Boards by oxidecomputer

16 boards

Open-source boards designed in KiCad by oxidecomputer on GitHub, from 10 repositories. A board’s address here is its repository’s there.

6 layers150 × 105 mm
Gimlet mgmt bringup
oxidecomputer/hw-gimletlet
More full-featured breakout board for the STM32H7, including many expansion headers for daughter boards. In active use for Hubris development and as a Swiss Army Knife around the lab
322 parts4MPL-2.0
4 layers187.2 × 112 mm
Gemini bringup
oxidecomputer/gemini-bringup
EDA work for the Gemini bringup vehicle
283 parts2MPL-2.0
4 layers143.5 × 43.2 mm
Ignitionlet
oxidecomputer/hw-ignitionlet
Breakout board for the ice40 FPGA with SPI PMOD interface
142 parts2MPL-2.0
4 layers14 × 34.5 mm
Samtec dbg 8pin sfm
oxidecomputer/hw-samtec-dbg
Allows for conversion between SFM-105-02-X-DH-XX, TFC-105-02-F-D-A-K, and a 2x5 0.1" header.
4 parts2MPL-2.0
2 layers75 × 20 mm
Spimux
oxidecomputer/hw-spimux
PMOD Quad SPI flash mux debug board
23 parts2MPL-2.0
2 layers204 × 20 mm
Dimmlet
oxidecomputer/hw-dimmlet
Breaks out I2C connections to 2x DIMM sockets.
23 parts1MPL-2.0
4 layers51.4 × 37.1 mm
Lpc55 carrier
oxidecomputer/hw-lpc55-carrier
Daughterboard which plugs into the Gemini Bringup Board (and gimletlet's carrier-carrier) and provides an LPC55 (root of trust microcontroller)
58 parts1MPL-2.0
4 layers219 × 117.4 mm
Panel
oxidecomputer/hardware-adafruit-ignition-adapter
Programming Adapter for using Adafruit FT232H and iceprog
202 partsMPL-2.0
4 layers70.8 × 66.5 mm
Nic2
oxidecomputer/hw-gimletlet-nic
Daughterboard for the Gimletlet 2 which uses a KSZ8463 to break out two ethernet (RJ-45) connectors. In active use for Hubris development.
53 partsMPL-2.0
6 layers188 × 66.8 mm
U2CEM
oxidecomputer/hw-k2
This design provides a PCIe extender that converts from a U.2 PCIe device connector and provides a x4 PCIe CEM slot.
24 partsMPL-2.0
4 layers99.7 × 103.5 mm
Gimletlet
oxidecomputer/hw-gimletlet
More full-featured breakout board for the STM32H7, including many expansion headers for daughter boards. In active use for Hubris development and as a Swiss Army Knife around the lab
131 parts4MPL-2.0
4 layers58 × 57 mm
Gimletlet
oxidecomputer/hw-gimletlet
More full-featured breakout board for the STM32H7, including many expansion headers for daughter boards. In active use for Hubris development and as a Swiss Army Knife around the lab
59 parts4MPL-2.0
4 layers53.3 × 31.8 mm
Lvds sma adapter
oxidecomputer/hw-ignitionlet
Breakout board for the ice40 FPGA with SPI PMOD interface
18 parts2MPL-2.0
4 layers14 × 40 mm
Samtec dbg
oxidecomputer/hw-samtec-dbg
Allows for conversion between SFM-105-02-X-DH-XX, TFC-105-02-F-D-A-K, and a 2x5 0.1" header.
4 parts2MPL-2.0
4 layers55 × 79 mm
Gimletlet lpc55-adapter
oxidecomputer/hw-lpc55-carrier
Daughterboard which plugs into the Gemini Bringup Board (and gimletlet's carrier-carrier) and provides an LPC55 (root of trust microcontroller)
39 parts1MPL-2.0
4 layers48.3 × 22.9 mm
Ignition adafruit ft232h rD adapter
oxidecomputer/hardware-adafruit-ignition-adapter
Programming Adapter for using Adafruit FT232H and iceprog
12 partsMPL-2.0