2 layers88.9 × 81.3 mm
2 layers100 × 100 mm
1009-MaxPwr
openpinballproject/opp2Open pinball project firmware
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 19
- Pads
- 202
- Tracks, vias
- 44, 1
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 27 Dec 2025
- Updated
- 9 May 2026
Overview
1009-MaxPwr is an open-source printed circuit board by openpinballproject, from the openpinballproject/opp repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 31 parts on 19 nets, routed with 44 tracks and 1 via.
Its parts include 28 connectors and 3 resistors.
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | SPADE_187 | 00_th1x2x200 | P1, P2, P3, P4, P5, P6, P9, P10, P14, P18, P22 |
| 4 | CONN2X12PCPWR | 00_th2x12x4.2mm | P8, P13, P17, P21 |
| 4 | CONN2X3PCP6MB | 00_th2x3x4.2mm | P7, P12, P16, P20 |
| 4 | CONN_2 | 00_th1x2x100-lock | P11, P15, P19, P23 |
| 4 | TST | 00_mtg_hole-2-56 | P25, P26, P27, P28 |
| 3 | 100K | R1 | R1, R2, R3 |
| 1 | CONN2X12 | 00_th2x12x4.2mm | P24 |
More from openpinballproject/opp
12- 2 layers88.9 × 81.3 mm
- 2 layers86.4 × 91.4 mm
- 2 layers88.9 × 81.3 mm
- 2 layers100 × 65 mm
- 2 layers100 × 65 mm
- 2 layers100 × 100 mm
- 2 layers44.4 × 20.3 mm
- 2 layers50 × 65 mm
- 2 layers50 × 65 mm
- 2 layers50 × 100 mm
- 2 layers44.4 × 20.3 mm
Similar boards
- 2 layers44.5 × 46.9 mm
OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
31 parts2.1k - 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
31 parts1kGPL-3.0 - 2 layers191 × 98.5 mm
MacroKeypad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
31 parts915 - 2 layers39 × 45.2 mm
CH32V003F4P6-R0-1v1
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
31 parts599 - 2 layers26.7 × 27.9 mm
Breakout board
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
31 parts546MIT - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
31 parts447MIT - 2 layers77.2 × 69.8 mm
- 2 layers103 × 55 mm
Questions
How big is the 1009-MaxPwr PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 1009-MaxPwr use?
31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 1009-MaxPwr KiCad files?
From the openpinballproject/opp repository on GitHub, at the commit this page was made from: the board is Kicad/1009-MaxPwr/1009.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 1009-MaxPwr design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).