

Silkscreen jlc 1mm
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 80
- Pads
- 235
- Tracks, vias
- 420, 171
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Jul 2026
- Updated
- 7 Nov 2026
Overview
Silkscreen jlc 1mm is an open-source printed circuit board by ntakao2006-web, from the ntakao2006-web/RaceCapture repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 63 parts on 80 nets, routed with 420 tracks and 171 vias.
It is built around the ATA6561-GAQW, MCP25625-E/SS and NEO-M9N-00B, with the 74HC595D,118, CC0603KRX7R9BB104 and KT-0805G among its other parts. Its parts include 20 resistors, 14 capacitors, 11 diodes, 7 connectors and 5 ICs.
Main components
12ATA6561-GAQW
SOIC-8-40℃~+150℃ 12uA 4.5V~5.5V 5Mbps 70mA CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversMCP25625-E/SS
SSOP-28-208mil-40℃~+125℃ 10uA 1Mbps 4.5V~5.5V CAN Controller SSOP-28-208mil CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversNEO-M9N-00B
SMD-24P-167dBm -40℃~+85℃ 2.7V~3.6V 24s 2m 36mA@3.0V GPS、BDS、QZSS、Galileo、GLONASS RTC backup power UART、I2C、USB、SPI、JTAG SMD-24P GNSS Modules ROHSu-bloxGNSS Modules74HC595D,118
SOIC-16-40℃~+125℃ 1 100MHz 19ns@4.5V,50pF 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOIC-16 Shift Registers ROHSNexperiaShift RegistersCC0603KRX7R9BB104
0603100nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTKT-0805G
0805-40℃~+85℃ 100mW 120° 2.6V~3.1V 430mcd 513nm~528nm 525nm 5mA Discrete Diode Emerald Green Water Clear 0805 LED Indication - Discrete ROHSHubei KENTO ElecLED Indication - DiscreteCL21A106KAYNNNE
080510uF 25V X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTNUP2105LT1G
SOT-23-55℃~+125℃ 2 200nA 24V 26.7V 30pF 420W@8/20us 43V 8A Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSDOWOESD And Surge Protection (TVS/ESD)XC2EL89COO-114YLC-20M
SMD3225-4P-40℃~+125℃ 12pF 20MHz 70Ω Crystal Oscillator ±10ppm ±80ppm SMD3225-4P Crystals ROHSYXCCrystals25121WJ0270T4E
2512-55℃~+155℃ 1W 200V 27Ω Thick Film Resistor ±100ppm/℃ ±5% 2512 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface MountLQG15HS27NJ02D
04021.7GHz 27nH 350mA 460mΩ 8@100MHz ±5% 0402 Inductors (SMD) ROHSMurataInductors (SMD)PESD5V0F1BL,315-JSM
DFN1006-2L-55℃~+125℃ 0.4pF 1 100nA 20V 3.5A@8/20us 5V 60W@8/20us 8V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 DFN1006-2L ESD and Surge Protection (TVS/ESD) ROHSJSMSEMIUncategorised
README
README.mdRaceCapture互換 自作車載データロガー
RaceCaptureのロギングシステムのうち、ロガー端末部分だけを自作ハードウェア(ESP32)に置き換えるプロジェクト。
まずはここを見てください
- ARCHITECTURE.md — プロジェクト全体の唯一の一次情報源(目的・全体構成・現状ステータス・開発ロードマップ)
- hardware_interface_spec.md — 電気・回路系担当の方向け:入出力インターフェース仕様・相談事項まとめ
- 友人とのミーティング前は hardware_meeting_agenda.md(進め方の道しるべ)も参照
その他の主なドキュメント
- HANDOFF.md — RaceCapture JSON通信プロトコルの実測仕様
- OBD2_SURVEY.md — 実車OBD2/CAN調査の記録
task_phaseX_breakdown.md— 各開発フェーズのサブタスク分解firmware/— ESP32向けファームウェア(PlatformIO / ESP-IDF)
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | logger_v2_custom:C_0603_1608Metric | C1, C4, C5, C6, C7, C8, C9, C10, C12 |
| 8 | 680R | logger_v2_custom:R_0603_1608Metric | R1, R2, R3, R4, R6, R8, R9, R11 |
| 8 | GREEN 0805 | logger_v2_custom:LED_0805_2012Metric_ShieldSilk | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | 10k | logger_v2_custom:R_0603_1608Metric | R5, R10, R12, R17 |
| 4 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | MH1, MH2, MH3, MH4 |
| 3 | 47k | logger_v2_custom:R_0603_1608Metric | R18, R19, R20 |
| 2 | 10uF | logger_v2_custom:C_0805_2012Metric | C13, C14 |
| 2 | 120 | logger_v2_custom:R_0603_1608Metric | R13, R14 |
| 2 | 18pF | logger_v2_custom:C_0603_1608Metric | C2, C3 |
| 2 | 4.7k | logger_v2_custom:R_0603_1608Metric | R15, R16 |
| 2 | 43045-0400 | logger_v2_custom:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J6, J7 |
| 2 | NUP2105LT1G | logger_v2_custom:SOT-23 | D9, D10 |
| 1 | 1uF | logger_v2_custom:C_0603_1608Metric | C11 |
| 1 | 20MHz 12pF | logger_v2_custom:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 27R 1W | logger_v2_custom:R_2512_6332Metric | R7 |
| 1 | 27nH | logger_v2_custom:L_0402_1005Metric | L1 |
| 1 | 74HC595D,118 | logger_v2_custom:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | ATA6561-GAQW | logger_v2_custom:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Analog | logger_v2_custom:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | BNO055_module | logger_v2_custom:AE_BNO055_BO_ShieldSilk | U3 |
| 1 | Digital/PWM | logger_v2_custom:PinSocket_1x08_P2.54mm_Vertical_ShieldSilk | J5 |
| 1 | Digital/PWM | logger_v2_custom:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | MCP25625-E/SS | logger_v2_custom:SSOP-28_5.3x10.2mm_P0.65mm | U5 |
| 1 | NEO-M9N-00B | logger_v2_custom:ublox_NEO | U2 |
| 1 | Power | logger_v2_custom:PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | RF ESD | logger_v2_custom:D_SOD-882 | D11 |
| 1 | S-037-TGG | logger_v2_custom:SMA_S-037-TGG_Horizontal | J1 |
More from ntakao2006-web/RaceCapture
6- 2 layers70.6 × 100 mm

