2 layers147.3 × 76.2 mm
2 layers147.3 × 76.2 mm
Xyz display board
nianzhiyu/scope-clock- Size
- 147.3 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 163
- Nets
- 104
- Pads
- 380
- Tracks, vias
- 649, 1
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 Feb 2024
- Updated
- 10 Sep 2024
Overview
Xyz display board is an open-source printed circuit board by nianzhiyu, from the nianzhiyu/scope-clock repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 147.3 × 76.2 mm with 163 parts on 104 nets, routed with 649 tracks and 1 via.
It is built around the UF4007, MPSA44 and MPSA56, with the 100UF25V, IRF540N and MPSA06 among its other parts. Its parts include 55 resistors, 35 capacitors, 29 diodes, 16 transistors and 6 ICs. It belongs with the lEDs and displays boards of this library.
Main components
7
UF4007
DO-41-50℃~+150℃ 1.7V@1A 1A 1kV 30A 5uA@1kV 75ns DO-41 Fast Recovery / High Efficiency Diodes ROHSMDDFast Recovery / High Efficiency Diodes
MPSA44
TO-92-55℃~+150℃ 1 NPN 100nA 200 300mA 400V 400mV、500mV、750mV 625mW 6V NPN TO-92 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)MPSA56
TO-92-55℃~+150℃ 1 PNP 100 100nA 250mV 4V 500mA 50MHz 625mW 80V PNP TO-92 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
100UF25V
CAP-SMD_BD6.3-L6.6-W6.6-LS7.2-FDCAP-SMD_BD6.3-L6.6-W6.6-LS7.2-FD SMT ROHSJLCPCB AssemblyUncategorised
IRF540N
TO-2201 N-channel 1.35nF 100V 130W 280pF 33A 35mΩ@10V 4V 52nC@10V 85pF N-Channel TO-220 MOSFETs ROHSOSENMOSFETsMPSA06
TO-92-55℃~+150℃ 1 NPN 100 100MHz 100nA 250mV 4V 500mA 625mW 80V NPN TO-92 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
P6KE18A
DO-15DO-15 ESD and Surge Protection (TVS/ESD) ROHSJiangsu Changjing Electronics Technology (CJ)Uncategorised
README
README.mdscope-clock
A digital clock using oscilloscope CRT display. Derived from cathode corner's design: http://www.cathodecorner.com/sc200c.html
Parts
163| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1N4148 | sc_11:DO-35-H6_8 | D10, D11, D12, D13, D16, D17, D18, D19, D22, D23, D26, D27, D30, D31, D34, D35 |
| 12 | UF4007 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9, D14, D15, D20 |
| 10 | 100R | sc_11:RES-H10_16-D2_5L7_5 | R54, R55, R56, R57, R59, R60, R61, R64, R65, R67 |
| 8 | 220K | sc_11:RES-H10_16-D2_5L7_5 | R28, R29, R35, R36, R37, R38, R44, R45 |
| 8 | 22nF | Capacitor_SMD:C_1206_3216Metric | C9, C10, C11, C12, C13, C14, C15, C26 |
| 8 | 5.1K | sc_11:RES-H10_16-D2_5L7_5 | R16, R18, R30, R31, R32, R39, R40, R41 |
| 8 | MPSA44 | sc_11:TO-92C | Q6, Q7, Q8, Q9, Q12, Q13, Q14, Q15 |
| 7 | 0.1uF | sc_11:C_Rect_L5.5mm_W4.0mm_P5.00mm | C2, C3, C29, C34, C35, C36, C38 |
| 6 | 1K | sc_11:RES-H10_16-D2_5L7_5 | R52, R53, R58, R62, R63, R66 |
| 5 | 100K | sc_11:RES-H10_16-D2_5L7_5 | R10, R24, R48, R49, R50 |
| 4 | 10K | sc_11:RES-H10_16-D2_5L7_5 | R6, R68, R69, R70 |
| 4 | 10uF_25V | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C16, C17, C18, C19 |
| 4 | 2K | sc_11:RES-H10_16-D2_5L7_5 | R33, R34, R42, R43 |
| 4 | MPSA56 | sc_11:TO-92C | Q4, Q5, Q10, Q11 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10uF_25V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C22, C24, C33 |
| 3 | 1uF | sc_11:C_Rect_L5.5mm_W4.0mm_P5.00mm | C5, C32, C37 |
| 3 | LOGO | sc_11:high_voltage | G***, G***, G*** |
| 2 | 100uF_25V | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C27, C28 |
| 2 | 100uH | sc_11:L_Radial_D5.5mm_P2.00mm | L1, L2 |
| 2 | 150K | sc_11:RES-H10_16-D2_5L7_5 | R7, R8 |
| 2 | 1M | sc_11:RP-3362S | RV1, RV3 |
| 2 | 1uF_50V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C23, C25 |
| 2 | 2.2uF_400V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C20, C21 |
| 2 | LM78L05_TO92 | Package_TO_SOT_THT:TO-92_Inline_Wide | U6, U8 |
| 1 | 0.1R | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R26 |
| 1 | 1000uF_25V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 100pF | sc_11:C_Rect_L5.5mm_W4.0mm_P5.00mm | C8 |
| 1 | 10R | sc_11:RES-H10_16-D2_5L7_5 | R2 |
