Skip to the content
2 layers203.7 × 67.3 mmPortable efhw, the printed circuit board in 3D
Size
203.7 × 67.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
3
Pads
15
Tracks, vias
18, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
2 Sep 2024
Updated
2 Sep 2024

Overview

Portable efhw is an open-source printed circuit board by aussiegeek, from the aussiegeek/portable-efhw repository on GitHub. It is a 2-layer board of 203.7 × 67.3 mm with 5 parts on 3 nets, routed with 18 tracks and 0 vias.

It is built around the CONBNC002. Its parts include 2 connectors and 1 capacitor.

Main components

1

Parts

5
QtyValueFootprintReferences
1100pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
1AntennaConnector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm_Relief2xAE1
1Conn_CoaxialConnector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_HorizontalJ1
1GroundConnector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm_Relief2xJ3
1~ProjectLocal:FerriteCoreT1

Similar boards

  • 2 layers73.2 × 56 mm28mhz new, the printed circuit board in 3D

    28mhz new

    BenBean18/RadioNotes

    I'm sure I'll think of more things to add, this is a WIP.

    44 parts1
  • 4 layers130 × 80 mmLoRa Water Quality Management System Sensor Node, the printed circuit board in 3D

    LoRa Water Quality Management System Sensor Node

    msharp176/LoRa-Water-Quality-Management-System

    Repository for the LoRa Water Quality Management System, Penn State Harrisburg Senior Electrical Engineering Capstone Design Course, Fall 2025

    162 parts
  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0

Questions

How big is the Portable efhw PCB?

It measures 203.7 × 67.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Portable efhw use?

5 parts, built around the CONBNC002. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Portable efhw KiCad files?

From the aussiegeek/portable-efhw repository on GitHub, at the commit this page was made from: the board is portable-efhw.kicad_pcb and its schematic portable-efhw.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Portable efhw design in my own project?

Its repository states no licence, so its author keeps all rights: ask aussiegeek before reusing the design.