4 layers96 × 70 mm
4 layers193 × 105.2 mm
Печатные платы для проекта клеточной импедансной спектроскопии
- Size
- 193 × 105.2 mm
- Copper layers
- 4
- Thickness
- 1.5 mm
- Parts
- 293
- Nets
- 382
- Pads
- 1,155
- Tracks, vias
- 2,289, 465
- Pours
- 1,015
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 May 2024
- Updated
- 18 Jun 2025
Overview
AFE V3 is an open-source printed circuit board by Pgr18, from the Pgr18/CELL_Z_SPECT_hardware repository on GitHub. It is a 4-layer board of 193 × 105.2 mm with 293 parts on 382 nets, routed with 2,289 tracks and 465 vias.
It is built around the OPA189ID, A1215S-1WR3 and B1212LS-1WR3, with the BT137S-600D-GK, TPC5160-VS2R and MAX4526EUA+ among its other parts. Its parts include 161 capacitors, 34 resistors, 19 diodes, 16 ICs and 8 connectors.
Main components
12
OPA189ID
SOIC-8-18V~-2.25V、2.25V~18V -40℃~+125℃ 1 1.7mA 140pA 14MHz 168dB 20V/us 3uV 4.5V~36V 5.2nV/√Hz@1kHz 5nV/℃ 65mA 70pA EMI filtering/RF suppression、Zero drift / auto-zero、ESD protection、Reverse-phase input protection Rail-to-rail output SOP-8 Precision Op Amps ROHSTexas InstrumentsPrecision Op AmpsA1215S-1WR3
SIP,19.7x6mmIsolated Power ModulesEVISUN
B1212LS-1WR3
SIP,19.5x6mmIsolated Power ModulesYLPTECBT137S-600D-GK
TO-252Thyristors (SCR)/ModulesGOODWORK
TPC5160-VS2R
MSOP-10-40℃~+125℃ 1 16 1LSB 4.5V~5.5V 4.8mA 600kHz 92dB Bipolar input、Multi-chip synchronization、Synchronous triggering External SAR SPI Yes MSOP-10 Analog to Digital Converters (ADC) ROHS3PEAKUncategorised
MAX4526EUA+
MSOP-8-18V~-4.5V、4.5V~36V、4.5V~18V -40℃~+85℃ 105Ω 2 2:1 MSOP-8 Analog Switches, Multiplexers ROHSMaxim Integrated (Analog Devices)Analog Switches, Multiplexers
AD5141BCPZ100-RL7
LFCSP-16(3x3)-40℃~+125℃ 1 100kΩ 2.3V~5.5V 256 35ppm/℃ 3MHz EEPROM Linear Non-volatile storage、Soft reset SPI、I2C ±8% LFCSP-16(3x3) Digital Potentiometers ROHSAnalog DevicesDigital Potentiometers
ADP150AUJZ-2.5-R7
TSOT-5-40℃~+125℃@(Tj) 1 105mV@(150mA) 10uA 150mA 2.5V 5.5V 70dB@(10kHz) 9uVrms Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsADP150AUJZ-3.3-R7
TSOT-5-40℃~+125℃@(Tj) 1 10uA 150mA 160mV@(150mA) 3.3V 5.5V 70dB@(10kHz) 9uVrms Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable、Thermal Shutdown TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsFYLS-0603UGC
-UncategorisedFORYARD
BAT43W
SOD-1231 Independent 200mA 30V 450mV@15mA 4A 500nA@25V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
README
README.mdCELL_Z_SPECT_hardware
Печатные платы для проекта клеточной импедансной спектроскопии
Parts
293| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 100n/6.3V | Capacitor_SMD:C_0402_1005Metric | C133, C139, C140, C141, C142, C143, C144, C145, C146, C147, C148, C149, C150, C151, C152, C154 +6 |
| 22 | 10uF/35V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C10, C31, C32, C35, C36, C38, C41, C43, C44, C49, C52, C57, C61, C64, C66 +6 |
| 22 | 1uF/35V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C13, C30, C33, C34, C37, C39, C40, C42, C45, C50, C51, C63, C65, C67, C68 +6 |
| 16 | 0.1uF/6.3V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16, C18, C20, C24, C26, C53, C78, C79, C123, C124, C125, C126, C127, C128, C129, C131 |
| 10 | 1uF/6.3V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C80, C81, C82, C83, C84, C85, C86, C87, C88, C89 |
| 9 | 2.2uF/10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C110, C111, C113, C115, C116, C117, C118, C119, C121 |
| 7 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8, R9, R10, R20, R35 |
| 7 | 1uF/10V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C12, C46, C47, C48 |
| 7 | 2.2uF/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C94, C95, C96, C97, C109, C114, C120 |
| 6 | 10nF/50V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C102, C103, C105, C107, C112, C122 |
| 6 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP5, JP6, JP7 |
| 5 | 10uF/6.3V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C19, C21, C25, C27 |
| 5 | FYLS-0603UGC | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D11, D14, D16, D18, D20 |
| 4 | 10uF/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C101, C104, C106, C108 |
| 4 | 1nF/35V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C58, C59, C60, C62 |
| 4 | 680 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17, R21, R36, R37 |
| 4 | 8p/50V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C134, C135, C162, C163 |
| 4 | MAX4526EUA+ | zpc-lib:SOIC127P600X175-8N | IC7, IC8, IC9, IC10 |
| 4 | OPA189ID | zpc-lib:SOIC127P600X175-8N | IC2, IC3, IC4, IC5 |
| 4 | RS3112XK-2.5 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | DA3, DA4, DA5, DA6 |
| 4 | Screw_Terminal_01x01 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | J6, J7, J8, J9 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R14 |
| 3 | 470nF/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C98, C99, C100 |
| 3 | BLM18PG330SN1D | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1, FB2, FB3 |
