

Sun sensor test
Hardware design files for my $1000 CubeSat.
- Size
- 132.7 × 37.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 178
- Nets
- 105
- Pads
- 481
- Tracks, vias
- 1,529, 250
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Aug 2020
- Updated
- 3 Jan 2022
Overview
Sun sensor test is an open-source printed circuit board by rgw3d, from the rgw3d/1KCubeSat_Hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 132.7 × 37.3 mm with 178 parts on 105 nets, routed with 1,529 tracks and 250 vias.
It is built around the K857PE, ADP150AUJZ-3.3-R7 and CD74HC4067SM96. Its parts include 93 resistors, 21 connectors, 18 diodes, 11 capacitors and 7 ICs. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Main components
3K857PE
VDFN-6-EP-40℃~+110℃ 1nA 20V 60° 690nm~1050nm 840nm VDFN-6-EP Photodiodes ROHSVishay IntertechnologyPhotodiodesADP150AUJZ-3.3-R7
TSOT-5-40℃~+125℃@(Tj) 1 10uA 150mA 160mV@(150mA) 3.3V 5.5V 70dB@(10kHz) 9uVrms Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable、Thermal Shutdown TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCD74HC4067SM96
SSOP-24-208mil-55℃~+125℃ 15ns 16 16:1 2V~6V 5pF 70Ω 89MHz SSOP-24-208mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
README
sun_sensor_test/README.mdSun Sensor Test
Testing out a potential sun sensor using the K857PE 4-Quadrent Photodiode. See the pdf for more information.
See my video on this board for more information.

Parts
178| Qty | Value | Footprint | References |
|---|---|---|---|
| 49 | DNP | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R12, R13, R14, R15, R19, R20, R21, R22, R40, R46, R47, R48 +33 |
| 23 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R34, R39, R41, R42, R43, R44, R45, R54, R55, R56, R57, R58, R67, R68, R69, R70 +7 |
| 18 | RED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2 |
| 17 | 680 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17, R18, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R36, R37 +1 |
| 12 | Conn_01x04_Female | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J4, J5, J6, J7, J8, J9, J10, J11, J14, J15, J16, J17 |
| 8 | M2 Screw | MountingHole:MountingHole_2.2mm_M2_ISO7380 | H1, H2, H3, H4, H5, H6, H7, H8 |
| 8 | M3 Screw | MountingHole:MountingHole_3.2mm_M3 | H9, H10, H11, H12, H13, H14, H15, H16 |
| 8 | mousebite | footprint_custom:mousebite | H17, H18, H19, H20, H21, H23, H24, H25 |
| 7 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7 |
| 4 | K857PE | footprint_custom:K857PE | U4, U5, U6, U7 |
| 3 | TP_1.5x1.5 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1, TP2, TP3 |
| 2 | 1.27mm | Connector_PinHeader_1.27mm:PinHeader_1x01_P1.27mm_Vertical | J20, J21 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R11 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9 |
| 2 | 2.54mm | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1, J2 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11 |
| 2 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J12, J13 |
| 2 | Conn_01x05_Female | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J18, J19 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R35 |
| 1 | ADP150AUJZ-3.3-R7 | Package_TO_SOT_SMD:TSOT-23-5_HandSoldering | U3 |
| 1 | CD74HC4067SM | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U1 |
| 1 | STM32L051R8Tx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3305A | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J3 |
More from rgw3d/1KCubeSat_Hardware
2- 4 layers85 × 85 mm

- 4 layers85 × 85 mm

AVIONICS BOARD
rgw3d/1KCubeSat_Hardware
Hardware design files for my $1000 CubeSat.
181 parts158GPL-3.0
Similar boards
- 2 layers39.4 × 109.2 mm

- 2 layers100 × 100 mm

- 4 layers60 × 60 mm

AD5940 Lab
C12isme945/BioSmartSense-IoT
Portable IoT Electrochemical Biosensor & Edge AI Platform for Real-Time Water Quality & Bio-Diagnostics (Hyperbloom September Hackathon 2026)
71 parts - 4 layers48.5 × 38.3 mm

PLL ADF4159
Kevpamm/PCB-PLL-ADF4159
This git repository tracks the design and development of the PCB for a phase-locked loop (PLL) system centered around the ADF4159 IC
80 parts - 4 layers65.4 × 43 mm

- 4 layers95.9 × 90.2 mm

PCI-104-Template
marian1911/Proyecto-CUBESAT-TRANSPODER-VHF-UHF
En este repositorio se guardan todos los archivos de desarrollo referidos a el diseño y fabricacion del trasnponder VHF/UHF
128 parts - 4 layers193 × 105.2 mm

AFE V3
Pgr18/CELL_Z_SPECT_hardware
Печатные платы для проекта клеточной импедансной спектроскопии
293 parts - 2 layers65 × 70 mm

Questions
How big is the Sun sensor test PCB?
It measures 132.7 × 37.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sun sensor test use?
178 parts, built around the K857PE, ADP150AUJZ-3.3-R7 and CD74HC4067SM96. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sun sensor test KiCad files?
From the rgw3d/1KCubeSat_Hardware repository on GitHub, at the commit this page was made from: the board is sun_sensor_test/sun_sensor_test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sun sensor test design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).