Skip to the content
2 layers195.3 × 64.3 mmSpotwelderix, the printed circuit board in 3D

Spotwelderix

Size
195.3 × 64.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
90
Nets
61
Pads
387
Tracks, vias
598, 298
Pours
14
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
30 Jan 2021
Updated
10 Apr 2022

Overview

Spotwelderix is an open-source printed circuit board by swifty99, from the swifty99/Spotwelderix repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 195.3 × 64.3 mm with 90 parts on 61 nets, routed with 598 tracks and 298 vias.

It is built around the IXDD604SIA, DS18B20 and INA213AIDCKR(LX), with the IRFB7430PBF, AO3400A and RF2001NS2DTL among its other parts. Its parts include 22 resistors, 20 capacitors, 13 transistors, 8 connectors and 7 ICs. It belongs with the ESP8266 boards of this library.

Main components

9

Parts

90
QtyValueFootprintReferences
1310µCapacitor_SMD:C_1206_3216MetricC1, C2, C3, C4, C5, C5, C6, C7, C8, C9, C10, C12, C13
8IRFB7430Package_TO_SOT_SMD:TO-263-2Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8
710kResistor_SMD:R_0805_2012MetricR2, R3, R4, R7, R8, R9, R12
5100Resistor_SMD:R_0805_2012MetricR1, R2, R3, R9, R14
5MountingHole_PadMountingHole:MountingHole_5.3mm_M5_Pad_ViaH1, H3, H4, H5, H6
4100pCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C7
433kResistor_SMD:R_0805_2012MetricR6, R7, R8, R11
4MountingHoleMountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottomH1, H2, H3, H4
3AO3400APackage_TO_SOT_SMD:SOT-23Q1, Q2, Q5
3DDiode_SMD:D_SMAD2, D2, D3
222kResistor_SMD:R_0805_2012MetricR5, R6
230kResistor_SMD:R_0805_2012MetricR11, R12
2470µCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC4, C14
2IXDD604SIASamacSys_Parts:SOIC127P600X175-8NIC2, IC3
2MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH2, H7
2RF2001NS2DPackage_TO_SOT_SMD:TO-263-2_TabPin1D1, D3
1100µResistor_SMD:R_Shunt_Vishay_WSR2_WSR3R1
110nCapacitor_SMD:C_0805_2012MetricC6
130Resistor_SMD:R_0805_2012MetricR10
1300Amy_parts:ANL_FuseF1
1BC817Package_TO_SOT_SMD:SOT-23Q9
1BuzzerBuzzer_Beeper:Buzzer_15x7.5RM7.6BZ1
1CONN_01X09Connector_JST:JST_XH_B9B-XH-A_1x09_P2.50mm_VerticalP1
1ChargerPowerConnector_JST:JST_XH_S5B-XH-A_1x05_P2.50mm_HorizontalJ1
1DS18B20Package_TO_SOT_THT:TO-92_Inline_Horizontal1U1
1DisplayConnector_JST:JST_XH_S8B-XH-A_1x08_P2.50mm_HorizontalP1
1EC12D1524403 Rotary_Encoder:RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mmENC1
1ExtPwr_FAnConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ3
1FQP27P06Package_TO_SOT_THT:TO-220-3_Horizontal_TabUpQ10
1INA213AIDCKRSamacSys_Parts:SOT65P210X110-6NIC1
1Jumper_NO_SmallJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1LEDsConnector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ2
1LM4040DBZ-2.0Package_TO_SOT_SMD:SOT-23U2
1LM7805M_TO263Package_TO_SOT_SMD:TO-263-3_TabPin2U3
1NodeMCU32my_parts:ESP32_NODEMCUU1
1OnOffTastConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ1
1PowerPCBConnector_JST:JST_XH_B9B-XH-A_1x09_P2.50mm_VerticalP2
1probe-MountingHole:MountingHole_5.3mm_M5_Pad_ViaJ4

More from swifty99/Spotwelderix

3

Similar boards

  • 4 layers100 × 99.9 mmSolar Project Rev0 - Manufactured First Build, the printed circuit board in 3D

    Solar Project Rev0 - Manufactured First Build

    Phil-CIA/Solar-Project-200w

    Solar Project 200W is a prototype-first hardware and firmware effort for a 200W-class solar charging system built around a 4S LiFePO4 battery domain.

    163 parts
  • 2 layers110 × 60 mmArduino Spot Welder, the printed circuit board in 3D

    Arduino Spot Welder

    KaeptnBalu/Arduino_Spot_Welder_V3

    This is the Kicad project for V3.1 The Arduino Board was not changed, only the Mosfet Board got a updgrade.

    74 parts207GPL-3.0
  • 2 layers133 × 97.8 mmResonant Converter V1, the printed circuit board in 3D

    Resonant Converter V1

    fotherja/CLLLC_DAB

    CLLLC Dual active Bridge resonant converter v1

    193 parts6MIT
  • 2 layers310 × 100 mmAOML AB 3.0 reorganized v2, the printed circuit board in 3D

    AOML AB 3.0 reorganized v2

    cxs1529/XBT_Autolauncher_PCB

    KiCAD repository for the XBT Autolauncher board

    247 parts
  • 2 layers65 × 56 mmInterface board, the printed circuit board in 3D

    Interface board

    TrendBit/SMBR-hardware

    Design file for SMBR hardware modules in KiCAD.

    133 partsGPL-3.0
  • 2 layers100.9 × 62.4 mmWnm mk 1 rev D, the printed circuit board in 3D

    Wnm mk 1 rev D

    Fabien-Chouteau/Wee-Noise-Maker

    Open source pocket synthesizer

    128 parts37GPL-3.0
  • 4 layers76 × 100 mmChlorine revD, the printed circuit board in 3D

    Chlorine revD

    kanengomibako/Chlorine

    206 parts11Unlicense
  • 4 layers65 × 120 mmStepperControllerPCB, the printed circuit board in 3D

    StepperControllerPCB

    Hennnnnnryyyy/StepperController

    A simple handheld stepper controller

    139 parts

Questions

How big is the Spotwelderix PCB?

It measures 195.3 × 64.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Spotwelderix use?

90 parts, built around the IXDD604SIA, DS18B20, INA213AIDCKR(LX) and IRFB7430PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Spotwelderix KiCad files?

From the swifty99/Spotwelderix repository on GitHub, at the commit this page was made from: the board is PCB/combinedPCB/Spotwelderix.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Spotwelderix design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).