

A custom ESP32-compatible PCB interface board to drive and read the Toshiba TCD1304 linear CCD sensor for spectrometry and optical measurement applications.
- Size
- 20.2 × 46.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 29
- Pads
- 60
- Tracks, vias
- 77, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 May 2026
- Updated
- 15 May 2026
Overview
Tcd1304pcb is an open-source printed circuit board by Alohom, from the Alohom/ESP32-Compatible-TCD1304-Linear-CCD-Sensor-PCB repository on GitHub. It is a 2-layer board of 20.2 × 46.3 mm with 17 parts on 29 nets, routed with 77 tracks and 3 vias.
It is built around the AP2112K-3.3, BAT43W and MMBT2907A. Its parts include 5 capacitors, 5 resistors, 1 IC, 1 diode and 1 transistor. It belongs with the sensors and measurement boards of this library.
Main components
3AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedBAT43W
SOD-1231 Independent 200mA 30V 450mV@15mA 4A 500nA@25V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky DiodesMMBT2907A
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200MHz 250mW 400mV 5V 600mA 60V PNP SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C5 |
| 3 | 100Ω | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C3 |
| 2 | 150Ω | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | BAT43W | Diode_SMD:D_SOD-123 | D1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | MMBT2907A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | TCD1304 | Package_DIP:DIP-22_W10.16mm_Socket | TCD1304 |
Similar boards
- 2 layers198 × 278 mm

- 4 layers272 × 112 mm

- 2 layers50.8 × 25.4 mm

- 4 layers118 × 74 mm

VFODial
PAPRST/VFODialHID
Proposal for a standard HID descriptor for radio interface device (dial, knob, keypad, ...)
96 partsMIT - 4 layers193 × 105.2 mm

AFE V3
Pgr18/CELL_Z_SPECT_hardware
Печатные платы для проекта клеточной импедансной спектроскопии
293 parts - 2 layers27.9 × 101.6 mm

- 2 layers100.3 × 69.9 mm

HDD Synth Prototype MK4
MaverickUK/HDDSynth
Recreate the sound of mechanical spinning HDDs on retro PCs that use a solid state drive
46 parts16 - 4 layers350 × 155 mm

Ventilator
RespiraWorks/Ventilator
Fully-featured ICU ventilator design, optimized for manufacture using commonly available components and free to license.
788 parts169Apache-2.0
Questions
How big is the Tcd1304pcb PCB?
It measures 20.2 × 46.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tcd1304pcb use?
17 parts, built around the AP2112K-3.3, BAT43W and MMBT2907A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tcd1304pcb KiCad files?
From the Alohom/ESP32-Compatible-TCD1304-Linear-CCD-Sensor-PCB repository on GitHub, at the commit this page was made from: the board is tcd1304pcb.kicad_pcb and its schematic tcd1304pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tcd1304pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask Alohom before reusing the design.