
Gimletlet lpc55-adapter
oxidecomputer/hw-lpc55-carrier
Daughterboard which plugs into the Gemini Bringup Board (and gimletlet's carrier-carrier) and provides an LPC55 (root of trust microcontroller)

Daughterboard which plugs into the Gemini Bringup Board (and gimletlet's carrier-carrier) and provides an LPC55 (root of trust microcontroller)
Lpc55 carrier is an open-source printed circuit board by oxidecomputer, from the oxidecomputer/hw-lpc55-carrier repository on GitHub, published under the MPL-2.0 licence. It is a 4-layer board of 51.4 × 37.1 mm with 58 parts on 42 nets, routed with 2,295 tracks and 91 vias.
It is built around the LPC55S28JBD64. Its parts include 25 capacitors, 6 resistors, 2 crystals, 1 IC and 1 diode. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Daughterboard which plugs into the Gemini Bringup Board (and gimletlet's carrier-carrier) and provides an LPC55 (root of trust microcontroller)

In order to interface with a gimletlet, the LPC55Carrier-Carrier

| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF 3.3VDCbias | Capacitor_SMD:C_0603_1608Metric | C102, C104, C106, C108, C115, C118 |
| 6 | 10000pF 3.3VDCbias | Capacitor_SMD:C_0603_1608Metric | C103, C105, C107, C109, C116, C125 |
| 5 | 22R | Resistor_SMD:R_0603_1608Metric | R101, R104, R108, R109, R110 |
| 4 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP101, JP102, JP103, JP104 |
| 2 | 22pF 3.3VAC | Capacitor_SMD:C_0603_1608Metric | C123, C124 |
| 2 | 33pF 1.2VAC | Capacitor_SMD:C_0603_1608Metric | C121, C122 |
| 2 | 4.7uF 3.3VDCbias | Capacitor_SMD:C_0805_2012Metric | C101, C113 |
| 2 | 47pF 3.3VDCbias | Capacitor_SMD:C_0603_1608Metric | C114, C119 |
| 2 | 600R @ 100MHz 10mA | Inductor_SMD:L_0603_1608Metric | FB101, FB102 |
| 2 | M3 | MountingHole:MountingHole_3.2mm_M3 | H101, H102 |
| 1 | 0.1uF 1.2VDCbias | Capacitor_SMD:C_0603_1608Metric | C111 |
| 1 | 1.25Vf 150mA | Diode_SMD:D_SOD-323 | D103 |
| 1 | 100kR | Resistor_SMD:R_0603_1608Metric | R103 |
| 1 | 16MHz 18pF | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y101 |
| 1 | 2.2uF 1.2VDCbias | Capacitor_SMD:C_0805_2012Metric | C112 |
| 1 | 22uF 1.2VDCbias | Capacitor_SMD:C_1210_3225Metric | C120 |
| 1 | 22uF 3.3VDCbias | Capacitor_SMD:C_1210_3225Metric | C117 |
| 1 | 32.768kHz 12.5pF | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y102 |
| 1 | 4.7uH 400mA 290mR | Inductor_SMD:L_0805_2012Metric | L101 |
| 1 | 47pF 1.2VDCbias | Capacitor_SMD:C_0603_1608Metric | C110 |
| 1 | 913-00002 | grumpy:Oxide_Board_Identifier_18x5mm | G*** |
| 1 | Conn_2Rows-51Pins | hirose-df9:Hirose_DF9-51S-1V(69)_2Rows_51Pin-2MP_P1.0mm_Vertical | J101 |
| 1 | GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP101 |
| 1 | ISP0 | TestPoint:TestPoint_Pad_D2.0mm | TP108 |
| 1 | LOGO | grumpy:logo-4mm-mask | G*** |
| 1 | LPC55S28JBD64 | lpc55:HTQFP-64-1EP_10x10mm_P0.5mm_EP3.6x3.6mm | U101 |
| 1 | SWO | TestPoint:TestPoint_Pad_D2.0mm | TP109 |
| 1 | VDD | TestPoint:TestPoint_Pad_D2.0mm | TP102 |
| 1 | VDDA | TestPoint:TestPoint_Pad_D2.0mm | TP104 |
| 1 | VDD_PMU | TestPoint:TestPoint_Pad_D2.0mm | TP105 |
| 1 | XTAL_32M | test-point:TestPoint_2Pads_Pitch8mm_D2.0mm | TP106 |
| 1 | XTAL_RTC | test-point:TestPoint_2Pads_Pitch8mm_D2.0mm | TP103 |
| 1 | ~{RESET} | TestPoint:TestPoint_Pad_D2.0mm | TP107 |
The 56 most common of 58 parts.

oxidecomputer/hw-lpc55-carrier
Daughterboard which plugs into the Gemini Bringup Board (and gimletlet's carrier-carrier) and provides an LPC55 (root of trust microcontroller)

mimok/yast-hw
Hardware source files of the YAST security token from OTS Security

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.


Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

will127534/Miniature-CM4-Cluster
A dense cluster for four Raspberry Pi Compute Module 4


ricardoquesada/unijoysticle2
Bluetooth gamepad support for the Commodore 64 / Atari / Amiga, etc.
It measures 51.4 × 37.1 mm and has 4 copper layers, 1.6 mm thick.
58 parts, built around the LPC55S28JBD64. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the oxidecomputer/hw-lpc55-carrier repository on GitHub, at the commit this page was made from: the board is lpc55_carrier.kicad_pcb and its schematic gimletlet-lpc55-adapter/gimletlet-lpc55-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).