text
battery-board/
├── Battery Top/                      # Board that sits on the battery
│   ├── Battery Top/                  # KiCad project (.kicad_pro/.kicad_sch/.kicad_pcb)
│   │   └── production/               # Gerbers/BOM/positions for JLCPCB
│   └── BOM/                          # JLCPCB BOM spreadsheet
├── Radio Bottom/                     # Board that sits on the radio body
│   └── Battery Bottom/               # KiCad project (folder name differs from board name)
├── Kicad Footprint Libaries/
│   └── Radio Library.pretty/         # ← the shared custom footprint library
└── README.md

Note: a couple of folder names are inconsistent with the board names (Radio Bottom/Battery Bottom/...). The board you load is the .kicad_pro inside each, not the folder name.


The two boards

Battery Top

The interface board on the battery side. Carries power up to the radio and exposes the data line.

RefPartFootprintPurpose
J1JST XH 3‑pin verticalConnector_JST:...B3B-XH-ABattery power/data harness
J2, J3Pogo pinRadio Library:Pogo Battery 7MMVBAT+ contacts to radio
J5Pogo pinRadio Library:Pogo Battery 7MMDATA contact to radio
J4, J6Bolt padRadio Library:Bolt Pad 4.25GND / M4 mounting bolt
F11206 fuseFuse:Fuse_1206_3216MetricVBAT+ protection

Radio Bottom

The interface board on the radio side. It does battery current/power monitoring and switches the load.

RefPartFootprintPurpose
U1INA226 power monitorPackage_SO:MSOP-10_3x3mmI²C voltage/current/power sense
R15 mΩ shuntResistor_SMD:R_2512_6332MetricCurrent‑sense resistor for U1
Q1AOD403 / FQP27P06 P‑MOSFETPackage_TO_SOT_SMD:TO-252-2Load switch / reverse protection
D1ZenerDiode_SMD:D_SOD-123Gate / rail clamp
C10.1 µF 0603Capacitor_SMD:C_0603Decoupling
R4100 kΩ 0603Resistor_SMD:R_0603Bias/pull
J1JST XH 6‑pin verticalConnector_JST:...B6B-XH-AHarness to radio
J2,J3Pogo pinRadio Library:Pogo Radio Bottom 6MMPower/data contacts from battery
J4,J6Bolt padRadio Library:Bolt Pad 4.25GND / mounting bolt

The two boards face each other: the Pogo Battery 7MM contacts on Battery Top press onto the Pogo Radio Bottom 6MM contacts on Radio Bottom, carrying VBAT+, GND and DATA across the mechanical joint. The INA226 + 5 mΩ shunt measure battery current/voltage and report over the data line.


Additional parts required (beyond the BOMs)

The electronic BOM spreadsheets (*/BOM/*.xls) cover the parts placed by JLCPCB. You also need the following mechanical / assembly parts to build a working unit:

PartSpec / SourceUsed on
Battery1× — AliExpressBattery Top
O‑ring13.9 × 1.8 mmAssembly seal
Stainless‑steel printed partMetal (stainless) 3D printMechanical
Battery tabs—Battery Top
Pogo pin — Radio side, 6 mm heightAliExpressRadio Bottom (Pogo Radio Bottom 6MM)
Pogo pin — Battery side, 7 mm heightAliExpressBattery Top (Pogo Battery 7MM)

The custom footprint library (Radio Library)

Kicad Footprint Libaries/Radio Library.pretty/ is a standard KiCad .pretty footprint library — a folder of .kicad_mod files, one per footprint. It holds the non‑standard mechanical contacts that aren't in KiCad's stock libraries.

FootprintPadDrillPad ØUsed for
Pogo Battery 7MM1× THT circle1.6 mm2.5 mmPogo pin pressed from the battery side
Pogo Radio Bottom 6MM1× THT circle0.9 mm2.5 mmMating pogo target on the radio side
Bolt Pad 4.251× THT circle4.3 mm7 mmM4 mounting bolt + GND pad

Each is a single through‑hole pad — these are mechanical/contact features rather than multi‑pin parts, so the drill size is chosen to fit the specific pogo pin or bolt.

*.kicad_mod.rsls and Untitled* files in the library folder are editor scratch/temp artifacts and are not real footprints.

How the boards find the library

Each project's fp-lib-table registers the library under the nickname Radio Library via an absolute path:

text
(lib (name "Radio Library") (type "KiCad")
     (uri "/Users/.../PCB Design/Kicad Footprint Libaries/Radio Library.pretty"))

Footprints are then referenced as Radio Library:<name> (e.g. Radio Library:Pogo Battery 7MM) in the PCBs.

⚠️ The path is hard‑coded and absolute. On another machine (or if you move the repo) KiCad won't find the library and the custom footprints will show as unresolved. Fix it one of two ways:

  1. Per project — open Preferences → Manage Footprint Libraries → Project and re‑point the Radio Library row at this repo's Kicad Footprint Libaries/Radio Library.pretty, or
  2. Use a path variable — define KIPRJMOD‑relative or a custom ${RADIO_LIB} environment variable and edit each fp-lib-table to use it, so the project is portable.

Working with the project

Open in KiCad

Open the .kicad_pro inside Battery Top/Battery Top/ or Radio Bottom/Battery Bottom/. If footprints are unresolved, fix the Radio Library path as described above.

