

MINISUMO CAR
Repository for the development of an autonomous 10x10 cm mini-sumo robot. It includes 3D manufacturing files, KiCad PCB routing, and source code for the ESP32.
- Size
- 85 × 44 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 30
- Pads
- 90
- Tracks, vias
- 204, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 Jul 2026
- Updated
- 30 Aug 2026
Overview
MINISUMO CAR is an open-source printed circuit board by paulmartinezcuenta, from the paulmartinezcuenta/MeKathon repository on GitHub, published under the MIT licence. It is a 2-layer board of 85 × 44 mm with 31 parts on 30 nets, routed with 204 tracks and 0 vias.
It is built around the L298N, XY-XHB2.54-4A11 and XY-XHB2.54-3A11. Its parts include 8 ICs, 6 capacitors, 1 resistor and 1 switch. It belongs with the robots and motor control boards and the ESP32 and AVR (ATmega, ATtiny) boards of this library.
Main components
3L298N
Multiwatt-15-25℃~+130℃ 2 2A 4.5V~7V Bipolar Driver Overcurrent Protection、Over temperature protection Yes Multiwatt-15 Stepper Motor Driver ROHSHGSEMIStepper Motor DriverXY-XHB2.54-4A11
插件,P=2.5mm-25℃~+85℃ 1 1x4P 2.5mm 250V 2A 4 4P 6.13mm 7.1mm Brass PA66 Through Hole Tin UL94V-0 插件,P=2.5mm Wire To Board Connector ROHSXYECONNWire To Board ConnectorXY-XHB2.54-3A11
插件,P=2.5mm-25℃~+85℃ 1 1x3P 2.5mm 250V 2A 3 3P 6.13mm 7.1mm Brass PA66 Through Hole Tin UL94V-0 插件,P=2.5mm Wire To Board Connector ROHSXYECONNWire To Board Connector
README
README.md🤖 MeKathon - Autonomous Mini Sumo 10x10
Official team repository for the development of a fully autonomous Mini Sumo robot, designed to compete under the official rules of the 10x10 cm category.
📂 Project Structure
- 📁
3D_Design/: CAD models for the chassis, front scoop, and structural components. - 📁
PCB/: Schematic design and PCB routing (KiCad). - 📁
Firmware/: C source code for control logic, sensor reading, and combat strategy implementation on the ESP32. - 📁
Docs/: Official rules, component datasheets, and architecture diagrams.
🛠️ Engineering Specifications
| Subsystem | Description |
|---|---|
| Microcontroller | ESP32 |
| Target Sensors | [Specify model, e.g., Sharp IR / LiDAR] |
| Edge Sensors | [Specify model, e.g., QTR] |
| Actuators | High-speed micro metal gearmotors |
| Power Supply | LiPo Battery [e.g., 2S 7.4V] |
👥 Development Team
- Paul - Hardware & PCB Design
- Miguel - Structural 3D Design
- Isaias - Firmware Development
- Alberto - Firmware Development
Designed for the MeKathon 2026 competition.
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | XY-XHB2.54-4A11 | EasyEDA:HDR-TH_4P-P2.50-V-F-2 | U1, U2, U3, U4 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | PH_GND | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | GND1, GND2 |
| 2 | PWM | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | PWM1, PWM2 |
| 2 | XY-XHB2.54-3A11 | EasyEDA:CONN-TH_3P-P2.50_XY-XHB2.54-3A11 | U5, U6 |
| 1 | 0.33uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 100nf | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C7 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 470uf | Capacitor_SMD:CP_Elec_10x10.5 | C4 |
| 1 | 5v | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | 5v1 |
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano | A1 |
| 1 | INA1 | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | INA1 |
| 1 | INA2 | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | INA2 |
| 1 | INB1 | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | INB1 |
| 1 | INB2 | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | INB2 |
| 1 | L298N | EasyEDA:L298N-module-43x43mm | U2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U14 |
| 1 | LOGO | images:IMG1 | THECPCENTER |
| 1 | M_VCC | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | VCC1 |
| 1 | Negative | TestPoint:TestPoint_THTPad_3.0x3.0mm_Drill1.5mm | TP3 |
| 1 | Positive | TestPoint:TestPoint_THTPad_3.0x3.0mm_Drill1.5mm | TP1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | pin_libre | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | pin_libre1 |
Similar boards
- 2 layers76.1 × 85 mm

- 4 layers85 × 54 mm

PECDR
pedro-ibs/trekking
Desenvolvimento de um robô rádio-controlado/autônomo da moralidade “tracker”
68 parts9 - 2 layers66.3 × 34.3 mm

C64PSUv3
FabioNMI/C64PSU
A low-cost, lightweight and very reliable power supply for the Commodore 64
37 parts2 - 2 layers

RoboForce
Khuzhin06/RoboForce
Тогда вы не зря зашли к нам, мы постараемся максимально подробно и быстро рассказать о нашем пути создания робота на ROS2 Jazzy и esp32,по этим материалам вы с легкостью сможете повторить этот проект.
3 parts2 - 2 layers

- 2 layers127 × 117.5 mm

Diy ert
CainPatel/diy-ert
A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.
44 parts1MIT - 2 layers99.5 × 99.5 mm

SchematicKiCadProyect
dduarteCE/Robot-vacuum
Embedded Linux robotic vacuum system built with Yocto on Raspberry Pi 4, featuring autonomous navigation, audio playback, and remote control through a web interface.
42 parts1MIT - 2 layers62.3 × 42.9 mm

Questions
How big is the MINISUMO CAR PCB?
It measures 85 × 44 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MINISUMO CAR use?
31 parts, built around the L298N, XY-XHB2.54-4A11 and XY-XHB2.54-3A11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MINISUMO CAR KiCad files?
From the paulmartinezcuenta/MeKathon repository on GitHub, at the commit this page was made from: the board is PCB/MINISUMO_CAR/MINISUMO_CAR.kicad_pcb and its schematic PCB/MINISUMO_CAR/MINISUMO_CAR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MINISUMO CAR design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).