Skip to the content
12345

LP5907MFX-2.5

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 120mV 12uA 2.5V 250mA 5.5V 6.5uVrms 82dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Temperature Protection、Enable、Short Circuit Protection SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LP5907MFX-2.5
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
25,447 at JLCPCB (C165132)
Used on
7 open-source boards

Overview

The LP5907MFX-2.5 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 120mV 12uA 2.5V 250mA 5.5V 6.5uVrms 82dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Temperature Protection、Enable、Short Circuit Protection SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LP5907MFX-2.5, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 25,447 are in stock at JLCPCB (part C165132). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

1IN2GND3EN5OUT
Regulator_Linear:LP5907MFX-2.5From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the LP5907MFX-2.5
PinNameType
1INPower in
2GNDPower in
3ENInput
4NCNot connected
5OUTPower out

Open-source boards using it

7
  • 6 layers60.6 × 100 mmGecko5education, the printed circuit board in 3D

    Gecko5education

    logisim-evolution/GECKO5Education

    Openhardware educational platform based on the ideas of the ulx3s and Gecko4Education

    311 parts18MIT
  • 4 layers75.1 × 60.9 mmMain pcb, the printed circuit board in 3D

    Main pcb

    Xenii1642/Xii-Boy-Pocket

    Newer, Better, Thinner and Open-Source Xii-Boy

    52 parts15
  • 2 layers100 × 84 mmRadio adapter, the printed circuit board in 3D

    Radio adapter

    open-headset-interconnect-standard/radio-adapter

    An open-source OHIS Radio Adapter.

    150 parts4CC-BY-4.0
  • 4 layers150 × 50 mmTiepieLCR, the printed circuit board in 3D

    TiepieLCR

    martijnschouten/tiepielcr-hardware

    Contains the design files of the TiePieLCR multi-frequency spectrometer front-end

    241 partsGPL-3.0
  • 4 layers155.7 × 147.6 mmSBSV-16 final, the printed circuit board in 3D

    SBSV-16 final

    Soham121-935/pcb-

    141 parts
  • 2 layers49.9 × 41.2 mmVCU misc, the printed circuit board in 3D

    VCU misc

    SCFormulaElectric/USC-Electrical-Systems

    17 parts9
  • 4 layers25.4 × 41.4 mmRf switch modulino, the printed circuit board in 3D

    Rf switch modulino

    OpenAir-Lab/capstone-project

    ECE 438X Senior Design Capstone Project

    28 parts3MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP5907MFX-2.5?

Yes. The symbol is Regulator_Linear:LP5907MFX-2.5 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP5907MFX-2.5?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the LP5907MFX-2.5 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LP5907MFX-2.5?

JLCPCB lists it as part C165132, with 25,447 in stock; the sellers' links on this page open their listings.

What can replace the LP5907MFX-2.5?

Parts like it in the library: the LR8103B-T25 by LR, the ME6211C25M5G-N by MICRONE, the SPX3819M5-L-2-5 by TECH PUBLIC and the TLV73325PDBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LP5907MFX-2.5?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.