Skip to the content
12345678910111213141516171819202122232425262728

MCP25625-E/SS

Microchip TechnologyExtended

-40℃~+125℃ 10uA 1Mbps 4.5V~5.5V CAN Controller SSOP-28-208mil CAN Transceivers ROHS

Part id
microchip/MCP25625-E/SS
Category
CAN Transceivers
Package
SSOP-28-208mil
Pins
28
In stock
89 at JLCPCB (C628816)
Used on
4 open-source boards

Overview

The MCP25625-E/SS is a CAN Transceiver made by Microchip Technology in a SSOP-28-208mil package with 28 pins. -40℃~+125℃ 10uA 1Mbps 4.5V~5.5V CAN Controller SSOP-28-208mil CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP25625T-E_SS, from EasyEDA) and its footprint (Package_SO:SSOP-28_5.3x10.2mm_P0.65mm, from KiCad's library), ready for a KiCad board. 89 are in stock at JLCPCB (part C628816). 4 open-source boards in 3 repositories on GitHub use it.

Symbol

1VIO2NC3CANL4CANH5STBY6Tx1RTS#7Tx2RTS#8OSC29OSC110GND11Rx1BF#12Rx0BF#13INT#14SCK15SI16SO17CS#18RESET#19VDD20TxCAN21RxCAN22CLKOUT23Tx0RTS#24TXD25NC26VSS27VDDA28RXD
EasyEDA_Cloud:MCP25625T-E_SSFrom EasyEDA

Footprint

12345678910111213141516171819202122232425262728
Package_SO:SSOP-28_5.3x10.2mm_P0.65mmFrom KiCad's library

From the datasheet

14
Supply, least
2.7 V · VDD, recommended operating min · p. 68
Supply, most
5.5 V · VDD, recommended operating max · p. 68
Supply, least
4.5 V · VDDA, recommended operating min · p. 71
Supply, absolute maximum
7 V · VDD, absolute max · p. 67
Works from
-40 °C · Operating ambient temperature min · p. 67
Works up to
125 °C · Operating ambient temperature max · p. 67
Junction, hottest
150 °C · Virtual junction temperature max · p. 67
Takes working
20.03 mA · sum of VDD, VDDA and VIO max operating currents, recessive bus · p. 71
Takes at most
80.5 mA · sum of VDD, VDDA and VIO max operating currents, dominant bus · p. 71
Takes asleep
10 µA · Standby current typical, front-page specification · p. 1
Data rate, most
1 Mbit/s · CAN bit frequency max · p. 73
Junction to air (28L-SSOP)
80 K/W · Junction-to-ambient thermal resistance typical · p. 77
Takes working
15 mA · sum of VDD max operating and VDDA/VIO typical recessive currents · p. 68
Takes asleep
23 µA · sum of VDD sleep max and VDDA standby max including VIO · p. 71

What it is and has

13
CAN
CAN 2.0B (ISO11898-1) · p. 1
CAN data rate
Up to 1 Mb/s · p. 1
SPI clock
Up to 10 MHz · p. 1
SPI modes
0,0 and 1,1 · p. 1
Transmit buffers
3, with prioritization and abort features · p. 1
Receive buffers
2 · p. 1
Acceptance filtering
6 filters and 2 masks · p. 1
Interrupt output
1 · p. 1
Package options
SSOP-28L and 6x6 QFN-28L · p. 1
Temperature grade
Extended (E), -40°C to +125°C · p. 1
Protection
Automatic thermal shutdown · p. 1
System suitability
12V and 24V systems · p. 1
CAN controller
Stand-alone CAN 2.0B controller with integrated transceiver · p. 1