| 3 | LQH66SN6R8M03L | zpc-lib:IND_LQH66SN6R8M03L | L1, L2, L3 |
| 3 | NSI45020T1G | zpc-lib:SOD3716X135N | D12, D13, D15 |
| 2 | 10pF(TBD)/25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C28, C29 |
| 2 | 10uF/25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C15 |
| 2 | 11k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R23 |
| 2 | 160k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26, R32 |
| 2 | 1k/0.1% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R11 |
| 2 | 1uF/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C92, C93 |
| 2 | 2.2u/6.3V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C136, C137 |
| 2 | 4.7u/6.3V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C153, C155 |
| 2 | 4.7uF/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27, R28 |
| 2 | 7p/50V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C164, C165 |
| 2 | 8pF/50V | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C130, C132 |
| 2 | 910Ом/0.1% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R19 |
| 2 | BAT43W | Diode_SMD:D_SOD-123 | D21, D22 |
| 2 | BZX84C13 | Package_TO_SOT_SMD:SOT-23 | D1, D2 |
| 2 | CA-IS3741LW | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | D6, D8 |
| 2 | DEBUG_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4, J13 |
| 2 | FYLS-0603URC | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D17, D19 |
| 2 | KLS7-TS6606-13.0 | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1, SW2 |
| 2 | MS8551S/AD8628 | Package_TO_SOT_SMD:SOT-23-5 | DA9, DA10 |
| 2 | NX3225GD-8MHz | zpc-lib:NX3225GD | Y2, Y3 |
| 2 | TPA1286U | Package_SO:MSOP-8_3x3mm_P0.65mm | DA1, DA2 |
| 2 | TPC5160-VS2R | zpc-lib:VS2MSOP-10-A_TPK | U11, U12 |
| 2 | ~ | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP3 |
| 2 | ~ | zpc-lib:SFFF logo | HU1, HU2 |
| 1 | 0.1uF/10V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | 100n/50V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C90 |
| 1 | 100uF/50V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C91 |
| 1 | 10k | Resistor_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | 10k/DNI | Resistor_SMD:R_Array_Convex_4x0603 | RN2 |
| 1 | 10uF/10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23 |
| 1 | 110k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
| 1 | 120k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | 12k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R30 |
| 1 | 3.6k 0.1% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 820 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25 |
| 1 | A1215S-1WR3 | zpc-lib:CONV_PDM2-S24-D3-S | U3 |
| 1 | AD5141BCPZ100-RL7 | zpc-lib:QFN50P300X300X80-17N-D | IC1 |
| 1 | ADP150AUJZ-2.5-R7 | zpc-lib:SOT95P280X100-5N | IC14 |
| 1 | ADP150AUJZ-3.3-R7 | zpc-lib:SOT95P280X100-5N | IC15 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U7 |
| 1 | B1212LS-1WR3 | zpc-lib:CONV_PCN1-S5-S15-S | U4 |
| 1 | BT137S-600 | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | CA-IS3730LW | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | D5 |
| 1 | CA-IS3740LW | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | D9 |
| 1 | CA-IS3761LW | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | D7 |
| 1 | CPFC805NP-100M05 | zpc-lib:CPFC805 | FL1 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | Conn_2Rows-17Pins | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Horizontal | J1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
The 271 most common of 293 parts.
Similar boards
- 4 layers20 × 30 mm
WiFi UART Bridge v3
koggertech/Kogger_UART_WiFi_Bridge
Open-source ESP32-C3 UART to Wi-Fi bridge: firmware (ESP-IDF), KiCad 10 board, datasheet. Two UART lines relayed to UDP/TCP as whole frames, station or AP with DHCP, control over Kogger SBP, OTA with rollback.
41 parts1MIT - 2 layers198 × 278 mm
- 4 layers272 × 112 mm
- 2 layers20.2 × 46.3 mm
Tcd1304pcb
Alohom/ESP32-Compatible-TCD1304-Linear-CCD-Sensor-PCB
A custom ESP32-compatible PCB interface board to drive and read the Toshiba TCD1304 linear CCD sensor for spectrometry and optical measurement applications.
17 parts - 2 layers50.8 × 25.4 mm
- 4 layers118 × 74 mm
VFODial
PAPRST/VFODialHID
Proposal for a standard HID descriptor for radio interface device (dial, knob, keypad, ...)
96 partsMIT - 2 layers27.9 × 101.6 mm
Questions
How big is the AFE V3 PCB?
It measures 193 × 105.2 mm and has 4 copper layers, 1.5 mm thick.
What parts does the AFE V3 use?
293 parts, built around the OPA189ID, A1215S-1WR3, B1212LS-1WR3 and BT137S-600D-GK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AFE V3 KiCad files?
From the Pgr18/CELL_Z_SPECT_hardware repository on GitHub, at the commit this page was made from: the board is AFE_V3/AFE_V3.kicad_pcb and its schematic AFE_V3/AFE_V3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AFE V3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Pgr18 before reusing the design.