2 layers88.9 × 81.3 mm
2 layers100 × 100 mm
Panel-1018
openpinballproject/opp2Open pinball project firmware
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 14
- Pads
- 136
- Tracks, vias
- 140, 6
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 Dec 2025
- Updated
- 9 May 2026
Overview
Panel-1018 is an open-source printed circuit board by openpinballproject, from the openpinballproject/opp repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 60 parts on 14 nets, routed with 140 tracks and 6 vias.
Its parts include 24 connectors, 16 resistors, 6 capacitors, 4 diodes and 4 transistors.
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100K | R1 | R1, R1, R2, R2, R3, R3, R6, R6, R7, R7, R8, R8 |
| 8 | TST | 00_mtg_hole-18awg | P4, P4, P7, P7, P15, P15, P16, P16 |
| 8 | TST | 00_mtg_hole-2-56 | P11, P11, P12, P12, P13, P13, P14, P14 |
| 6 | CONN2X3MOLEX | 00_th2x3x4.2mm_cheap | P1, P1, P8, P8, P9, P9 |
| 6 | CP1 | 00_c10mm_3.5cm | C1, C1, C2, C2, C3, C3 |
| 4 | 900K | R1 | R4, R4, R5, R5 |
| 4 | LED | 00_led-5mm | D1, D1, D2, D2 |
| 4 | MOSFET_P | 00_to220_vert_gds | Q1, Q1, Q2, Q2 |
| 4 | THERMISTOR | 00_th1x2x310 | TH1, TH1, TH2, TH2 |
| 2 | CONN_6 | 00_th1x6x100-lock | P10, P10 |
| 2 | REF | opp_logo_backsilk | VAL, VAL |
Questions
How big is the Panel-1018 PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panel-1018 use?
60 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel-1018 KiCad files?
From the openpinballproject/opp repository on GitHub, at the commit this page was made from: the board is Kicad/Panel-1018/Panel-1018.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel-1018 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from openpinballproject/opp
12- 2 layers88.9 × 81.3 mm
- 2 layers86.4 × 91.4 mm
- 2 layers88.9 × 81.3 mm
- 2 layers100 × 65 mm
- 2 layers100 × 65 mm
- 2 layers44.4 × 20.3 mm
- 2 layers50 × 65 mm
- 2 layers50 × 65 mm
- 2 layers100 × 100 mm
- 2 layers50 × 100 mm
- 2 layers44.4 × 20.3 mm
Similar boards
- 2 layers35 × 50 mm
- 2 layers32.9 × 119.1 mm
- 2 layers35.9 × 62.7 mm
Rp2040-memcard
sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.
60 parts241 - 2 layers58 × 110 mm
- 2 layers52 × 90 mm
- 2 layers42.5 × 80 mm
- 2 layers57.4 × 12 mm
- 2 layers87.9 × 123.9 mm
Bitdoglab
BitDogLab/BitDogLab
Open-source educational hardware for embedded systems, programming, electronics, and physical computing.
60 parts203