Skip to the content
12

P6KE18A

Jiangsu Changjing Electronics Technology (CJ)Extended

DO-15 ESD and Surge Protection (TVS/ESD) ROHS

Part id
cj/P6KE18A
Category
Uncategorised
Package
DO-15
Pins
2
In stock
5,980 at JLCPCB (C5294528)
Used on
11 open-source boards

Overview

The P6KE18A is an uncategorised made by Jiangsu Changjing Electronics Technology (CJ) in a DO-15 package with 2 pins. DO-15 ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Regulators:Diode Zener, from CERN's library) and its footprint (ICs And Semiconductors THD:DO-15, from CERN's library), ready for a KiCad board. 5,980 are in stock at JLCPCB (part C5294528). 11 open-source boards in 11 repositories on GitHub use it.

Symbol

Regulators:Diode ZenerFrom CERN's library

Footprint

12
ICs And Semiconductors THD:DO-15From CERN's library

Pinout

2
The pins of the P6KE18A
PinNameType
1CPassive
2APassive

Open-source boards using it

11See all 11
  • 2 layers110 × 84 mmPKE, the printed circuit board in 3D

    PKE

    neriyashalom/PKE-Car-System

    Final project - ESP32-S3 based PKE system for vehicle access and ignition

    90 parts1
  • 2 layers159.5 × 142.5 mmArchivos Placa, the printed circuit board in 3D

    Archivos Placa

    Antozjr/Super-5-RTOS

    Sistema CAN distribuido para un Renault 5 GTL (BCM + Gateway)

    83 partsMIT
  • 2 layers107 × 56 mmSecu3 vag mono, the printed circuit board in 3D

    Secu3 vag mono

    borislav968/s3mono

    ЭСУД SECU-3 поддерживает использование регуляторов холостого хода на основе шагового привода или электромагнита (ШИМ).

    112 parts
  • 2 layers92 × 70 mmTexecom power reset, the printed circuit board in 3D

    Texecom power reset

    jd710313/texecom-power-reset

    A single board with an ESP32-C3 (Tasmota) and two on-board relays. It sits inside a Texecom Premier Elite 64-W housing and can remotely "hard power reset" the panel by briefly cutting both its battery and 16VAC feeds.

    45 parts
  • 2 layers120 × 90 mmReceptorASV, the printed circuit board in 3D

    ReceptorASV

    karolhof/ASV-PCBs

    Actualizado el 05/10/2026 para KiCad 10. El esquema conserva cables continuos entre la alimentación, el ESP32, el LoRa y los dos conectores UART. Un punto marca una unión; un cruce sin punto no conecta.

    31 parts
  • 2 layers78.5 × 69 mmIrin, the printed circuit board in 3D

    Irin

    MGlauser/Irin

    The (holy) Watcher that never sleeps. Watching over your 12v battery system and integrates with HomeAssistant.

    15 partsMIT
  • 2 layers66.5 × 50.2 mmRC Multiswitch ESP32-C3-POS, the printed circuit board in 3D

    RC Multiswitch ESP32-C3-POS

    mnorden81/RC-Multiswitch-ESP32-C3

    CRSF Multiswitch 8 Kanaele, ESP32-C3 SuperMini, KiCad und Firmware

    32 parts
  • 2 layers66.5 × 50.6 mmRC Multiswitch ESP32-S3-NEG, the printed circuit board in 3D

    RC Multiswitch ESP32-S3-NEG

    mnorden81/RC-Multiswitch-ESP32-S3

    CRSF Multiswitch 8 Kanaele, ESP32-S3-Zero, KiCad und Firmware

    33 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the P6KE18A?

Yes. The symbol is Regulators:Diode Zener and the footprint ICs And Semiconductors THD:DO-15, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the P6KE18A?

DO-15, with 2 pins. Its footprint is drawn on this page.

Where can I order the P6KE18A?

JLCPCB lists it as part C5294528, with 5,980 in stock; the sellers' links on this page open their listings.

What can replace the P6KE18A?

Parts like it in the library: the P6KE27A by AnBon, the P6KE15A by BORN, the P6KE27A by BORN and the P6KE15A by Jiangsu Changjing Electronics Technology (CJ). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the P6KE18A?

11 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.