
Signal conditioner
msharp176/LoRa-Water-Quality-Management-System
Repository for the LoRa Water Quality Management System, Penn State Harrisburg Senior Electrical Engineering Capstone Design Course, Fall 2025

Repository for the LoRa Water Quality Management System, Penn State Harrisburg Senior Electrical Engineering Capstone Design Course, Fall 2025
LoRa Water Quality Management System Sensor Node is an open-source printed circuit board by msharp176, from the msharp176/LoRa-Water-Quality-Management-System repository on GitHub. It is a 4-layer board of 130 × 80 mm with 162 parts on 135 nets, routed with 1,355 tracks and 1,321 vias.
It is built around the LM2660MX, MX25L3233FM2I-08Q and TL082, with the TLV9144ID, TPS63000DRC and LSF0102DP among its other parts. Its parts include 47 capacitors, 45 resistors, 15 ICs, 15 diodes and 10 connectors. It belongs with the radio and wireless and home automation and IoT boards and the RP2040 and RP2350 boards of this library.
This repository contains all hardware, firmware, software, and documentation associated with the gateway, sensor node, and supporting prototypes used throughout this project. The directory structure is organized to clearly separate production-ready components from prototyping artifacts, while providing comprehensive traceability for PCB designs, firmware, simulations, and supporting tools.
Code and PCB designs for the system gateway.
Dashboard Python code for the gateway dashboard and system monitoring utilities.
LoRa Receiver PCB design files, RP2350 firmware, and a console-logging Python script for a dedicated LoRa receiver module.
Neural Network Code and related resources for the neural network implementation used in the system.
Various PCB designs and test code used during early prototyping and validation phases.
Master directory for the final Sensor Node design, including PCB files, firmware, documentation, and test artifacts.
Production firmware implementation for the Sensor Node.
Bin
Final binary executable for the RP2350 microcontroller (.uf2).
Lib Custom-implemented C drivers for the sensor node.
Stash
Top-level gateway/node firmware source files. These are not included in the build unless a file is manually integrated into main.c.
Sys_Utils Abstracted system-level modules, including LoRa communications, RDT3.0 implementation, and other project-specific utilities.
Tests Code used to validate custom drivers and subsystem behaviors.
Datasheets, PCB design write-ups, and annotated Bill-of-Materials (BOM) for the final Sensor Node PCB.
Complete KiCAD implementation of the sensor node PCB.
Simulation files and output results for the analyses performed during development.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11, C12, C15, C17, C22, C25, C26, C27, C28, C29, C30, C31, C32, C33, C34 +11 |
| 14 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14 |
| 13 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R15, R16, R22, R30, R31, R33, R39, R40, R41, R42, R43, R44 |
| 7 | T5V0S5A-7 | Diode_SMD:D_SOD-523 | D1, D2, D3, D6, D8, D9, D10 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R13, R14, R21, R24 |
| 5 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C20, C21, C23, C24 |
| 4 | 3.3M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R35, R36, R37, R38 |
| 4 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D11, D12, D14, D15 |
| 4 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.5mm | TP15, TP16, TP17, TP18 |
| 3 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R28, R45 |
| 3 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5, R7 |
| 3 | 100u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C37, C38, C48 |
| 3 | 165R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19, R20 |
| 3 | MCP4651T-503E_ST | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U13, U15, U16 |
| 3 | OQ0332510000G | LWQMS:OQ0332510000G | J1, J4, J5 |
| 2 | 15p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C19 |
| 2 | 2.2uH | LWQMS:IND_LQH3NPZ2R2MMEL | L3, L4 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 27R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R26 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R8 |
| 2 | 4.99k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R32, R34 |
| 2 | 47uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C6 |
| 2 | B240AE-13 | Diode_SMD:D_SMA_Handsoldering | D4, D5 |
| 2 | C | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C14, C16 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J9 |
| 2 | TPS63000 | LWQMS:CONV_TPS63000DRCR | U9, U10 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C36 |
| 1 | 2.2n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C35 |
| 1 | 2.4p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 200k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 3.3u | LWQMS:AOTA-B201610S3R3-101-T | L2 |
| 1 | 33R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23 |
| 1 | 4.7M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29 |
| 1 | 4p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 560k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 75R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 1 | 910k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | ABM8-272-T3 | LWQMS:ABM8-272-T3 | Y1 |
| 1 | CONBNC002 | LWQMS:LINX_CONBNC002 | J3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | Core1262 HF | LWQMS:Core1262 | U4 |
| 1 | ESDARF02-1BU2CK | Diode_SMD:D_0201_0603Metric_Pad0.64x0.40mm_HandSolder | D13 |
| 1 | L | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 1 | LM2660MX | LWQMS:SOIC_208MIL_WIN-M | U12 |
| 1 | LOGO | LOGO | G*** |
| 1 | LSF0102 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U3 |
| 1 | MCP3425Axx-xCH | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | MX25L3233FM2I-08Q | LWQMS:SOIC127P790X216-8N | U5 |
| 1 | OQ0232510000G | LWQMS:OQ0232510000G | J2 |
| 1 | RP2350_60QFN | LWQMS:RP2350-QFN-60-1EP_7x7_P0.4mm_EP3.4x3.4mm_ThermalVias | U8 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | SMA-J-P-X-RA-TH1 | LWQMS:SAMTEC_SMA-J-P-X-RA-TH1 | J8 |
| 1 | T3V3S5A-7 | Diode_SMD:D_SOD-523 | D7 |
| 1 | TL082 | LWQMS:SOIC_208MIL_WIN-M | U11 |
| 1 | TLV9144 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U14 |
| 1 | TMUX1309 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U2 |
| 1 | Tactile Pushbutton | LWQMS:SW4_1825910-B_TEC | SW1 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J7 |
| 1 | W25Q128JVSIQ TR | LWQMS:SOIC_208MIL_WIN-M | U7 |
The 158 most common of 162 parts.

