2 layers88.9 × 81.3 mm
2 layers88.9 × 81.3 mm
Panel-1013
openpinballproject/opp2Open pinball project firmware
- Size
- 88.9 × 81.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 136
- Nets
- 16
- Pads
- 408
- Tracks, vias
- 1,088, 0
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 Dec 2025
- Updated
- 9 May 2026
Overview
Panel-1013 is an open-source printed circuit board by openpinballproject, from the openpinballproject/opp repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 88.9 × 81.3 mm with 136 parts on 16 nets, routed with 1,088 tracks and 0 vias.
Its parts include 56 connectors, 40 resistors and 32 transistors.
Parts
136| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 100K | R1 | R2, R2, R2, R2, R2, R2, R2, R2, R3, R3, R3, R3, R3, R3, R3, R3 +16 |
| 32 | MOSFET_N | 00_to220_vert_gds | Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q2, Q2, Q2, Q2, Q2, Q2, Q2, Q2 +16 |
| 16 | CONN_4 | SIL-4 | P2, P2, P2, P2, P2, P2, P2, P2, P3, P3, P3, P3, P3, P3, P3, P3 |
| 8 | 0 | R1 | R1, R1, R1, R1, R1, R1, R1, R1 |
| 8 | CONN2X3MOLEX | 00_th2x3x4.2mm_cheap | P4, P4, P4, P4, P4, P4, P4, P4 |
| 8 | CONN_4 | 00_th1x4x100-lock | P5, P5, P5, P5, P5, P5, P5, P5 |
| 8 | CONN_8 | SIL-8 | P6, P6, P6, P6, P6, P6, P6, P6 |
| 8 | REF | opp_logo_backsilk | VAL, VAL, VAL, VAL, VAL, VAL, VAL, VAL |
| 8 | SPADE_187 | 00_th1x2x200 | P10, P10, P10, P10, P10, P10, P10, P10 |
| 8 | TST | 00_mtg_hole-2-56 | P1, P1, P1, P1, P1, P1, P1, P1 |
Questions
How big is the Panel-1013 PCB?
It measures 88.9 × 81.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panel-1013 use?
136 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel-1013 KiCad files?
From the openpinballproject/opp repository on GitHub, at the commit this page was made from: the board is Kicad/Panel-1013/Panel-1013.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel-1013 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from openpinballproject/opp
12- 2 layers88.9 × 81.3 mm
- 2 layers86.4 × 91.4 mm
- 2 layers100 × 65 mm
- 2 layers100 × 65 mm
- 2 layers100 × 100 mm
- 2 layers44.4 × 20.3 mm
- 2 layers50 × 65 mm
- 2 layers50 × 65 mm
- 2 layers100 × 100 mm
- 2 layers50 × 100 mm
- 2 layers44.4 × 20.3 mm
Similar boards
- 2 layers150.5 × 48 mm
Battery bus
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
136 parts915 - 2 layers59.6 × 109.5 mm
Kivu12
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
136 parts410 - 2 layers227 × 77 mm
Keyboard pykey40-lite
rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware
136 parts236 - 2 layers415.5 × 73 mm
Keyboard
Spaceboards/SpaceboardsHardware
A collection of open source hardware that has been designed by Spaceboards
136 parts144CERN-OHL-W-2.0 - 2 layers309.4 × 145.3 mm
- 2 layers
Small-10
NVlabs/Cypress
Cypress is a scalable, GPU-accelerated PCB placement method inspired by VLSI. It incorporates tailored cost functions, constraint handling, and optimized techniques adapted for PCB layouts.
136 parts56Apache-2.0 - 2 layers120 × 66 mm
Io daughterboard
kbob/MinimumViableSynth
A virtual analog synthesizer with lots of knobs and buttons.
136 parts28GPL-3.0 - 2 layers257.2 × 89.2 mm
Bully files
zhol0777/bully-files
Bully is a keyboard designed by paaradiso keyboard design and zhol. It combines low typing angle, a plateless build, and modest but dignified design sensibilities.
136 parts26