Skip to the content
123

AP7381-33Y

Diodes IncorporatedExtended

-40℃~+125℃@(Tj) 1 150mA 1V@(100mA) 2.5uA 3.3V 40V 60dB Fixed Positive Short Circuit Protection、Thermal Shutdown SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
diodes/AP7381-33Y
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-89
Pins
3
In stock
0 at JLCPCB (C460411)
Used on
15 open-source boards

Overview

The AP7381-33Y is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Diodes Incorporated in a SOT-89 package with 3 pins. -40℃~+125℃@(Tj) 1 150mA 1V@(100mA) 2.5uA 3.3V 40V 60dB Fixed Positive Short Circuit Protection、Thermal Shutdown SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1OUT_2GND_3IN, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-89-3, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C460411). 15 open-source boards in 10 repositories on GitHub use it.

Symbol

3IN1OUT2GND
Pinmap_Generic:Regulator_Linear_1OUT_2GND_3INFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-89-3From KiCad's library

Pinout

3
The pins of the AP7381-33Y
PinNameType
1OUTPower out
2GNDPower in
3INPower in

Open-source boards using it

15See all 15
  • 2 layers50.8 × 25.4 mmCkt irsense split, the printed circuit board in 3D

    Ckt irsense split

    IowaScaledEngineering/ckt-irsense

    CKT-IRSENSE Reflective Infrared Proximity Sensor

    26 parts1
  • 2 layers38 × 100 mmNylok Heater, the printed circuit board in 3D

    Nylok Heater

    boydportfolio/Nylok-Heater

    Two-mode handheld induction-heater controller with KiCad design files, product design rendering, engineering calculations, and full cost analysis.

    68 parts
  • 2 layers50 × 50 mmPIC32, the printed circuit board in 3D

    PIC32

    Cole-Abbott/ME433

    Repo for ME 433, Cole Abbott

    23 parts
  • 2 layers50.8 × 25.4 mmCkt fred, the printed circuit board in 3D

    Ckt fred

    IowaScaledEngineering/ckt-fred

    Circuit for Battery/Track Powered FRED

    21 partsGPL-3.0
  • 2 layers127 × 76.2 mmCkt xing adv, the printed circuit board in 3D

    Ckt xing adv

    IowaScaledEngineering/ckt-xing

    Simple Model Railroad Grade Crossing Controller

    140 parts
  • 2 layers88.9 × 215.9 mmMss crossover array, the printed circuit board in 3D

    Mss crossover array

    IowaScaledEngineering/mss-crossover

    Integrated Crossover Module for Free-mo Modular Signal System

    291 parts
  • 2 layers50 × 50 mmHW4 1, the printed circuit board in 3D

    HW4 1

    sirojc/me433-advanced-mechatronics

    ME433 Advanced Mechatronics Spring 2023 @ Northwestern University

    23 parts
  • 2 layers76.3 × 12 mmCurr amp, the printed circuit board in 3D

    Curr amp

    sufst/pcb

    Monorepo for all schematics and PCB designs

    36 parts19GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AP7381-33Y?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1OUT_2GND_3IN and the footprint Package_TO_SOT_SMD:SOT-89-3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AP7381-33Y?

SOT-89, with 3 pins. Its footprint is drawn on this page.

Where is the AP7381-33Y datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the AP7381-33Y?

JLCPCB lists it as part C460411, with 0 in stock; the sellers' links on this page open their listings.

What can replace the AP7381-33Y?

Parts like it in the library: the AMS1117-3.3S by UMW, the AMS1117-3.3 by GOODWORK, the CJA1117B-3.3 by Jiangsu Changjing Electronics Technology (CJ) and the AZ1117CR-3.3TRG1 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AP7381-33Y?

15 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.