
MCP2515T-E/ML
Microchip TechnologyExtended
-40℃~+125℃ 1Mbps 2.7V~5.5V 5mA CAN Controller QFN-20-EP(4x4) CAN Controllers ROHS
- Part id
- microchip/MCP2515T-E/ML
- Category
- CAN Controllers
- Package
- QFN-20-EP(4x4)
- Pins
- 20
- In stock
- 8 at JLCPCB (C623189)
- Used on
- 2 open-source boards
Overview
The MCP2515T-E/ML is a CAN Controller made by Microchip Technology in a QFN-20-EP(4x4) package with 21 pins. -40℃~+125℃ 1Mbps 2.7V~5.5V 5mA CAN Controller QFN-20-EP(4x4) CAN Controllers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP2515T-E_ML, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-20_L4.0-W4.0-P0.50-TL-EP2.7, from EasyEDA), ready for a KiCad board. 8 are in stock at JLCPCB (part C623189). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
21| Pin | Name | Type |
|---|---|---|
| 1 | CLKOUT | Unspecified |
| 2 | TX0RTS# | Unspecified |
| 3 | TX1RTS# | Unspecified |
| 4 | NC | Unspecified |
| 5 | TX2RTS# | Unspecified |
| 6 | OSC2 | Unspecified |
| 7 | OSC1 | Unspecified |
| 8 | GND | Unspecified |
| 9 | RX1BF# | Unspecified |
| 10 | RX0BF# | Unspecified |
| 11 | INT# | Unspecified |
| 12 | SCK | Unspecified |
| 13 | NC | Unspecified |
| 14 | SI | Unspecified |
| 15 | SO | Unspecified |
| 16 | CS# | Unspecified |
| 17 | RESET# | Unspecified |
| 18 | VDD | Unspecified |
| 19 | TXCAN | Unspecified |
| 20 | RXCAN | Unspecified |
| 21 | EP | Unspecified |
Open-source boards using it
2- 4 layers160 × 80 mm

- 2 layers

EV Guardian Carrier
nandan63625/EV-Fleet-Management-System
IoT-based EV Fleet Management System for real-time vehicle monitoring and tracking.
23 parts
Parts like it
2MCP2515T-I/ML
QFN-20-EP(4x4)-40℃~+85℃ 1Mbps 1uA 2.7V~5.5V 5mA CAN Controller SPI QFN-20-EP(4x4) CAN Controllers ROHSMicrochip TechnologyCAN ControllersXL2515QF20
QFN-20-EP(4x4)-40℃~+85℃ 1Mbps 2.7V~5.5V 5mA 5uA CAN Controller SPI Single transmission mode、Low-power mode QFN-20-EP(4x4) CAN Controllers ROHSXINLUDACAN Controllers
Questions
Is there a KiCad symbol and footprint for the MCP2515T-E/ML?
Yes. The symbol is EasyEDA_Cloud:MCP2515T-E_ML and the footprint EasyEDA_Cloud:QFN-20_L4.0-W4.0-P0.50-TL-EP2.7, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MCP2515T-E/ML?
QFN-20-EP(4x4), with 21 pins. Its footprint is drawn on this page.
Where is the MCP2515T-E/ML datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MCP2515T-E/ML?
JLCPCB lists it as part C623189, with 8 in stock; the sellers' links on this page open their listings.
What can replace the MCP2515T-E/ML?
Parts like it in the library: the MCP2515T-I/ML by Microchip Technology and the XL2515QF20 by XINLUDA. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MCP2515T-E/ML?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.