Skip to the content
PCBKitNew board
12345678

LSF0102DP

Nexperia

2-Bit Bidirectional Multi-Voltage Level Translator; Open-Drain; Push-Pull

nexperia/LSF0102DP
Category
Uncategorised
Package
TSSOP8
Pins
8

Overview

The LSF0102DP is an uncategorised made by Nexperia in a TSSOP8 package with 8 pins. 2-Bit Bidirectional Multi-Voltage Level Translator; Open-Drain; Push-Pull.

PCBKit's library has its KiCad symbol (Analog & Interface:LSF0102DCUR, from CERN's library) and its footprint (Package_SO:TSSOP-8_4.4x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 10 open-source boards in 8 repositories on GitHub use it.

Symbol

VREFAGNDVREFBEN8A13A24VREFA2GND1B16B25VREFB7
Analog & Interface:LSF0102DCURFrom CERN's library

Footprint

12345678
Package_SO:TSSOP-8_4.4x3mm_P0.65mmFrom KiCad's library

Pinout

8
The pins of the LSF0102DP
PinNameType
1GNDPower in
2VREFAPower in
3A1Input/output
4A2Input/output
5B2Input/output
6B1Input/output
7VREFBPower in
8ENInput

Open-source boards using it

All 10
  • 2 layers17.9 × 26.2 mmLevelTranslatorXiaoRp2040, the printed circuit board in 3D

    LevelTranslatorXiaoRp2040

    xyphro/I3CBlaster

    Raspberry pico / RP2040 based USB to I3C converter with Python support

    16 parts96MIT
  • 2 layers22 × 10 mmLaser sensor, the printed circuit board in 3D

    Laser sensor

    prusa3d/PRUSA_Laser_filament_sensor

    Filament presence and velocity detection using a PAT9125EL optical laser movement sensor, operating at 850nm.

    13 parts31
  • 6 layers34 × 30.2 mmUSB LiDAR VL53L9, the printed circuit board in 3D

    USB LiDAR VL53L9

    RemiFM/USB-LiDAR-VL53L9

    USB accessory device with VL53L9 Time of Flight sensor (dToF 3D LiDAR) & 6-axis IMU

    72 parts24MIT
  • 6 layers177.7 × 96.6 mmCentrifuge, the printed circuit board in 3D

    Centrifuge

    vgacentrifuge/pcb

    The repository for designing the PCB for the VGA-mixer in TDT4295

    399 parts1
  • 4 layers76.5 × 76.5 mmAMF Generator, the printed circuit board in 3D

    AMF Generator

    MagGenix/AMF-Generator

    A digitally controlled push-pull converter designed for generation of an alternating magnetic field (AMF). THIS DESIGN IS INCOMPLETE.

    76 partsCERN-OHL-S-2.0
  • 4 layers130 × 80 mmLoRa Water Quality Management System Sensor Node, the printed circuit board in 3D

    LoRa Water Quality Management System Sensor Node

    msharp176/LoRa-Water-Quality-Management-System

    Repository for the LoRa Water Quality Management System, Penn State Harrisburg Senior Electrical Engineering Capstone Design Course, Fall 2025

    162 parts
  • 8 layers120 × 75 mmZynq board, the printed circuit board in 3D

    Zynq board

    xrpbot/xrpcam-hardware

    571 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/nexperia/LSF0102DP" title="LSF0102DP in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/nexperia/LSF0102DP.jpg" alt="LSF0102DP" width="1200" height="900">
A picture that opens the part, for a README
[![LSF0102DP](https://pcbkit.io/embed/parts/nexperia/LSF0102DP.jpg?size=s)](https://pcbkit.io/parts/nexperia/LSF0102DP)

Questions

Is there a KiCad symbol and footprint for the LSF0102DP?

Yes. The symbol is Analog & Interface:LSF0102DCUR and the footprint Package_SO:TSSOP-8_4.4x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LSF0102DP?

TSSOP8, with 8 pins. Its footprint is drawn on this page.

What can replace the LSF0102DP?

Parts like it in the library: the LTC726XT8/R8 by Linearin, the AO8814-TP by TECH PUBLIC, the TPM8205AET8 by TECH PUBLIC and the SD8190 by WAVE. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LSF0102DP?

10 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8