Skip to the content
2 layers50 × 65 mm1020-IncandPlankG2, the printed circuit board in 3D

1020-IncandPlankG2

openpinballproject/opp2

Open pinball project firmware

Size
50 × 65 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
51
Pads
122
Tracks, vias
193, 2
Pours
3
Routed
Yes
KiCad
KiCad 4
Created
27 Dec 2025
Updated
9 May 2026

Overview

1020-IncandPlankG2 is an open-source printed circuit board by openpinballproject, from the openpinballproject/opp repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50 × 65 mm with 33 parts on 51 nets, routed with 193 tracks and 2 vias.

Its parts include 16 transistors, 12 connectors and 4 resistors.

Parts

33
QtyValueFootprintReferences
16MOSFET_Ncommonlib:00_to92_dgsQ1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16
4TSTcommonlib:00_mtg_hole-2-56P4, P5, P6, P7
20Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_VerticalR1, R4
2480Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_VerticalR2, R3
2CONN_4X2Pin_Headers:Pin_Header_Straight_2x04_Pitch2.54mmP1, P2
2CONN_8commonlib:00_th1x8x100-lockP8, P9
1CONN_2commonlib:00_th1x2x4.2mm_cheapP10
1CONN_4commonlib:00_th1x4x100-lockP3
1Conn_01x22Pin_Headers:Pin_Header_Straight_1x22_Pitch2.54mmJ1
1REFopp_logo_backsilk:opp_logo_backsilkVAL
1SPADE_187commonlib:00_th1x2x200P11

More from openpinballproject/opp

12
  • 2 layers88.9 × 81.3 mmPanel-1017, the printed circuit board in 3D

    Panel-1017

    openpinballproject/opp

    Open pinball project firmware

    320 parts2GPL-3.0
  • 2 layers88.9 × 81.3 mmPanel-1014, the printed circuit board in 3D

    Panel-1014

    openpinballproject/opp

    Open pinball project firmware

    192 parts2GPL-3.0
  • 2 layers86.4 × 91.4 mmPanel-1016, the printed circuit board in 3D

    Panel-1016

    openpinballproject/opp

    Open pinball project firmware

    156 parts2GPL-3.0
  • 2 layers88.9 × 81.3 mmPanel-1013, the printed circuit board in 3D

    Panel-1013

    openpinballproject/opp

    Open pinball project firmware

    136 parts2GPL-3.0
  • 2 layers100 × 65 mmPanel-1020, the printed circuit board in 3D

    Panel-1020

    openpinballproject/opp

    Open pinball project firmware

    66 parts2GPL-3.0
  • 2 layers100 × 65 mmPanel-1019, the printed circuit board in 3D

    Panel-1019

    openpinballproject/opp

    Open pinball project firmware

    64 parts2GPL-3.0
  • 2 layers100 × 100 mmPanel-1018, the printed circuit board in 3D

    Panel-1018

    openpinballproject/opp

    Open pinball project firmware

    60 parts2GPL-3.0
  • 2 layers44.4 × 20.3 mm1017-IncandSMG2, the printed circuit board in 3D

    1017-IncandSMG2

    openpinballproject/opp

    Open pinball project firmware

    40 parts2GPL-3.0
  • 2 layers50 × 65 mm1019-SolPlankG2, the printed circuit board in 3D

    1019-SolPlankG2

    openpinballproject/opp

    Open pinball project firmware

    32 parts2GPL-3.0
  • 2 layers100 × 100 mm1009-MaxPwr, the printed circuit board in 3D

    1009-MaxPwr

    openpinballproject/opp

    Open pinball project firmware

    31 parts2GPL-3.0
  • 2 layers50 × 100 mm1018-PwrFilter, the printed circuit board in 3D

    1018-PwrFilter

    openpinballproject/opp

    Open pinball project firmware

    30 parts2GPL-3.0
  • 2 layers44.4 × 20.3 mm1014-IncandBrdG2, the printed circuit board in 3D

    1014-IncandBrdG2

    openpinballproject/opp

    Open pinball project firmware

    24 parts2GPL-3.0

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    33 parts1kGPL-3.0
  • 2 layers127 × 96 mmAmiga gfxcard, the printed circuit board in 3D

    Amiga gfxcard

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    33 parts1k
  • 2 layers92.7 × 58.4 mmHacky holidays, the printed circuit board in 3D

    Hacky holidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    33 parts915
  • 2 layers240 × 120 mmQuiver PDB 01, the printed circuit board in 3D

    Quiver PDB 01

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    33 parts617CERN-OHL-S-2.0
  • 2 layers75 × 26 mmDIY detector, the printed circuit board in 3D

    DIY detector

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    33 parts558BSD-2-Clause
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    33 parts447MIT
  • 2 layers65 × 30 mmCanHat, the printed circuit board in 3D

    CanHat

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    33 parts373GPL-3.0

Questions

How big is the 1020-IncandPlankG2 PCB?

It measures 50 × 65 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 1020-IncandPlankG2 use?

33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 1020-IncandPlankG2 KiCad files?

From the openpinballproject/opp repository on GitHub, at the commit this page was made from: the board is Kicad/1020-IncandPlankG2/1020.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the 1020-IncandPlankG2 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).