Around it

8
res 10 k
between RESET and VDD; Optional RESET pull-up. · p. 5
res 2 to 10 M
between OSC1 and OSC2; Typical feedback resistor RF in the crystal/ceramic resonator oscillator circuit. · p. 28
cap 27 pF
between OSC1 and GND; HS ceramic resonator, 8.0 MHz; design guidance only; verify oscillator performance. · p. 29
cap 22 pF
between OSC1 and GND; HS ceramic resonator, 16.0 MHz; design guidance only; verify oscillator performance. · p. 29
cap 27 pF
between OSC1 and GND; HS crystal oscillator, 4 MHz, C1; design guidance only. · p. 29
cap 22 pF
between OSC1 and GND; HS crystal oscillator, 8 MHz, C1; design guidance only. · p. 29
cap 15 pF
between OSC1 and GND; HS crystal oscillator, 20 MHz, C1; design guidance only. · p. 29
res 1 k to 10 k
between RESET and RC junction; R1 limits current into RESET from external capacitor C during ESD or EOS. · p. 30

Specifications

144
ParameterConditionsAs printedPage
VDD VDDmax 7 V67
VDDA VDDAmax 7 V67
VIO VIOmax 7 V67
DC Voltage at CANH, CANLmin -58 · max 58 V67
DC Voltage at TXD, RXD, STBY w.r.t VSSmin -0.3 V67
DC Voltage at All Other I/Os w.r.t GNDmin -0.3 V67
Transient Voltage on CANH, CANLISO-7637; Figure 7-5min -150 · max 100 V67
Storage temperaturemin -55 · max 150 °C67
Operating Ambient Temperaturemin -40 · max 125 °C67
Virtual Junction Temperature TVJIEC60747-1min -40 · max 150 °C67
Soldering Temperature of Leads10 secondsmax 300 °C67
ESD Protection on CANH and CANL PinsIEC 61000-4-2min -8 · max 8 kV67
ESD Protection on CANH and CANL PinsIEC 801; Human Body Modelmin -8 · max 8 kV67
ESD Protection on All Other PinsIEC 801; Human Body Modelmin -4 · max 4 kV67
ESD Protection on All PinsIEC 801; Machine Modelmin -300 · max 300 V67
ESD Protection on All PinsIEC 801; Charge Device Modelmin -750 · max 750 V67
Supply Voltage VDDCAN controller; Extended (E)min 2.7 · max 5.5 V68
Register Retention Voltage VRETCAN controller; Extended (E)min 2.4 V68
High-Level Input Voltage VIHRxCANmin 2 V68
Low-Level Input Voltage VILRxCAN, TxnRTS Pinsmin -0.3 V68
Low-Level Input Voltage VILSCK, CS, SImin -0.3 V68
Low-Level Output Voltage VOLTxCAN; IOL = +6.0 mA, VDD = 4.5Vmax 0.6 V68
Low-Level Output Voltage VOLRxnBF Pins; IOL = +8.5 mA, VDD = 4.5Vmax 0.6 V68
Low-Level Output Voltage VOLSO, CLKOUT; IOL = +2.1 mA, VDD = 4.5Vmax 0.6 V68
Low-Level Output Voltage VOLINT; IOL = +1.6 mA, VDD = 4.5Vmax 0.6 V68
Input Leakage Current ILIAll I/Os except OSC1 and TxnRTS Pins; CS = RESET = VDD, VIN = VSS to VDDmin -1 · max 1 uA68
Input Leakage Current ILIOSC1 Pinmin -5 · max 5 uA68
Internal Capacitance (all inputs and outputs) CINTTAMB = +25°C, fC = 1.0 MHz, VDD = 0V; Note 1max 7 pF68
Operating Current IDDCAN controller; VDD = 5.5V, FOSC = 25 MHz, FCLK = 1 MHz, SO = Openmax 10 mA68
Standby Current (Sleep mode) IDDSCAN controller; CS, TxnRTS = VDD, Inputs tied to VDD or VSS, -40°C to +125°Cmax 8 uA68