msharp176/LoRa-Water-Quality-Management-System
Repository for the LoRa Water Quality Management System, Penn State Harrisburg Senior Electrical Engineering Capstone Design Course, Fall 2025

msharp176/LoRa-Water-Quality-Management-System
Repository for the LoRa Water Quality Management System, Penn State Harrisburg Senior Electrical Engineering Capstone Design Course, Fall 2025

msharp176/LoRa-Water-Quality-Management-System
Repository for the LoRa Water Quality Management System, Penn State Harrisburg Senior Electrical Engineering Capstone Design Course, Fall 2025

msharp176/LoRa-Water-Quality-Management-System
Repository for the LoRa Water Quality Management System, Penn State Harrisburg Senior Electrical Engineering Capstone Design Course, Fall 2025

msharp176/LoRa-Water-Quality-Management-System
Repository for the LoRa Water Quality Management System, Penn State Harrisburg Senior Electrical Engineering Capstone Design Course, Fall 2025

ROAR-QUTRC/perseus-v3
The code base for the QUT Robotics Club ROAR teams rover Perseus starting 2026


i2hm/micro_climate_station
Open the KiCad project using KiCad 7 and above.




xyphro/I3CBlaster
Raspberry pico / RP2040 based USB to I3C converter with Python support

prusa3d/PRUSA_Laser_filament_sensor
Filament presence and velocity detection using a PAT9125EL optical laser movement sensor, operating at 850nm.
It measures 130 × 80 mm and has 4 copper layers, 1.61 mm thick.
162 parts, built around the LM2660MX, MX25L3233FM2I-08Q, TL082 and TLV9144ID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the msharp176/LoRa-Water-Quality-Management-System repository on GitHub, at the commit this page was made from: the board is Sensor Node/pcb layout/kicad files/LoRa Water Quality Management System Sensor Node.kicad_pcb and its schematic Gateway/LoRa Receiver/pcb/lwqms_receiver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask msharp176 before reusing the design.