- 4 layers68.7 × 53.4 mm

- 2 layers68.6 × 53.3 mm

- 2 layers68.6 × 53.3 mm

- 2 layers68.6 × 53.3 mm

- 2 layers29 × 18 mm

Similar boards
- 4 layers130 × 110 mm

- 6 layers131 × 125 mm

Sunbeam em7000
Resident-X/brew-state
brew-state: bare-metal C state estimation and forward-horizon profiling for the Sunbeam EM7000. Built with Staircase.
444 partsMIT - 4 layers96 × 90.2 mm

Transceiver
ngrabbs/ember
Open pvpanel.kicadpro with KiCad 10. The project contains the recovered schematic, routed PCB, project-local footprint libraries, and solar-module STEP model.
161 parts1CC0-1.0 - 4 layers150 × 100 mm

Cm4-robo controller
jrseti/roboclaw-cm4-dc-dish-controller
Satellite dish controller using a ROBOCLAW-2X15A-OEM controlled by a Raspberry Pi CM4 module. Powered by DC battery.
292 partsMIT - 4 layers90 × 56.1 mm

K2-cm5-traeger
Gamecard/k2-plus-cm5
K2 Plus CM5 – Creality K2 Plus mit Upstream-Klipper auf einem Raspberry Pi CM5
137 partsGPL-3.0 - 4 layers90 × 66 mm

Iron node
enkhbold470/iron-node
ESP32-S3 industrial gateway: W5500 Ethernet, isolated RS-485 (ADM2587E), CAN, 9-36 V input. 4-layer KiCad 10 board.
83 partsCERN-OHL-S-2.0 - 2 layers84.7 × 75.8 mm

Esp bluepill board
ar216-2355/esp_bluepill_board
できること - DCモーター 6台 駆動 - 電磁弁 4台 駆動 - ステッピングモーター 1台 駆動 - NeoPixel 1台(使えるか未確認) 駆動 - CAN通信可能 - PA10をHIGHにすることでUSB通信可能
71 parts - 4 layers160 × 80 mm

Questions
How big is the Silkscreen jlc 1mm PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Silkscreen jlc 1mm use?
63 parts, built around the ATA6561-GAQW, MCP25625-E/SS, NEO-M9N-00B and 74HC595D,118. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Silkscreen jlc 1mm KiCad files?
From the ntakao2006-web/RaceCapture repository on GitHub, at the commit this page was made from: the board is circuit/logger_v2/output/design_review_20260907/silkscreen_jlc_1mm/source.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Silkscreen jlc 1mm design in my own project?
Its repository states no licence, so its author keeps all rights: ask ntakao2006-web before reusing the design.