Skip to the content
11

TPS63000DRC

Texas Instruments

Part id
ti/TPS63000DRC
Category
Uncategorised
Pins
17
Used on
24 open-source boards

Overview

The TPS63000DRC is an uncategorised made by Texas Instruments with 11 pins.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS63000, from KiCad's library) and its footprint (Package_SON:Texas_DRC0010J, from KiCad's library), ready for a KiCad board. 24 open-source boards in 20 repositories on GitHub use it.

Symbol

1VOUT2L23PGND4L15VIN6EN7PS/SYNC8VINA9GND10FB
Regulator_Switching:TPS63000From KiCad's library

Footprint

11
Package_SON:Texas_DRC0010JFrom KiCad's library

Pinout

11
The pins of the TPS63000DRC
PinNameType
1VOUTPower out
2L2Input
3PGNDPower in
4L1Input
5VINPower in
6ENInput
7PS/SYNCInput
8VINAPower in
9GNDPower in
10FBInput
11PGNDPassive

Open-source boards using it

24See all 24
  • 2 layers67 × 100 mmNpr revB, the printed circuit board in 3D

    Npr revB

    slintak/NPR70

    The New Packet Radio on 70 cm band. Based on the project NPR from F4HDK.

    136 parts23GPL-3.0
  • 2 layers50 × 30 mmPL18 int multiprotocol, the printed circuit board in 3D

    PL18 int multiprotocol

    richardclli/DIY-PL18-InternalMPM

    An internal MPM (Multi-Protocol Module) for PL18 Mod

    23 parts3GPL-3.0
  • 4 layers152.4 × 63.5 mmKrecek, the printed circuit board in 3D

    Krecek

    mordae/krecek

    bash # Prepare build for Krecek cmake -B build src -G Ninja

    166 parts2Unlicense
  • 2 layers62 × 129 mmEsp32-main, the printed circuit board in 3D

    Esp32-main

    nicolaeandreivasile/bike-embedded-app

    Embedded application for bikes that collect and display various riding data.

    93 parts1
  • 4 layersDronie, the printed circuit board in 3D

    Dronie

    Aadi775/MicroDrone

    81 parts
  • 2 layers50.8 × 101.6 mmCASE, the printed circuit board in 3D

    CASE

    awetzelkern/CASE

    Miminal flight computer designed to be a stepping-stone into creating PCB hardware and software for a fully custom thrust-vectored rocket.

    57 parts
  • 2 layers39.3 × 51.7 mmDevboard, the printed circuit board in 3D

    Devboard

    bobis1/devboard

    I made this project because I wanted some experience working with devboards before I start something more complex. I also wanted to make something where a microcontroller was on a devboard already.

    45 parts
  • 4 layers74.1 × 130 mmBadge secsea V1 1, the printed circuit board in 3D

    Badge secsea V1 1

    cchaloin/HIP_SecSea

    Hack In Provence badge for SecSea

    132 parts

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the TPS63000DRC?

Yes. The symbol is Regulator_Switching:TPS63000 and the footprint Package_SON:Texas_DRC0010J, both drawn on this page. PCBKit places them on a board for you when you design with it.

What can replace the TPS63000DRC?

Parts like it in the library: the TPS63000-Q1DRC by Texas Instruments and the TPS63002DRC by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS63000DRC?

24 boards in 20 repositories on GitHub; the most starred are listed on this page, with their KiCad files.