Skip to the content
12345678

ATTINY13-20SSU

Microchip TechnologyExtended

-40℃~+85℃ 10bit 1KB 2.7V~5.5V 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATTINY13-20SSU
Category
Microcontrollers (MCU, MPU, SOC)
Package
SOIC-8
Pins
8
In stock
21 at JLCPCB (C1337177)
Used on
6 open-source boards

Overview

The ATTINY13-20SSU is a microcontroller made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+85℃ 10bit 1KB 2.7V~5.5V 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny13-20SS, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 21 are in stock at JLCPCB (part C1337177). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

1RESET/PB52PB33PB44GND5PB06PB17PB28VCC
MCU_Microchip_ATtiny:ATtiny13-20SSFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the ATTINY13-20SSU
PinNameType
1RESET/PB5Input/output
2PB3Input/output
3PB4Input/output
4GNDPower in
5PB0Input/output
6PB1Input/output
7PB2Input/output
8VCCPower in

Open-source boards using it

6
  • 2 layers30.5 × 19 mmSolarCanLantern, the printed circuit board in 3D

    SolarCanLantern

    HaitiSolarLightsProject/CanLanternPCB

    15 parts
  • 4 layers27.7 × 17.3 mmLdr switch, the printed circuit board in 3D

    Ldr switch

    ikatkov/ldr-switch

    Based on $0.60 Attiny13 MCU. 1kB flash, 256B ram.

    16 parts
  • 2 layers50.8 × 25.4 mmCkt fred, the printed circuit board in 3D

    Ckt fred

    IowaScaledEngineering/ckt-fred

    Circuit for Battery/Track Powered FRED

    21 partsGPL-3.0
  • 2 layers50.8 × 50.8 mmTest board, the printed circuit board in 3D

    Test board

    jacobkearin/PCB

    versioned pcb design and fab files

    11 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ATTINY13-20SSU?

Yes. The symbol is MCU_Microchip_ATtiny:ATtiny13-20SS and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATTINY13-20SSU?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the ATTINY13-20SSU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATTINY13-20SSU?

JLCPCB lists it as part C1337177, with 21 in stock; the sellers' links on this page open their listings.

What can replace the ATTINY13-20SSU?

Parts like it in the library: the ATTINY13A-SSU by Microchip Technology, the PIC12F1822-I/SN by Microchip Technology, the ATTINY202-SSN by Microchip Technology and the PIC12F675-I/SN by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATTINY13-20SSU?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.