
TRS-80-Model I G E1
RetroStack/TRS-80-Model-I-G-E1
Hardware Replica of the TRS-80 Model I Revision G

This is a Floppy Switcher for the Amiga 500/2000. It allows you to switch DF0/DF1, making it possible to boot from either a Gotek drive or the internal floppy drive. without relying on AmigaOS.
Amiga Boot Selector is an open-source printed circuit board by reinauer, from the reinauer/Amiga-Boot-Selector repository on GitHub. It is a 2-layer board of 20.6 × 57.4 mm with 7 parts on 44 nets, routed with 122 tracks and 6 vias.
It is built around the 74LS153DC. Its parts include 3 ICs, 2 resistors, 1 capacitor and 1 connector. It belongs with the retro computing and games boards of this library.
This is a Floppy Switcher for the Amiga 500/2000. It allows you to switch DF0/DF1, making it possible to boot from either a Gotek drive or the internal floppy drive. without relying on AmigaOS.
This work is a derivative of the Amiga Boot Selector by Jussi Kilpeläinen
This redesign puts the pin header for the switch to the side, reducing the footprint of the adapter. The project was mainly born out of the fact that I could not buy a ready-made version of a boot selector in the US (several European sellers bailed out on me)
Since I had to order my own PCBs anyway, I decided to optimize the design a bit for my use case.
Here's the Bill of Materials (BOM).
Big thank you goes to Jussi Kilpeläinen for the original design
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1UF | adamgreig/agg-kicad/agg.pretty:0805 | C1 |
| 1 | 10K | sparkfun/SparkFun-KiCad-Libraries/Footprints/Resistors.pretty:0805 | R1 |
| 1 | 330R | sparkfun/SparkFun-KiCad-Libraries/Footprints/Resistors.pretty:0805 | R2 |
| 1 | 74LS153 | KiCad/kicad-footprints/Package_SO.pretty:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | CIA8520 pin header | KiCad/kicad-footprints/Package_DIP.pretty:DIP-40_W15.24mm | U3 |
| 1 | CIA8520 socket | KiCad/kicad-footprints/Package_DIP.pretty:DIP-40_W15.24mm | U1 |
| 1 | Conn_01x02 | KiCad/kicad-footprints/Connector_PinHeader_2.54mm.pretty:PinHeader_1x02_P2.54mm_Horizontal | J1 |

RetroStack/TRS-80-Model-I-G-E1
Hardware Replica of the TRS-80 Model I Revision G

hkzlab/ISA_EGA_CHIPS
This board is and EGA clone based on a reversed PA-WTEGA card, based on the chipset by CHIPS (P82C435 + P82A436).

fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

clemarfolly/Microdigital-TK2000
Reprodução da PCB do TK-2000 da Microdigital, clone do Micro-Professor MPF-II


djtersteegc/Tandy-Color-Computer-Multi-Pak
Respin of the Tandy 26-3024 Multi-Pak (MPI) for the DIY builder.


It measures 20.6 × 57.4 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the 74LS153DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the reinauer/Amiga-Boot-Selector repository on GitHub, at the commit this page was made from: the board is Amiga-Boot-Selector.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask reinauer before reusing the design.