Skip to the content
12345

ADP150AUJZ-2.5-R7

Analog DevicesExtended

-40℃~+125℃@(Tj) 1 105mV@(150mA) 10uA 150mA 2.5V 5.5V 70dB@(10kHz) 9uVrms Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
adi/ADP150AUJZ-2.5-R7
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TSOT-5
Pins
5
In stock
40 at JLCPCB (C144257)
Used on
2 open-source boards

Overview

The ADP150AUJZ-2.5-R7 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a TSOT-5 package with 5 pins. -40℃~+125℃@(Tj) 1 105mV@(150mA) 10uA 150mA 2.5V 5.5V 70dB@(10kHz) 9uVrms Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:TSOT-23-5, from KiCad's library), ready for a KiCad board. 40 are in stock at JLCPCB (part C144257). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

IN1EN3OUT5GND2
Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUTFrom PCBKit's generic symbols

Footprint

12345
Package_TO_SOT_SMD:TSOT-23-5From KiCad's library

Pinout

5
The pins of the ADP150AUJZ-2.5-R7
PinNameType
1INPower in
2GNDPower in
3ENInput
4NCNot connected
5OUTPower out

Open-source boards using it

2
  • 4 layers96 × 70 mmTedium x8, the printed circuit board in 3D

    Tedium x8

    jboone/tedium

    TDM telephony experimentation

    283 parts3BSD-3-Clause
  • 4 layers193 × 105.2 mmAFE V3, the printed circuit board in 3D

    AFE V3

    Pgr18/CELL_Z_SPECT_hardware

    Печатные платы для проекта клеточной импедансной спектроскопии

    293 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADP150AUJZ-2.5-R7?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUT and the footprint Package_TO_SOT_SMD:TSOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP150AUJZ-2.5-R7?

TSOT-5, with 5 pins. Its footprint is drawn on this page.

Where is the ADP150AUJZ-2.5-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP150AUJZ-2.5-R7?

JLCPCB lists it as part C144257, with 40 in stock; the sellers' links on this page open their listings.

What can replace the ADP150AUJZ-2.5-R7?

Parts like it in the library: the LR8103B-T25 by LR, the ME6211C25M5G-N by MICRONE, the LP5907MFX-2.5 by Texas Instruments and the TPS72325DBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP150AUJZ-2.5-R7?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.