

Panel-1020
Open pinball project firmware
- Size
- 100 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 51
- Pads
- 244
- Tracks, vias
- 386, 4
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 Dec 2025
- Updated
- 9 May 2026
Overview
Panel-1020 is an open-source printed circuit board by openpinballproject, from the openpinballproject/opp repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 65 mm with 66 parts on 51 nets, routed with 386 tracks and 4 vias.
Its parts include 32 transistors, 24 connectors and 8 resistors.
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | MOSFET_N | commonlib:00_to92_dgs | Q1, Q1, Q10, Q10, Q11, Q11, Q12, Q12, Q13, Q13, Q14, Q14, Q15, Q15, Q16, Q16 +16 |
| 8 | TST | commonlib:00_mtg_hole-2-56 | P4, P4, P5, P5, P6, P6, P7, P7 |
| 4 | 0 | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R1, R1, R4, R4 |
| 4 | 480 | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R2, R2, R3, R3 |
| 4 | CONN_4X2 | Pin_Headers:Pin_Header_Straight_2x04_Pitch2.54mm | P1, P1, P2, P2 |
| 4 | CONN_8 | commonlib:00_th1x8x100-lock | P8, P8, P9, P9 |
| 2 | CONN_2 | commonlib:00_th1x2x4.2mm_cheap | P10, P10 |
| 2 | CONN_4 | commonlib:00_th1x4x100-lock | P3, P3 |
| 2 | Conn_01x22 | Pin_Headers:Pin_Header_Straight_1x22_Pitch2.54mm | J1, J1 |
| 2 | REF | opp_logo_backsilk:opp_logo_backsilk | VAL, VAL |
| 2 | SPADE_187 | commonlib:00_th1x2x200 | P11, P11 |
More from openpinballproject/opp
12- 2 layers88.9 × 81.3 mm

- 2 layers88.9 × 81.3 mm

- 2 layers86.4 × 91.4 mm

- 2 layers88.9 × 81.3 mm

- 2 layers100 × 65 mm

- 2 layers100 × 100 mm

- 2 layers44.4 × 20.3 mm

- 2 layers50 × 65 mm

- 2 layers50 × 65 mm

- 2 layers100 × 100 mm

- 2 layers50 × 100 mm

- 2 layers44.4 × 20.3 mm

Similar boards
- 2 layers126.5 × 83 mm

Pcb pro controller
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
66 parts915 - 2 layers94.6 × 46.1 mm

- 2 layers56.9 × 35.2 mm

- 2 layers82 × 120 mm

Sample Numeric Keyboard
famichu/MagLev_Switch_MX
The 3D printable magnetic levitation contactless switch with the linear output hall effect sensor.
66 parts467 - 2 layers136.8 × 98.6 mm

Hillside
mmccoyd/hillside
Family of split ergonomic keyboards with three rows of six or five keys and a generous thumb arc
66 parts448MIT - 2 layers115.7 × 95.7 mm

- 2 layers95.2 × 57.2 mm

- 2 layers96.5 × 66 mm

BumperDuino
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
66 parts282
Questions
How big is the Panel-1020 PCB?
It measures 100 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panel-1020 use?
66 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel-1020 KiCad files?
From the openpinballproject/opp repository on GitHub, at the commit this page was made from: the board is Kicad/Panel-1020/Panel-1020.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel-1020 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).