4 layers160 × 80 mm
4 layers160 × 80 mm
PIC18F ETH
EBOThor/DTS_BoardDigital to Synchro board
- Size
- 160 × 80 mm
- Copper layers
- 4
- Thickness
- 1.7 mm
- Parts
- 281
- Nets
- 209
- Pads
- 764
- Tracks, vias
- 1,384, 273
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Aug 2024
- Updated
- 28 Oct 2026
Overview
PIC18F ETH is an open-source printed circuit board by EBOThor, from the EBOThor/DTS_Board repository on GitHub, published under the MIT licence. It is a 4-layer board of 160 × 80 mm with 281 parts on 209 nets, routed with 1,384 tracks and 273 vias.
It is built around the ATA6561-GAQW, TPS62A01DRL and TLP241B(F, with the MCP23S17-E/ML, 93AA46BT-I/OT and MCP2515T-E/ML among its other parts. Its parts include 100 resistors, 54 capacitors, 45 connectors, 29 diodes and 26 ICs. It belongs with the PIC boards of this library.
Main components
8
ATA6561-GAQW
SOIC-8-40℃~+150℃ 12uA 4.5V~5.5V 5Mbps 70mA CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
TPS62A01DRL
SOT-563-40℃~+125℃@(TJ) 1 1A 2.4MHz 2.5V~5.5V 20uA 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-563 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
TLP241B(F
DIP-4DIP-4 Solid State Relays (MOS Output) ROHSToshibaSolid State Relays (MOS Output)
MCP23S17-E/ML
QFN-28-EP(6x6)-40℃~+125℃ 1.8V~5.5V 10MHz 16 1uA 3mA 600mV 8 8mA Interrupt Output Reset function、Cascading and address extension SPI QFN-28-EP(6x6) I/O Expanders ROHSMicrochip TechnologyI/O Expanders
93AA46BT-I/OT
SOT-23-6-40℃~+85℃ 1,000,000 cycles 1.8V~5.5V 1Kbit 200 Years 3MHz 6ms Built-in power-on reset (POR)、Built-in write enable latch (WEL)、Power-down/Power-up protection circuit SPI SOT-23-6 EEPROM ROHSMicrochip TechnologyEEPROM
MCP2515T-E/ML
QFN-20-EP(4x4)-40℃~+125℃ 1Mbps 2.7V~5.5V 5mA CAN Controller QFN-20-EP(4x4) CAN Controllers ROHSMicrochip TechnologyCAN Controllers
PESD2USB3UXT-QR
SOT-23(TO-236AB)0.56pF 1nA 3.3V 3.3V 4A@8/20us 6.7V ESD IEC 61000-4-2 Unidirectional SOT-23(TO-236AB) ESD and Surge Protection (TVS/ESD) ROHSNexperiaUncategorised
SRR1208-330YL
SMD,12.7x12.7mm2.8A 3.8A 33uH 62mΩ ±15% SMD,12.7x12.7mm Power Inductors ROHSBournsPower Inductors
README
README.mdDTS_Board
Digital to Synchro board
Parts
281| Qty | Value | Footprint | References |
|---|---|---|---|
| 55 | 200R | Resistor_SMD:R_0603_1608Metric | R3006, R4001, R4002, R4003, R4004, R4005, R4006, R8001, R8002, R8003, R8004, R8005, R8006, R8007, R8008, R8017 +39 |
| 45 | 100n 25V | Capacitor_SMD:C_0603_1608Metric | C2001, C2002, C2003, C2004, C2005, C2006, C2007, C2008, C2009, C2010, C2012, C3003, C4001, C4002, C4003, C4004 +29 |
| 33 | JST,2.54 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J3002, J8001, J8002, J8003, J8004, J8005, J8006, J8007, J8008, J8009, J8010, J8011, J8012, J8013, J8014, J8015 +17 |
| 30 | 10K | Resistor_SMD:R_0603_1608Metric | R2001, R2002, R2004, R2006, R2007, R2008, R2009, R2010, R3005, R4007, R4008, R6001, R6002, R6005, R8009, R8010 +14 |
| 17 | LED G | LED_SMD:LED_0603_1608Metric | D3002, D9001, D9002, D9003, D9004, D9005, D9006, D9007, D9008, D9009, D9010, D9011, D9012, D9013, D9014, D9015 +1 |
| 16 | TLP241B | Package_SO:SO-4_7.6x3.6mm_P2.54mm | U9001, U9002, U9003, U9004, U9005, U9006, U9007, U9008, U9009, U9010, U9011, U9012, U9013, U9014, U9015, U9016 |
| 12 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP2001, TP2002, TP2006, TP2007, TP2008, TP2009, TP2010, TP2011, TP2012, TP3001, TP3003, TP3005 |
| 11 | PESD2USB3UXT-Q | Package_TO_SOT_SMD:SOT-23-3 | D4001, D4002, D4003, D8001, D8002, D8003, D8004, D8005, D8006, D8007, D8008 |
| 9 | JST,2.54 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J2002, J4001, J4002, J4003, J4004, J4005, J4006, J6001, J6002 |