| 1 | 1M | sc_11:RES-H10_16-D2_5L7_5 | R51 |
| 1 | 2.2nF | sc_11:C_Rect_L5.5mm_W4.0mm_P5.00mm | C4 |
| 1 | 2.49K | sc_11:RES-H10_16-D2_5L7_5 | R9 |
| 1 | 2M | sc_11:RP-3362S | RV2 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q2 |
| 1 | 2N3906 | Package_TO_SOT_THT:TO-92_Inline | Q16 |
| 1 | 3.3K | sc_11:RES-H10_16-D2_5L7_5 | R4 |
| 1 | 330R | sc_11:RES-H10_16-D2_5L7_5 | R19 |
| 1 | 470pF | sc_11:C_Rect_L5.5mm_W4.0mm_P5.00mm | C7 |
| 1 | 5.1M | sc_11:RES-H10_16-D2_5L7_5 | R15 |
| 1 | 6N137 | Package_DIP:DIP-8_W7.62mm | U3 |
| 1 | 7.5K | sc_11:RES-H10_16-D2_5L7_5 | R1 |
| 1 | F1A | sc_11:FUSE_D3.0mm_L8.3mm_P10.16mm | F2 |
| 1 | F2A | sc_11:FUSE_D3.0mm_L8.3mm_P10.16mm | F1 |
| 1 | Heatsink_Pad_2Pin | sc_11:HS2-23_5X16X25 | HS1 |
| 1 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q3 |
| 1 | LM79L05_TO92 | Package_TO_SOT_THT:TO-92_Inline_Wide | U7 |
| 1 | Lamp_Neon | sc_11:NL_D5.0mm | NE1 |
| 1 | MPSA06 | sc_11:TO-92L_Inline_Wide_MPSA06 | Q1 |
| 1 | P6KE18A | Diode_THT:D_DO-15_P10.16mm_Horizontal | D39 |
| 1 | T-SC-1 | sc_11:T-SC-1 | T1 |
| 1 | UC3843_DIP8 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | VH-2 | Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J1 |
| 1 | VH-5 | Connector_JST:JST_VH_B5P-VH_1x05_P3.96mm_Vertical | J6 |
| 1 | VH-6 | Connector_JST:JST_VH_B6P-VH_1x06_P3.96mm_Vertical | J2 |
| 1 | VOLTAGE_MULTIPLIER | sc_11:VM-SC-1 | U9 |
| 1 | XH-6 | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J7 |
| 1 | XH-8 | Connector_JST:JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J5 |
More from nianzhiyu/scope-clock
1Similar boards
- 2 layers107.1 × 101.7 mm
The Leach Amp
TiebeDeclercq/Leach-Amp
This is a complete pcb and schematic of the Leach Amp based on: https://leachlegacy.ece.gatech.edu/lowtim/
122 partsMIT - 2 layers150 × 100 mm
/Amplifier/100W_30V_Amplifier_Circuit/100W_30V_Amplifier_Circuit.kicad_pcb.jpg?size=s&soon)
100W 30V Amplifier Circuit
chdsolinap/ece-projects
ECE hardware and electronics projects — PCB design, circuit prototypes, and embedded systems built at PLM.
51 parts - 4 layers147.8 × 77 mm
2xBLDCPicoV3
AmericanRework/Pico-2x-BLDC
One RP2040 Pico drives two brushless motors! SimpleFOC + Halls + 2304 drivers + TO-220 mosfets or IGBTs. Plugs directly into 450x automower motors.
135 parts7 - 2 layers110 × 84 mm
PKE
neriyashalom/PKE-Car-System
Final project - ESP32-S3 based PKE system for vehicle access and ignition
90 parts1 - 2 layers159.5 × 142.5 mm
Archivos Placa
Antozjr/Super-5-RTOS
Sistema CAN distribuido para un Renault 5 GTL (BCM + Gateway)
83 partsMIT - 2 layers107 × 56 mm
Secu3 vag mono
borislav968/s3mono
ЭСУД SECU-3 поддерживает использование регуляторов холостого хода на основе шагового привода или электромагнита (ШИМ).
112 parts - 2 layers92 × 70 mm
Texecom power reset
jd710313/texecom-power-reset
A single board with an ESP32-C3 (Tasmota) and two on-board relays. It sits inside a Texecom Premier Elite 64-W housing and can remotely "hard power reset" the panel by briefly cutting both its battery and 16VAC feeds.
45 parts - 2 layers120 × 90 mm
ReceptorASV
karolhof/ASV-PCBs
Actualizado el 05/10/2026 para KiCad 10. El esquema conserva cables continuos entre la alimentación, el ESP32, el LoRa y los dos conectores UART. Un punto marca una unión; un cruce sin punto no conecta.
31 parts
Questions
How big is the Xyz display board PCB?
It measures 147.3 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Xyz display board use?
163 parts, built around the UF4007, MPSA44, MPSA56 and 100UF25V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Xyz display board KiCad files?
From the nianzhiyu/scope-clock repository on GitHub, at the commit this page was made from: the board is hardware/crt_xyz_display/xyz_display_board.kicad_pcb and its schematic hardware/control_board/cir_gen_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Xyz display board design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).