Clock In Frequency FOSCExtended (E); TAMB = -40°C to +125°C; VDD = 2.7V to 5.5V; characterized, not 100% testedmin 1 · max 25 MHz68
Clock In Period TOSCExtended (E); characterized, not 100% testedmin 40 · max 1000 ns68
Duty Cycle (External Clock input) tDUTYTOSH/(TOSH + TOSL); characterized, not 100% testedmin 0.45 · max 0.55 —68
Wake-up Noise Filter tWFExtended (E); TAMB = -40°C to +125°C; VDD = 2.7V to 5.5Vmin 100 ns69
RESET Pin Low Time tRLExtended (E); TAMB = -40°C to +125°C; VDD = 2.7V to 5.5Vmin 2 us69
CLKOUT Pin High Time tHCLKOUTTOSC = 40 ns; Note 1min 10 ns69
CLKOUT Pin Low Time tLCLKOUTTOSC = 40 ns; Note 1min 10 ns69
CLKOUT Pin Rise Time tRCLKOUTMeasured from 0.3 VDD to 0.7 VDD; Note 1max 10 ns69
CLKOUT Pin Fall Time tFCLKOUTMeasured from 0.7 VDD to 0.3 VDD; Note 1max 10 ns69
CLKOUT Propagation Delay tDCLKOUTNote 1max 100 ns69
Clock Frequency FCLKExtended (E); TAMB = -40°C to +125°C; VDD = 2.7V to 5.5Vmax 10 MHz70
CS Setup Time tCSSmin 50 ns70
CS Hold Time tCSHmin 50 ns70
CS Disable Time tCSDmin 50 ns70
Data Setup Time tSUmin 10 ns70
Data Hold Time tHDmin 10 ns70
Clock Rise Time tRNote 1: Characterized, not 100% testedmax 2 us70
Clock Fall Time tFNote 1: Characterized, not 100% testedmax 2 us70
Clock High Time tHImin 45 ns70
Clock Low Time tLOmin 45 ns70
Clock Delay Time tCLDmin 50 ns70
Clock Enable Time tCLEmin 50 ns70
Output Valid from Clock Low tVmax 45 ns70
Output Hold Time tHOmin 0 ns70
Output Disable Time tDISmax 100 ns70
Voltage Range VDDACAN transceiver; VDDA Pin; Extended (E)min 4.5 · max 5.5 V71
Supply Current IDDVDDA Pin; Recessive; VTXD = VDDAtyp 5 · max 10 mA71
Supply Current IDDVDDA Pin; Dominant; VTXD = 0Vtyp 45 · max 70 mA71
Standby Current IDDSVDDA Pin; Includes IIOtyp 5 · max 15 uA71
High Level of the POR Comparator VPORHVDDA Pinmin 3.8 · max 4.3 V71
Low Level of the POR Comparator VPORLVDDA Pinmin 3.4 · max 4 V71
Hysteresis of POR Comparator VPORDVDDA Pinmin 0.3 · max 0.8 V71
Digital Supply Voltage Range VIOVIO Pinmin 2.7 · max 5.5 V71
Supply Current on VIO IIOVIO Pin; Recessive; VTXD = VIOtyp 4 · max 30 uA71
Supply Current on VIO IIOVIO Pin; Dominant; VTXD = 0Vtyp 85 · max 500 uA71
Standby Current IDDSVIO Pin; Note 1typ 0.3 · max 1 uA71
Undervoltage Detection on VIO VUVD(IO)Note 1typ 1.2 V71
CANH, CANL: Recessive Bus Output Voltage VO(R)VTXD = VDDA; No loadmin 2 · max 3 V71
CANH, CANL: Bus Output Voltage in Standby VO(S)STBY = VTXD = VDDA; No loadmin -0.1 · typ 0 · max 0.1 V71
Recessive Output Current IO(R)-24V < VCAN < +24Vmin -5 · max 5 mA71
CANH: Dominant Output Voltage VO(D)TXD = 0; RL = 50 to 65min 2.75 · typ 3.5 · max 4.5 V71
CANL: Dominant Output Voltage VO(D)TXD = 0; RL = 50 to 65min 0.5 · typ 1.5 · max 2.25 V71
Symmetry of Dominant Output Voltage (VDD – VCANH – VCANL) VO(D)(M)VTXD = VSS; Note 1min -400 · typ 0 · max 400 mV71
Dominant: Differential Output Voltage VO(DIFF)VTXD = VSS; RL = 50 to 65; Figure 7-2, Figure 7-4min 1.5 · typ 2 · max 3 V71
