
BaseBoard
open-headset-interconnect-standard/radio-adapter
An open-source OHIS Radio Adapter.

An open-source OHIS Radio Adapter.
Radio adapter is an open-source printed circuit board by open-headset-interconnect-standard, from the open-headset-interconnect-standard/radio-adapter repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 100 × 84 mm with 150 parts on 91 nets, routed with 650 tracks and 754 vias.
It is built around the LM4808M, NJM4580L and LP5907MFX-2.5, with the LTV-217-B-G and SS34 among its other parts. Its parts include 60 capacitors, 29 resistors, 11 connectors, 5 ICs and 2 diodes. It belongs with the radio and wireless and interfaces and adapters boards of this library.
An open-source OHIS Radio Adapter.
As of 2024-07-17, this is a Work In Progress.
All KiCAD projects are in their own subdirectories off the git root. Where it makes sense to do so, an additional layer of subdirectory may be used to group several projects together more obviously.
/Documentation/ and /docs/ are reserved for documentation source, and documentation output, respectively.
Everything in /docs/ will be published on github Pages.
As of 2024-04-04, I (@SmittyHalibut, Mark Smith, N6MTS) have submitted three schematics (only!) for VERY SIMPLE radio controllers for the Big Three. A few notes about these:
As of 2024-04-25, I (still @SmittyHalibut) laid out the boards described above and had them fabricated.
As of 2024-07-17, I (still me) am chatting with @gx1400 about this. I'm going to send him some of the boards I ordered back in April and he'll help me test.
As of 2024-12-03, I (STILL me) am sending hardware to @gx1400 and a few others for testing. These tests are covering:
If you can test Yaesu GX16 or Icom RJ45, please reach out to me. @SmittyHalibut on github, or on Discord.
Electrical components, in recommended order of assembly:
Mechanical components, same as User kit:
PCBs in this repo:
Radio Specific parts, in recommended order of assembly:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | RF Choke | Inductor_SMD:L_0805_2012Metric | FB1, FB2, FB10, FB11, FB12, FB13, FB14, FB15, FB16, FB17, FB18, FB19, FB20, FB21, FB22, FB23 +13 |
| 27 | 100pF | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +11 |
| 10 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R11, R12, R13, R14, R20, R21, R22, R23 |
| 9 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6, C8, C38, C40, C45, C46, C51, C52, C55 |
| 8 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C37, C39, C49, C50, C54 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R7, R8, R10, R15, R17, R24, R26 |
| 6 | 330pF | Capacitor_SMD:C_0603_1608Metric | C35, C36, C44, C47, C59, C60 |
| 6 | 33k | Resistor_SMD:R_0603_1608Metric | R6, R9, R16, R18, R25, R27 |
| 5 | 47uF | Capacitor_SMD:C_0805_2012Metric | C5, C9, C41, C53, C56 |
| 3 | 100R | Resistor_SMD:R_0603_1608Metric | R3, R4, R19 |
| 3 | 1k | Potentiometer_SMD:Potentiometer_Bourns_3314J_Vertical | RV1, RV2, RV3 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R28, R29 |
| 2 | 470uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C26, C34 |
| 2 | CTIA/Headphones | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J7, J11 |
| 1 | +12v | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1 |
| 1 | +13.8v | Libraries:AndersonPP45-Dual | J1 |
| 1 | +2.5v | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP3 |
| 1 | +5v | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP2 |
| 1 | 0.33uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 0.5A | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C48 |
| 1 | 200mA | Fuse:Fuse_0805_2012Metric | F2 |
| 1 | 47uF | Capacitor_SMD:CP_Elec_6.3x5.8 | C7 |
| 1 | Board_Artwork | OHIS:Logo_OHIS_Medium | G1 |
| 1 | GND | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP4 |
| 1 | GX16 Riser | Libraries:Conn_B2B-RA_2.54mm_9pin_Full-Slot | J5 |
| 1 | Green LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | HP Left Transformer | Transformer_SMD:Transformer_ED8_4-Lead_10.5x8mm_P5mm | T1 |
| 1 | HP Right Transformer | Transformer_SMD:Transformer_ED8_4-Lead_10.5x8mm_P5mm | T2 |
| 1 | LM4808 | Package_SO:SOP-8_3.76x4.96mm_P1.27mm | U3 |
| 1 | LM78M05_TO252 | Package_TO_SOT_SMD:TO-252-2 | U1 |
| 1 | LP5907MFX-2.5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | LTV-217-B-G | Package_SO:SO-4_4.4x2.3mm_P1.27mm | U5 |
| 1 | Mic Pinout Config | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical_SMD | J4 |
| 1 | Mic Transformer | Transformer_SMD:Transformer_ED8_4-Lead_10.5x8mm_P5mm | T3 |
| 1 | NJM4580 | Package_SO:SOP-8_3.76x4.96mm_P1.27mm | U4 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | OHIS Radio Port | Libraries:Conn_RJ45_SMT_Amphenol-RJCSE-538X | J2 |
| 1 | Radio Headphone/Speaker Front | Libraries:Conn_3.5mm-PJ-393-8_SMT-C668609 | J8 |
| 1 | Radio Headphone/Speaker Rear | Libraries:Conn_3.5mm-PJ-393-8_SMT-C668609 | J10 |
| 1 | Radio Mic 3.5mm | Libraries:Conn_3.5mm-PJ-393-8_SMT-C668609 | J6 |
| 1 | Radio Mic RJ45 | Libraries:Conn_RJ45_SMT_Amphenol-RJCSE-538X | J3 |
| 1 | Radio PTT RCA | Libraries:Conn_RCA_Kobiconn_156-009x-E | J9 |
| 1 | SS34 | Diode_SMD:D_SMA | D1 |

open-headset-interconnect-standard/radio-adapter
An open-source OHIS Radio Adapter.

open-headset-interconnect-standard/radio-adapter
An open-source OHIS Radio Adapter.

open-headset-interconnect-standard/radio-adapter
An open-source OHIS Radio Adapter.

open-headset-interconnect-standard/radio-adapter
An open-source OHIS Radio Adapter.

open-headset-interconnect-standard/radio-adapter
An open-source OHIS Radio Adapter.

open-headset-interconnect-standard/radio-adapter
An open-source OHIS Radio Adapter.

open-headset-interconnect-standard/radio-adapter
An open-source OHIS Radio Adapter.


PacketChat/MonkeyBadge
This repository contains the hardware design files, badge code, and backend infrastructure code for the HushCon Winter 2023 badge.



logisim-evolution/GECKO5Education
Openhardware educational platform based on the ideas of the ulx3s and Gecko4Education


martijnschouten/tiepielcr-hardware
Contains the design files of the TiePieLCR multi-frequency spectrometer front-end

It measures 100 × 84 mm and has 2 copper layers, 1.6 mm thick.
150 parts, built around the LM4808M, NJM4580L, LP5907MFX-2.5 and LTV-217-B-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the open-headset-interconnect-standard/radio-adapter repository on GitHub, at the commit this page was made from: the board is v2/Main-Board/Main-Board.kicad_pcb and its schematic BaseBoard/BaseBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).