

VR8-ACC PCB
- Size
- 140 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 47
- Pads
- 173
- Tracks, vias
- 281, 9
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 Jan 2026
- Updated
- 15 Aug 2026
Overview
VR8-ACC PCB is an open-source printed circuit board by NYCUVRC, from the NYCUVRC/VR8-ACC-PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 140 × 60 mm with 63 parts on 47 nets, routed with 281 tracks and 9 vias.
It is built around the SPU01M-12, VO14642AT and KT12-1A-40L-THT, with the LM393P and NE555P among its other parts. Its parts include 22 resistors, 11 diodes, 7 connectors, 5 ICs and 3 transistors.
Main components
5SPU01M-12
SIP,19.5x6.1mm1 10.8V~13.2V 12V 83% 84mA SIP,19.5x6.1mm Power Module/Power Supply ROHSMWDC-DC Power ModulesVO14642AT
DIP-6-40℃~+85℃ 1.5V 250mΩ 2A 330mW 5.3kV 50mA 60V 800us 800us AC,DC One set normally open: 2A (SPST - normally open) DIP-6 Solid State Relays (MOS Output) ROHSVishay IntertechnologySolid State Relays - MOS Output (PhotoMOS)KT12-1A-40L-THT
DIP,10.2x30.2mm-40℃~+100℃ 1 Set Normally Open: 1A (SPST NO) 12V 1A 1kV@AC、1kV@DC DIP,10.2x30.2mm Reed Relays ROHSSTANDEXMEDERReed RelaysLM393P
PDIP-8-18V~-2V、2V~18V 0℃~+70℃ 1.3us 2 25nA 2V~36V 2mV 36V 400uA 5nA ESD protection Open-drain TTL、CMOS PDIP-8 Comparators ROHSTexas InstrumentsComparatorsNE555P
DIP-80℃~+70℃ 100kHz 10mA 4.5V~16V DIP-8 555 Timers / Counters ROHSTexas InstrumentsTimers / Counters
README
README.mdParts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R8, R9, R10, R12, R13, R14, R15, R16, R17, R19, R25 |
| 6 | LED | LED_THT:LED_D5.0mm | D4, D5, D6, D7, D8, D9 |
| 6 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4, H5, H6 |
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D10, D11 |
| 2 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6 |
| 2 | 43650-0216 | Samacsys:43650-02YY_151617 | J3, J7 |
| 2 | 43650-0516 | Samacsys:43650-05YY_151617 | J1, J2 |
| 2 | Q_NMOS_Depletion_GDS | Package_TO_SOT_THT:TO-251-3_Vertical | Q1, Q2 |
| 2 | TestPoint | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | TP1, TP2 |
| 2 | VO14642AT | Samacsys:DIP762W60P254L760H470Q6N | IC2, IC3 |
| 1 | 0.01u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R21 |
| 1 | 2.2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R20 |
| 1 | 200k | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P20.32mm_Horizontal | R1 |
| 1 | 20k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 22k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 43045-1013 | Samacsys:43045-10YY_121314 | J5 |
| 1 | 43650-0416 | Samacsys:43650-04YY_151617 | J4 |
| 1 | 43650-0616 | Samacsys:43650-06YY_151617 | J6 |
| 1 | 47k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R18 |
| 1 | 6.8k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 62V | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 1 | 820 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | Fuse | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P30.48mm_Horizontal | F4 |
| 1 | KT12-1A-40L-THT | Samacsys:KT121A40LTHT | IC4 |
| 1 | LM393P | Samacsys:DIP794W53P254L959H508Q8N | IC1 |
| 1 | NE555P | Samacsys:DIP794W53P254L959H508Q8N | IC5 |
| 1 | Q_PMOS_GDS | Package_TO_SOT_THT:TO-220-3_Vertical | Q4 |
| 1 | SPU01M-12 | Samacsys:SPU01M12 | PS1 |
The 60 most common of 63 parts.
Similar boards
- 2 layers85 × 85 mm

- 2 layers129.4 × 135.1 mm

- 2 layers61 × 27 mm

- 2 layers253 × 169.1 mm

Dragon32
jimbro1000/Dragon32Rev3
This project started as a recreation of the SA2120 CPU Mainboard for the 1982 Dragon Data Dragon 32
171 parts3MIT - 2 layers73 × 66 mm

Przetwora v2
ThertyOne/bird-feeder
Z wyjścia baterii energia trafia do przetwornicy boost 5 V, zbudowanej od podstaw na bazie generatora PWM LMC555 i MOSFETa IRLML6344, która zasila ESP32 i peryferia – serwo sterujące karmnikiem, LEDy oświetleniowe oraz…
34 parts1 - 2 layers253 × 199.1 mm

Dragon32Issue2aSecam
jimbro1000/Dragon32Issue2aSecam
SECAM specific reproduction of the Issue 2 Dragon 32 main board
206 partsMIT - 2 layers253 × 199.4 mm

- 2 layers30 × 40.5 mm

SYNCHRO Booster
h07jonas/SYNCHRO
SYNCHRO System for Yielding Networked CHannel Rail Operation SYNCHRO is a modular, high-performance digital model railroad control ecosystem architecture based on the DCC (Digital Command Control) standard.
10 parts1
Questions
How big is the VR8-ACC PCB PCB?
It measures 140 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the VR8-ACC PCB use?
63 parts, built around the SPU01M-12, VO14642AT, KT12-1A-40L-THT and LM393P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VR8-ACC PCB KiCad files?
From the NYCUVRC/VR8-ACC-PCB repository on GitHub, at the commit this page was made from: the board is VR8-ACC-PCB.kicad_pcb and its schematic VR8-ACC-PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the VR8-ACC PCB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).