.kicad_pcb.jpg?size=s&soon)
INSIGHT (conflicted copy 2026-09-14 211920)
K-Eckert15/ARES
ARES capstone with PHOBOS and DEIMOS subsystems

ARES capstone with PHOBOS and DEIMOS subsystems
PHOBOS Control SMA is an open-source printed circuit board by K-Eckert15, from the K-Eckert15/ARES repository on GitHub. It is a 4-layer board of 63.4 × 78.3 mm with 87 parts on 118 nets, routed with 623 tracks and 351 vias.
It is built around the RP2040, MAPS-010144-TR0500 and PD2328J5050S2HF, with the SX1280IMLTRT, W25Q128JVSIQ and LSM6DS3 among its other parts. Its parts include 33 capacitors, 15 resistors, 14 ICs, 8 connectors and 3 diodes. It belongs with the RP2040 boards of this library.
ARES capstone with PHOBOS and DEIMOS subsystems
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0402_1005Metric | C7, C11, C18, C19, C21, C23, C24, C25, C26, C30, C31, C36 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C13, C16, C17 |
| 4 | MAPS-010144-TR0500 | MAPS-010144-TR0500:QFN50P400X400X100-25N-D | IC4, IC5, IC6, IC7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric | R2, R9, R10 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C37, C38, C39 |
| 3 | PD2328J5050S2HF | PD2328J5050S2HF:PD2328J5050S2HF | IC8, IC9, IC10 |
| 2 | 1.2p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8, C10 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C6 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C14, C15 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C20, C22 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R13, R19 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R3 |
| 2 | D | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 1 | .5p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4 |
| 1 | .8P | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C0 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 100p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 15u | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L4 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 2.5n | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L2 |
| 1 | 330k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 3n | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 470n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | ANT1 | SMA_J_P_GF_RA_SM1:SAMTEC_SMA-J-P-GF-RA-SM1 | J5 |
| 1 | ANT2 | SMA_J_P_GF_RA_SM1:SAMTEC_SMA-J-P-GF-RA-SM1 | J6 |
| 1 | ANT3 | SMA_J_P_GF_RA_SM1:SAMTEC_SMA-J-P-GF-RA-SM1 | J1 |
| 1 | ANT4 | SMA_J_P_GF_RA_SM1:SAMTEC_SMA-J-P-GF-RA-SM1 | J2 |
| 1 | BATT | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J4 |
| 1 | BOOT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | C1E-52.000-10-1012-X-M | C1E-52.000-10-1012-X-M:XTAL_C1E-52.000-10-1012-X-M | Y1 |
| 1 | GPIO19 | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP11 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | LSM6DS3 | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U6 |
| 1 | MPL3115A2ST1 | MPL3115A2ST1:MPL3115A2ST1 | IC1 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U4 |
| 1 | RX | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP10 |
| 1 | SCL | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP8 |
| 1 | SDA | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP7 |
| 1 | SX1280IMLTRT | SX1280IMLTRT:XCVR_SX1280IMLTRT | U1 |
| 1 | TPS60403DBV | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | TX | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP9 |
| 1 | TXRX | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J7 |
| 1 | USB4056-03-A_REVA2 | USB4056_03_A:GCT_USB4056-03-A_REVA2 | J3 |
| 1 | W25Q128JVSIQ | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
.kicad_pcb.jpg?size=s&soon)
K-Eckert15/ARES
ARES capstone with PHOBOS and DEIMOS subsystems










lhr-solar/DataAcq-EnvBreakoutPCB
Breakout Board for Data Acquisition's environment breakout PCB



oresat/oresat-dxwifi-hardware
OreSat hardware for high speed data communications using 2.4 GHz WiFi.

sckzor/RadarProject
This repository will hold the schematics, code and other stuff regaurding my 2.4 GHz radar project.



Mig-M27/Avionics-PCBs
Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.
It measures 63.4 × 78.3 mm and has 4 copper layers, 1.56 mm thick.
87 parts, built around the RP2040, MAPS-010144-TR0500, PD2328J5050S2HF and SX1280IMLTRT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the K-Eckert15/ARES repository on GitHub, at the commit this page was made from: the board is PHOBOS/PHOBOS_Control_SMA/PHOBOS_Control_SMA.kicad_pcb and its schematic DEIMOS/INSIGHT/INSIGHT (conflicted copy 2026-09-14 235045).kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask K-Eckert15 before reusing the design.