Recessive: Differential Output Voltage VO(DIFF)VTXD = VDDA; Figure 7-2, Figure 7-4; RL = 60 unless otherwise specifiedmin -120 · typ 0 · max 12 mV71
Recessive: Differential Output Voltage VO(DIFF)VTXD = VDDA; No load; Figure 7-2, Figure 7-4min -500 · typ 0 · max 50 mV71
CANH: Short-Circuit Output Current IO(SC)VTXD = VSS; VCANH = 0V; CANL: floatingmin -120 · typ 85 mA71
CANH: Short-Circuit Output Current IO(SC)VTXD = VSS; VCANH = 0V; CANL: floating; VDDA = 5V, TAMB = +25°C; Note 1min -100 mA71
CANL: Short-Circuit Output Current IO(SC)VTXD = VSS; VCANL = 18V; CANH: floatingtyp 75 · max 120 mA71
CANL: Short-Circuit Output Current IO(SC)VTXD = VSS; VCANL = 18V; CANH: floating; VDD = 5V, TAMB = +25°C; Note 1max 100 mA71
Recessive Differential Input Voltage VDIFF(R)(I)Normal mode; -12V < V(CANH, CANL) < +12V; see Figure 7-6; Note 2min -1 · max 0.5 V72
Recessive Differential Input Voltage VDIFF(R)(I)Standby mode; -12V < V(CANH, CANL) < +12V; see Figure 7-6; Note 2min -1 · max 0.4 V72
Dominant Differential Input Voltage VDIFF(D)(I)Normal mode; -12V < V(CANH, CANL) < +12V; see Figure 7-6; Note 2min 0.9 V72
Dominant Differential Input Voltage VDIFF(D)(I)Standby mode; -12V < V(CANH, CANL) < +12V; see Figure 7-6; Note 2min 1 V72
Differential Receiver Threshold VTH(DIFF)Normal mode; -12V < V(CANH, CANL) < +12V; see Figure 7-6; Note 2min 0.5 · typ 0.7 · max 0.9 V72
Differential Receiver Threshold VTH(DIFF)Standby mode; -12V < V(CANH, CANL) < +12V; see Figure 7-6; Note 2min 0.4 · max 1.15 V72
Differential Input Hysteresis VHYS(DIFF)Normal mode; see Figure 7-6; Note 1min 50 · max 200 mV72
Common-Mode Input Resistance RINNote 1min 10 · max 30 k72
Common-Mode Resistance Matching RIN(M)VCANH = VCANL; Note 1min -1 · typ 0 · max 1 %72
Differential Input Resistance RIN(DIFF)Note 1min 10 · max 100 k72
Common-Mode Input Capacitance CIN(CM)VTXD = VDDA; Note 1max 20 pF72
Differential Input Capacitance CIN(DIFF)VTXD = VDDA; Note 1max 10 pF72
CANH, CANL: Input Leakage ILIVDDA = VTXD = VSTBY = 0V, VIO = 0V, VCANH = VCANL = 5Vmin -5 · max 5 uA72
Low-Level Input Voltage VILTXD, STBYmin -0.3 V72
High-Level Input Current IIHTXD, STBYmin -1 · max 1 uA72
TXD: Low-Level Input Current IIL(TXD)min -270 · typ -150 · max -30 uA72
STBY: Low-Level Input Current IIL(STBY)min -30 · max -1 uA72
Low-Level Output Voltage VOLRXD; IOL = 4 mA; typical 8 mAmax 0.4 V72
Shutdown Junction Temperature TJ(SD)-12V < V(CANH, CANL) < +12V; Note 1min 165 · typ 175 · max 185 °C72
Shutdown Temperature Hysteresis TJ(HYST)-12V < V(CANH, CANL) < +12V; Note 1min 20 · max 30 °C72
Bit Time tBITCAN transceiver; Extended (E); VDDA = 4.5V to 5.5V, VIO = 2.7V to 5.5V; RL = 60min 1 · max 69.44 us73
Bit Frequency fBITCAN transceivermin 14.4 · max 1000 kHz73
Delay TXD Low to Bus Dominant tTXD-BUSONmax 70 ns73
Delay TXD High to Bus Recessive tTXD-BUSOFFmax 125 ns73
Delay Bus Dominant to RXD tBUSON-RXDmax 70 ns73
Delay Bus Recessive to RXD tBUSOFF-RXDmax 110 ns73