Re‑generate fabrication output

Each project has a production/ folder (gerbers zip, bom.csv, positions.csv, designators.csv) produced by the Fabrication Toolkit plugin (settings in fabrication-toolkit-options.json). Re‑run the plugin after PCB changes to refresh these, then upload the zip + BOM to JLCPCB.


Contributing

Improvements are welcome. Open an issue for anything non‑trivial, keep pull requests focused on one change, and re‑export the production/ output if you touch a PCB. See CONTRIBUTING.md for the full workflow and guidelines.

License

This project is licensed under the CERN Open Hardware Licence Version 2 – Weakly Reciprocal (CERN‑OHL‑W v2) — see LICENSE.

You are free to use, study, modify, share and manufacture these designs. Because the licence is weakly reciprocal, if you distribute modified versions of these boards you must make your modified design (source) files available under the same licence. The boards may be incorporated into a larger product without that product as a whole having to be open.

SPDX-License-Identifier: CERN-OHL-W-2.0

Notes

  • .gitignore only excludes .DS_Store. KiCad lock files (~*.lck), .history/ editor backups, and production/ outputs are currently committed — consider ignoring the first two.
  • Footprint files carry KiCad 10 (version 20260206, generator_version 10.0); open with KiCad 10 or newer to avoid format warnings.

Parts

12
QtyValueFootprintReferences
10.1µFCapacitor_SMD:C_0603_1608MetricC1
1100KResistor_SMD:R_0603_1608MetricR4
15mΩResistor_SMD:R_2512_6332MetricR1
1Conn_01x06_PinConnector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ1
1DATA_1Radio Library:Pogo Radio Bottom 6MMJ5
1D_ZenerDiode_SMD:D_SOD-123D1
1FQP27P06Package_TO_SOT_SMD:TO-252-2Q1
1GND_LRadio Library:Bolt Pad 4.25J6
1GND_RRadio Library:Bolt Pad 4.25J4
1INA226Package_SO:MSOP-10_3x3mm_P0.5mmU1
1VBAT+_1Radio Library:Pogo Radio Bottom 6MMJ3
1VBAT+_2Radio Library:Pogo Radio Bottom 6MMJ2

More from mattronix/battery-board

2
  • 2 layers39 × 70 mmBattery Cell Holder Top PCB, the printed circuit board in 3D

    Battery Cell Holder Top PCB

    mattronix/battery-board

    KiCad hardware project for the battery-to-radio interface of an AN/PRC‑152(A) reproduction radio. It contains two small PCBs that mate through spring‑loaded pogo‑pin contacts, plus a shared custom KiCad footprint…

    10 parts8CERN-OHL-W-2.0
  • 2 layers64 × 21 mmBattery Top, the printed circuit board in 3D

    Battery Top

    mattronix/battery-board

    KiCad hardware project for the battery-to-radio interface of an AN/PRC‑152(A) reproduction radio. It contains two small PCBs that mate through spring‑loaded pogo‑pin contacts, plus a shared custom KiCad footprint…

    7 parts8CERN-OHL-W-2.0

Similar boards

  • 2 layers70 × 50 mmLed light project, the printed circuit board in 3D

    Led light project

    mattwach/portable_led_lamp

    Contains firmware, schematics and 3D models for a LED lamp that can accept a wide range of voltages.

    20 parts7GPL-3.0
  • 2 layers65 × 56 mmXDoor, the printed circuit board in 3D

    XDoor

    xHain-hackspace/xDoorPiHat

    Schematics and Boardfiles for PiHat that opens and closes the xDoor

    36 parts3
  • 4 layers200 × 110 mmLTDM RevC, the printed circuit board in 3D

    LTDM RevC

    aschmidt99/LTDM_Kit_RevC

    New LTDM Code that has render.cpp

    412 parts2
  • 2 layers78 × 103 mmEmbedded.old, the printed circuit board in 3D

    Embedded.old

    borisg912/3DNA

    This project creates a flat cylindrical DNA model with: - Magnetic DNA bases with color-coded NeoPixel LEDs and unique resistor values for identification - Interactive base pairing game that validates correct DNA base…

    121 parts2GPL-3.0
  • 2 layers47.8 × 57.9 mmESP8266-LolinV3-Lamp, the printed circuit board in 3D

    ESP8266-LolinV3-Lamp

    d-diot/ESP8266-LolinV3-Lamp

    A pcb for the NodeMCU Lolin V3 board with power management for a WS2812 LED strip

    30 parts2
  • 2 layers128 × 41.5 mmWeather station ext, the printed circuit board in 3D

    Weather station ext

    rbat05/SolarWeatherStation

    Self-sustaining weather monitoring system with dual-node architecture.

    16 parts2GPL-3.0
  • 2 layers195.3 × 64.3 mmSpotwelderix, the printed circuit board in 3D

    Spotwelderix

    swifty99/Spotwelderix

    Spotwelderix

    90 parts2GPL-3.0

Questions

How big is the Radio Bottom PCB?

It measures 30 × 64 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Radio Bottom use?

12 parts, built around the FQP27P06. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Radio Bottom KiCad files?

From the mattronix/battery-board repository on GitHub, at the commit this page was made from: the board is Radio Bottom/Kicad/Radio Bottom.kicad_pcb and its schematic Battery Cell Holder/Battery Cell Holder Bottom PCB/Kicad/Battery Cell Holder Bottom PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Radio Bottom design in my own project?

Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).