2 layers30.5 × 19 mm
2 layers50.8 × 25.4 mm
Ckt fred
IowaScaledEngineering/ckt-fredCircuit for Battery/Track Powered FRED
- Size
- 50.8 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 13
- Pads
- 54
- Tracks, vias
- 108, 33
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Aug 2024
- Updated
- 26 Sep 2024
Overview
Ckt fred is an open-source printed circuit board by IowaScaledEngineering, from the IowaScaledEngineering/ckt-fred repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50.8 × 25.4 mm with 21 parts on 13 nets, routed with 108 tracks and 33 vias.
It is built around the ATTINY13-20SSU, AP7381-33Y and BAT43W. Its parts include 5 diodes, 3 capacitors, 3 ICs, 2 resistors and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATTINY13-20SSU
SOIC-8-40℃~+85℃ 10bit 1KB 2.7V~5.5V 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AP7381-33Y
SOT-89-40℃~+125℃@(Tj) 1 150mA 1V@(100mA) 2.5uA 3.3V 40V 60dB Fixed Positive Short Circuit Protection、Thermal Shutdown SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BAT43W
SOD-1231 Independent 200mA 30V 450mV@15mA 4A 500nA@25V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
README
README.mdckt-fred
Circuit for Battery/Track Powered FRED
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CDBM140G | ISE_Generic:SOD-123T | D1, D2, D3, D4 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_4.0x4.0mm | TP1, TP2, TP3, TP4 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 68uF | Capacitor_SMD:CP_Elec_6.3x5.8 | C1 |
| 1 | AP7381-33Y | ISE_Generic:SOT-89-3 | U1 |
| 1 | ATtiny13-20SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | AVR-ISP | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J2 |
| 1 | BAT43W | ISE_Generic:SOD-123T | D5 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | DRV5032 | Package_TO_SOT_SMD:SOT-23 | U2 |
Similar boards
- 4 layers27.7 × 17.3 mm
- 2 layers50.8 × 50.8 mm
- 2 layers69.9 × 48.8 mm
- 2 layers32 × 32 mm
- 2 layers198 × 278 mm
- 4 layers272 × 112 mm
- 2 layers20.2 × 46.3 mm
Tcd1304pcb
Alohom/ESP32-Compatible-TCD1304-Linear-CCD-Sensor-PCB
A custom ESP32-compatible PCB interface board to drive and read the Toshiba TCD1304 linear CCD sensor for spectrometry and optical measurement applications.
17 parts
Questions
How big is the Ckt fred PCB?
It measures 50.8 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ckt fred use?
21 parts, built around the ATTINY13-20SSU, AP7381-33Y and BAT43W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ckt fred KiCad files?
From the IowaScaledEngineering/ckt-fred repository on GitHub, at the commit this page was made from: the board is kicad/ckt-fred/ckt-fred.kicad_pcb and its schematic kicad/ckt-fred/ckt-fred.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ckt fred design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).