Propagation Delay TXD to RXD tTXD-RXDNegative edge on TXDmax 125 ns73
Propagation Delay TXD to RXD tTXD-RXDPositive edge on TXDmax 235 ns73
Delay Bus Dominant to RXD (Standby mode) tFLTR(WAKE)Standby modemin 0.5 · typ 1 · max 4 us73
Delay Standby to Normal mode tWAKENegative edge on STBYmin 5 · typ 25 · max 40 us73
Permanent Dominant Detect Time tPDTTXD = 0Vtyp 1.25 ms73
Permanent Dominant Timer Reset tPDTRThe shortest Recessive pulse on TXD or CAN bus to reset permanent Dominant timertyp 100 ns73
Specified Temperature Range TAmin -40 · max 125 C77
Operating Temperature Range TAmin -40 · max 125 C77
Storage Temperature Range TAmin -65 · max 150 C77
Thermal Resistance, 28L-SSOP JA28L-SSOPtyp 80 C/W77
Transient Voltage on CANH, CANL (ISO-7637)Figure 7-5min -150 · max 100 V67
Virtual Junction Temperature, TVJ (IEC60747-1) TVJmin -40 · max 150 °C67
ESD Protection on CANH and CANL Pins (IEC 61000-4-2)min -8 · max 8 kV67
ESD Protection on CANH and CANL Pins (IEC 801; Human Body Model)min -8 · max 8 kV67
ESD Protection on All Other Pins (IEC 801; Human Body Model)min -4 · max 4 kV67
ESD Protection on All Pins (IEC 801; Machine Model)min -300 · max 300 V67
ESD Protection on All Pins (IEC 801; Charge Device Model)min -750 · max 750 V67
Supply Voltage VDDExtended (E): TAMB = -40°C to +125°Cmin 2.7 · max 5.5 V68
Register Retention Voltage VRETmin 2.4 V68
Operating Current IDDVDD = 5.5V, FOSC = 25 MHz, FCLK = 1 MHz, SO = Openmax 10 mA68
Standby Current (Sleep mode) IDDSCS, TxnRTS = VDD, Inputs tied to VDD or VSS, -40°C to +125°Cmax 8 uA68
Clock In Frequency FOSCExtended (E): TAMB = -40°C to +125°C; VDD = 2.7V to 5.5V; characterized, not 100% testedmin 1 · max 25 MHz68
Clock In Period TOSCExtended (E): TAMB = -40°C to +125°C; VDD = 2.7V to 5.5V; characterized, not 100% testedmin 40 · max 1000 ns68
Wake-up Noise Filter tWFExtended (E): TAMB = -40°C to +125°C; VDD = 2.7V to 5.5Vmin 100 ns69
RESET Pin Low Time tRLExtended (E): TAMB = -40°C to +125°C; VDD = 2.7V to 5.5Vmin 2 us69
Clock Frequency FCLKExtended (E): TAMB = -40°C to +125°C; VDD = 2.7V to 5.5Vmax 10 MHz70
Clock Rise Time tRNote 1max 2 us70
Clock Fall Time tFNote 1max 2 us70
Voltage Range VDDAVDDA Pinmin 4.5 · max 5.571
Supply Current on VIO IIORecessive; VTXD = VIOtyp 4 · max 30 uA71
Supply Current on VIO IIODominant; VTXD = 0Vtyp 85 · max 500 uA71
CANL: Dominant Output Voltage VO(D)RL = 50 to 65min 0.5 · typ 1.5 · max 2.25 V71
Recessive: Differential Output Voltage VO(DIFF)VTXD = VDDA; Figure 7-2, Figure 7-4min -120 · typ 0 · max 12 mV71
Low-Level Input Voltage VILDIGITAL INPUT PINS (TXD, STBY)min -0.3 V72
High-Level Input Current IIHDIGITAL INPUT PINS (TXD, STBY)min -1 · max 1 uA72
Low-Level Output Voltage VOLRECEIVE DATA (RXD) OUTPUT; IOL = 4 mA; typical 8 mAmax 0.4 V72
Bit Time tBITExtended (E): TAMB = -40°C to +125°C; VDDA = 4.5V to 5.5V, VIO = 2.7V to 5.5V; RL = 60min 1 · max 69.44 us73
Bit Frequency fBITmin 14.4 · max 1000 kHz73

