

- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 76
- Pads
- 309
- Tracks, vias
- 533, 150
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 May 2025
- Updated
- 16 May 2025
Overview
Trx is an open-source printed circuit board by MTalon63, from the MTalon63/mobile-ground-station repository on GitHub. It is a 4-layer board of 50 × 50 mm with 74 parts on 76 nets, routed with 533 tracks and 150 vias.
It is built around the RP2040, E22-400M22S and RFX2401C, with the SX1280IMLTRT, TPS56339DDC and W25Q128JVSIQ among its other parts. Its parts include 32 capacitors, 17 resistors, 6 ICs, 5 connectors and 3 inductors. It belongs with the RP2040 boards of this library.
Main components
7RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)E22-400M22S
SMD,20x14mm-147dBm 1.8V~3.7V 100mA 22.3dBm 6.5mA 7km Continuous frequency coverage LoRa SPI Stamp Hole Antenna、IPEX interface SMD,20x14mm LoRa Modules ROHSChengdu Ebyte Elec TechLoRa ModulesRFX2401C
QFN-16-EP(3x3)-10dB -12dB -15dB -40℃~+85℃ -8dB -8dBm 2.4GHz~2.5GHz 22dBm 2V~3.6V ZigBee 集成低噪声放大器、集成射频开关、集成功率放大器、集成射频滤波器、集成功率检测器 QFN-16-EP(3x3) RF Front End Circuits ROHSSkyworks SolutionsRF Front End CircuitsSX1280IMLTRT
QFN-24-EP(4x4)-132dBm -40℃~+85℃ 1.8V~3.7V 12.5dBm 2.4GHz 2.4GHz~2.5GHz 24mA 8.2mA SPI、UART Supports RSSI function transceiver QFN-24-EP(4x4) RF Transceiver ICs ROHSSEMTECHRF Transceiver ICsTPS56339DDC
TSOT-23-6-40℃~+125℃@(TJ) 1 3A 4.5V~24V 500kHz 800mV~16V 98uA Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHLFCN-2500D+
SMD3216-4P2.95GHz 50Ω SMD3216-4P Ceramic Filters ROHSMini-CircuitsCeramic Filters
README
README.mdmobile-ground-station
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C10, C12, C14, C15, C16, C17, C18, C19, C20, C25, C26, C27, C28, C29, C30 +3 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R12, R16, R17 |
| 4 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R14, R15 |
| 4 | MH | MountingHole:MountingHole_2.7mm_M2.5_Pad | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R11, R13 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C13, C31 |
| 3 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9, C24 |
| 2 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
| 1 | 0.3p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23 |
| 1 | 12MHz | Crystal:Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mm | Y1 |
| 1 | 15u | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L3 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C22 |
| 1 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21 |
| 1 | 30.9k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 4.7u | Inductor_SMD:L_Vishay_IHLP-2525 | L1 |
| 1 | 52MHz TCXO | ECS-TXO-20CSMV4:OSC_ECS-TXO-20CSMV4-520-AN-TR | Y2 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJ | SW2 |
| 1 | E22-400M22S | E22-900M22S:E22-900M22S | U6 |
| 1 | Ext Power | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | L | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L2 |
| 1 | LFCN-2500 | Filter:Filter_Mini-Circuits_FV1206 | FL1 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJ | SW1 |
| 1 | RFX2401C | SamacSys_Parts:QFN50P300X300X60-17N-D | U5 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SBAND_ACT | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | SB_U.FL | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J2 |
| 1 | SWDIO | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | SX1280IMLTRT | SamacSys_Parts:QFN50P400X400X100-25N-D | U4 |
| 1 | TPS56339DDC | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | UHF_ACT | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | USB_C | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
Similar boards
- 6 layers23 × 19.3 mm

- 6 layers39.5 × 39.5 mm

TD1 2.4G
Paschalis/UAV-TelemetryLink
Receiver and transmitter solution for GCS using ELRS, mLRS, and MAVLink for reliable telemetry and control.
63 parts11MIT - 8 layers38 × 38 mm

Kolibri v0.5
bastian2001/Kolibri-FC-Hardware
Hardware for the Kolibri Flight Controller. 30mm/20mm FC with RP2350 + ELRS onboard
221 parts8GPL-3.0 - 4 layers37.5 × 36 mm

TD M10S LSM
Paschalis/fc-plus-sensor-module
FC Plus is a modular add-on board for UAV flight controllers, providing advanced telemetry, GPS, object avoidance (ToF, Sonar, IR), and LED indicators for status feedback.
85 parts1GPL-3.0 - 4 layers25.8 × 20.7 mm

Sx1280-breakout
MTalon63/sx1280-breakout
SX1280 LoRa module breakout module to test stuff, as they are only available from chinese sellers
30 parts - 4 layers63.4 × 78.3 mm

- 2 layers50 × 100 mm

Spoke
FeruzTopalov/spoke
Standalone LoRa-based real-time off-grid relative GPS navigation for group of up to 5 people. Improved version of LRNS Eleph
143 parts16GPL-3.0 - 2 layers40 × 20 mm

B E22 900M22S BRK R1.0
Boardoza/Boardoza_E22-900M22S_Long_Range_LoRa_Breakout_Board
Long-range LoRa® breakout board based on the Ebyte E22-900M22S and Semtech SX1262 transceiver.
13 parts3CC-BY-SA-4.0
Questions
How big is the Trx PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Trx use?
74 parts, built around the RP2040, E22-400M22S, RFX2401C and SX1280IMLTRT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Trx KiCad files?
From the MTalon63/mobile-ground-station repository on GitHub, at the commit this page was made from: the board is trx/pcb/pcb.kicad_pcb and its schematic trx/pcb/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Trx design in my own project?
Its repository states no licence, so its author keeps all rights: ask MTalon63 before reusing the design.