Skip to the content
2 layers62.3 × 42.9 mmL298N, the printed circuit board in 3D

L298N (schematic and layout)

Size
62.3 × 42.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
15
Pads
66
Tracks, vias
137, 5
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
15 Mar 2025
Updated
16 Mar 2025

Overview

L298N is an open-source printed circuit board by engnourmo, from the engnourmo/L298N-PCB- repository on GitHub. It is a 2-layer board of 62.3 × 42.9 mm with 27 parts on 15 nets, routed with 137 tracks and 5 vias.

It is built around the L298N. Its parts include 9 diodes, 7 connectors, 2 capacitors, 2 ICs and 1 resistor.

Main components

1

Parts

27
QtyValueFootprintReferences
8DDiode_SMD:D_PowerDI-123D2, D3, D4, D5, D6, D7, D8, D9
3MountingHoleMountingHole:MountingHole_2.2mm_M2_DIN965_PadH1, H2, H3
2C_PolarizedCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1, C2
15V enable jumperConnector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_VerticalJ1
1Conn_01x04_PinConnector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_VerticalJ5
1EnableAConnector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_VerticalJ3
1EnableBConnector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_VerticalJ4
1Heatsinkheat sink:HSINK_SK_95_25_STS_TO_220HS1
1L298NL298N:TO127P2020X500X2100-15U2
1LEDLED_SMD:LED_0201_0603MetricD1
1LM7805_TO220voltage_regulator:TO254P1524X483-4NU1
1LOGOlogos:ElectronicsG***
1LOGOlogos:eagleG***
1Motor1TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ6
1Motor2TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ7
1RResistor_SMD:R_0402_1005MetricR1
1Screw_Terminal_01x03TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_HorizontalJ2

Similar boards

  • 2 layers76.1 × 85 mmFlypi, the printed circuit board in 3D

    Flypi

    amchagas/Flypi

    This is the repository for the flypi project

    45 parts88GPL-2.0
  • 4 layers85 × 54 mmPECDR, the printed circuit board in 3D

    PECDR

    pedro-ibs/trekking

    Desenvolvimento de um robô rádio-controlado/autônomo da moralidade “tracker”

    68 parts9
  • 2 layers66.3 × 34.3 mmC64PSUv3, the printed circuit board in 3D

    C64PSUv3

    FabioNMI/C64PSU

    A low-cost, lightweight and very reliable power supply for the Commodore 64

    37 parts2
  • 2 layersRoboForce, the printed circuit board in 3D

    RoboForce

    Khuzhin06/RoboForce

    Тогда вы не зря зашли к нам, мы постараемся максимально подробно и быстро рассказать о нашем пути создания робота на ROS2 Jazzy и esp32,по этим материалам вы с легкостью сможете повторить этот проект.

    3 parts2
  • 2 layersRP2040 minimal, the printed circuit board in 3D

    RP2040 minimal

    ltherreraro/Wally

    Recolector de basura espacios cerrados usando esp32

    58 parts2
  • 2 layers127 × 117.5 mmDiy ert, the printed circuit board in 3D

    Diy ert

    CainPatel/diy-ert

    A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.

    44 parts1MIT
  • 2 layers99.5 × 99.5 mmSchematicKiCadProyect, the printed circuit board in 3D

    SchematicKiCadProyect

    dduarteCE/Robot-vacuum

    Embedded Linux robotic vacuum system built with Yocto on Raspberry Pi 4, featuring autonomous navigation, audio playback, and remote control through a web interface.

    42 parts1MIT
  • 2 layers65 × 43.5 mmL298N DRIVER, the printed circuit board in 3D

    L298N DRIVER

    hornet0018/L298N-DRIVER

    23 parts1

Questions

How big is the L298N PCB?

It measures 62.3 × 42.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the L298N use?

27 parts, built around the L298N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the L298N KiCad files?

From the engnourmo/L298N-PCB- repository on GitHub, at the commit this page was made from: the board is L298N.kicad_pcb and its schematic L298N.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the L298N design in my own project?

Its repository states no licence, so its author keeps all rights: ask engnourmo before reusing the design.