| 5 | TestPoint | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP2005, TP2016, TP3002, TP3004, TP3006 |
| 4 | 10u 50V | Capacitor_SMD:C_0603_1608Metric | C3002, C3004, C3006, C3008 |
| 4 | 49R9 | Resistor_SMD:R_0603_1608Metric | R5003, R5004, R5005, R5006 |
| 4 | Fiducial_05_1 | Fiducial:Fiducial_0.5mm_Mask1mm | FID7001, FID7002, FID7003, FID7004 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H7001, H7002, H7003, H7004 |
| 3 | 10u 10V | Capacitor_SMD:C_0603_1608Metric | C2011, C3005, C3007 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R6003, R6004 |
| 2 | 25Mhz,50ppm | Oscillator:Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm | U2003, U6001 |
| 2 | 2K2 | Resistor_SMD:R_0603_1608Metric | R2003, R3003 |
| 2 | 510K | Resistor_SMD:R_0603_1608Metric | R5001, R5002 |
| 2 | MCP23S17-E/ML | bt_footprints:QFN28_6x6MC_MCH | U4001, U4002 |
| 1 | 100n 100V | Capacitor_SMD:C_0603_1608Metric | C3009 |
| 1 | 120R | Resistor_SMD:R_0603_1608Metric | R6006 |
| 1 | 16K | Resistor_SMD:R_0603_1608Metric | R3001 |
| 1 | 1uH | Inductor_SMD:L_0805_2012Metric | L3002 |
| 1 | 33uH | Inductor_SMD:L_Bourns_SRR1208_12.7x12.7mm | L3001 |
| 1 | 3K | Resistor_SMD:R_0603_1608Metric | R3002 |
| 1 | 4,7uF 100V | Capacitor_SMD:CP_Elec_4x3 | C3001 |
| 1 | 43K | Resistor_SMD:R_0603_1608Metric | R3004 |
| 1 | 6-40V | Connector_Samtec_HPM_THT:Samtec_HPM-02-01-x-S_Straight_1x02_Pitch5.08mm | J3001 |
| 1 | 620R | Resistor_SMD:R_0603_1608Metric | R2005 |
| 1 | 93AA46BT-I/OT | Package_TO_SOT_SMD:SOT-23-6 | U2001 |
| 1 | ATA6561-GAQW | bt_footprints:SOIC8_4P9X3P9MC_MCH | U6003 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2001 |
| 1 | D | Diode_SMD:D_0805_2012Metric | D3001 |
| 1 | LMR51610-Q1 | Package_TO_SOT_SMD:SOT-23-6 | U3001 |
| 1 | MCP2515T-E/ML | bt_footprints:QFN20_4x4MC_MCH | U6002 |
| 1 | PIC18F67J60T-I | bt_footprints:TQFP64_10x10MC_MCH | U2002 |
| 1 | RJ45_LED_ETH_Shielded | bt_footprints:RJ45_LED_Shield | J5001 |
| 1 | TPS62A01 | Package_TO_SOT_SMD:SOT-563 | U3002 |
More from EBOThor/DTS_Board
7- 2 layers167.6 × 81.3 mm
- 2 layers40 × 45 mm
- 2 layers40 × 45 mm
- 4 layers22 × 4 mm
- 2 layers90 × 50 mm
- 2 layers35.1 × 30.1 mm
Similar boards
- 2 layers47.8 × 47.2 mm
Point Signal Box R2
Alan-Lomax/MERG-PCB-Supporting-Documents
Gerbers and Supporting Files for MERG Article on PCB
36 parts - 2 layers97 × 97 mm
- 4 layers140 × 120 mm
PianoMatrice
manvalan/MuonScope
Piano di rivelazione MuonScope con 16 fotodiodi VBPW34S in matrice 4×4 a passo 10 mm, per il bus MIKILAB REV5.1.
490 parts - 2 layers
EV Guardian Carrier
nandan63625/EV-Fleet-Management-System
IoT-based EV Fleet Management System for real-time vehicle monitoring and tracking.
23 parts - 2 layers84.7 × 75.8 mm
Esp bluepill board
ar216-2355/esp_bluepill_board
できること - DCモーター ６台 駆動 - 電磁弁 ４台 駆動 - ステッピングモーター １台 駆動 - NeoPixel １台（使えるか未確認） 駆動 - CAN通信可能 - PA10をHIGHにすることでUSB通信可能
71 parts - 2 layers68.6 × 53.3 mm
- 2 layers155 × 18 mm
- 4 layers26 × 30 mm
Lte m dongle fw
GManSudy/framework-expansion-lte
An LTE-M / NB-IoT cellular modem built into the Framework Laptop Expansion Card form factor, with a native USB-C plug.
32 parts
Questions
How big is the PIC18F ETH PCB?
It measures 160 × 80 mm and has 4 copper layers, 1.7 mm thick.
What parts does the PIC18F ETH use?
281 parts, built around the ATA6561-GAQW, TPS62A01DRL, TLP241B(F and MCP23S17-E/ML. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PIC18F ETH KiCad files?
From the EBOThor/DTS_Board repository on GitHub, at the commit this page was made from: the board is HW/PIC18F_ETH/PIC18F_ETH.kicad_pcb and its schematic HW/CC_Debug/CC_Debug/CC USB hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PIC18F ETH design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).