Pins, by the datasheet

28
1 VIO
Digital I/O supply for CAN transceiver. · p. 4
2 NC
No connection. · p. 4
3 CANL
CAN low-level voltage I/O. · p. 4
4 CANH
CAN high-level voltage I/O. · p. 4
5 STBY
Standby mode input. · p. 4
6 Tx1RTS
TXB1 request-to-send. · p. 4
7 Tx2RTS
TXB2 request-to-send. · p. 4
8 OSC2
External oscillator output. · p. 4
9 OSC1
External oscillator input. · p. 4
10 GND
CAN controller ground. · p. 4
11 Rx1BF
RxB1 interrupt. · p. 4
12 Rx0BF
RxB0 interrupt. · p. 4
13 INT
Interrupt output. · p. 4
14 SCK
SPI clock input. · p. 4
15 SI
SPI data input. · p. 4
16 SO
SPI data output. · p. 4
17 CS
SPI chip select input. · p. 4
18 RESET
Reset input. · p. 4
19 VDD
Power for CAN controller. · p. 4
20 TxCAN
Transmit output to CAN transceiver. · p. 4
21 RXCAN
Receive input from CAN transceiver. · p. 4
22 CLKOUT
Clock output/SOF. · p. 4
23 Tx0RTS
TXB0 request-to-send. · p. 4
24 TXD
Transmit data input from CAN controller. · p. 4
25 NC
No connection. · p. 4
26 VSS
CAN transceiver ground. · p. 4
27 VDDA
Power for CAN transceiver. · p. 4
28 RXD
Receive data output to CAN controller. · p. 4

Open-source boards using it

4
  • 4 layers96 × 90.2 mmTransceiver, the printed circuit board in 3D

    Transceiver

    ngrabbs/ember

    Open pvpanel.kicadpro with KiCad 10. The project contains the recovered schematic, routed PCB, project-local footprint libraries, and solar-module STEP model.

    161 parts1CC0-1.0
  • 4 layers68.7 × 53.4 mmLogger v2, the printed circuit board in 3D

    Logger v2

    ntakao2006-web/RaceCapture

    98 parts1

Questions

Is there a KiCad symbol and footprint for the MCP25625-E/SS?

Yes. The symbol is EasyEDA_Cloud:MCP25625T-E_SS and the footprint Package_SO:SSOP-28_5.3x10.2mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP25625-E/SS?

SSOP-28-208mil, with 28 pins. Its footprint is drawn on this page.

Where is the MCP25625-E/SS datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP25625-E/SS?

JLCPCB lists it as part C628816, with 89 in stock; the sellers' links on this page open their listings.

Which open-source boards use the MCP25625-E/SS?

4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.